Topic: Xbox Backup Creator v2.3 (Read 3260 times)

jmmitche · « **Reply #75 on:** November 18, 2006, 02:34:00 PM »

So after you extract the game with XBC, all you have to do is burn it with the program of your choice?

Or is there some special steps inbetween?

rameysblackbelt · « **Reply #76 on:** November 18, 2006, 02:53:00 PM »

QUOTE(TinkeringAndTampering @ Nov 17 2006, 11:46 PM)

Redline, while making DOA Xtreme 2, I noticed a little message about the layer 1 shift (not that but something like that) being unexpectedly off, I compared the lba's and it was off by 4. I believe I saw this in imgburn. I'm not trying to blame anyone, I just want to point it out. It really does suck to not know which burning option to choose. These are expensive coasters. Thanks as always though, let me know if there's anything more I can do to contribute. By the way, I made this new name recently so I'm not a noob.

I ALSO HAVE PROBLEMS WITH THE DOA XREME2 EVEN WITH THE SWAP METHOD DO I SMELL A NEW COPY RITE PROTECTION IF SO WE NEED TO BE LOOKING

johnyb62 · « **Reply #77 on:** November 19, 2006, 12:58:00 PM »

Different problem for me. It gets about half way through reading, and the application just stops responding. Has anyone else had this? I am using this in an external usb connected case, maybe this is attributing to the problem... Anyone else sucessfuly using this via external case instead of connected internaly?

05flhri · « **Reply #78 on:** November 19, 2006, 02:12:00 PM »

I'm using a Dell notebook with my sh-d162c and dvr111d in external encloseures attached via usb 2.0.

No concerns present. XBC works great, and best of all, no coasters!!

328iGuy · « **Reply #79 on:** November 19, 2006, 01:38:00 PM »

QUOTE(johnyb62 @ Nov 19 2006, 02:29 PM)

Different problem for me. It gets about half way through reading, and the application just stops responding. Has anyone else had this? I am using this in an external usb connected case, maybe this is attributing to the problem... Anyone else sucessfuly using this via external case instead of connected internaly?

Are you sure the drive is set on MASTER inside the case and not on cable select or slave?

That could very well be the issue, check it out.

TeeO · « **Reply #80 on:** November 19, 2006, 02:46:00 PM »

First off, I love this program, very well done and simple.

I have a problem, however. The first backup I tried to burn with the program burned fairly quickly (under 30 mins) and worked perfectly, but the next 3 have taken nearly 2 hours each to burn. The "Drive" column in the middle of the window fluxuates up and down every second or so and it takes for ever. Does anyone have any suggestions on what I may be doing wrong? The dvd's work perfectly when finished, but it's taking forever...

rameysblackbelt · « **Reply #81 on:** November 19, 2006, 02:54:00 PM »

i got mine to work i just had to make sure i made my own ss from my game using the swap method and using the xbox backup creator i had to set the program make sure its made fro my type dvd im using in reading it al went smooth

lickwid · « **Reply #82 on:** November 21, 2006, 11:31:00 PM »

QUOTE(jmmitche @ Nov 18 2006, 01:05 PM)

So after you extract the game with XBC, all you have to do is burn it with the program of your choice?

Or is there some special steps inbetween?

I have the same question. I've ripped the GAME.iso file from my original, and also ripped the SS.bin, PFI.bin, and DMI.bin files. I normally have burned my backups using CloneCD. What program can I use to inject the SS, PFI, and DMI files into the ISO to burn? Before, I was using DVDInfoPro, ISOBuster, and the batch file that came with the Xtreme firmware distro, but that usually had the VIDEO file separate. This rip seems to keep the VIDEO with the GAME file all in one. Thanks in advance.

This post has been edited by lickwid: Nov 22 2006, 07:31 AM

Heet · « **Reply #83 on:** November 21, 2006, 11:56:00 PM »

There is no problem with DOAX2.

I mean other than it being a shitty game, but ya it backs up fine.

rameysblackbelt · « **Reply #84 on:** November 22, 2006, 06:39:00 AM »

QUOTE(Heet @ Nov 22 2006, 07:27 AM)

There is no problem with DOAX2.
I mean other than it being a shitty game, but ya it backs up fine.

it cause lots problems to ur 360 i can count 4 people i know that it freezes up no matter how u back it up eve my orginals does and it messes my 360 up sometime thats a fact jack

tpitsikas · « **Reply #85 on:** November 22, 2006, 12:36:00 PM »

i have been usine xbc for a few weeks now with no issues at all, untill yesterday i encountered my first coaster.

i am using the dvr-111d and the current issue i have appears to be burning related, at various stages during the b

urn the left hand "file" column drops down to nothing and xbc crashes and windows stops responding. The burner is set to master with DMA enabled.

What are the known issues if any that causes this bar to drop?

PS thanks to redline for all your hard work and persistence

edlimym · « **Reply #86 on:** November 22, 2006, 04:58:00 PM »

QUOTE(tpitsikas @ Nov 23 2006, 03:43 AM)

i have been usine xbc for a few weeks now with no issues at all, untill yesterday i encountered my first coaster.

i am using the dvr-111d and the current issue i have appears to be burning related, at various stages during the b

urn the left hand "file" column drops down to nothing and xbc crashes and windows stops responding. The burner is set to master with DMA enabled.

What are the known issues if any that causes this bar to drop?

PS thanks to redline for all your hard work and persistence

hi, i encountered this problem during my 2nd time burning, so i switched to imgburn program, don't forget to manually insert the layer break for xbox360 and xbox1 game discs respectively.

ezmoney · « **Reply #87 on:** November 22, 2006, 07:43:00 PM »

after many successful 360 backups I'm having trouble with halo 2...I'm using a toshiba ms28 with the new firmware...anyone having trouble getting this to backup

a flute · « **Reply #88 on:** November 23, 2006, 06:06:00 AM »

Redline - Kick ass tool!

All - I had a lot of the same problems described here, slow write speeds, program crashing, high cpu utlization, etc.

I have an Asus P2B-E and a LiteOn SHW-160P6S

I always assumed the IDE controller was on the Intel ICH8R chipset. The only thing I have on the PATA/IDE side is the dvd burner. I started looking into it and noticed it's in PIO mode, no matter what I do I can't get it in DMA. I then read in the manual (what a concept, RTFM) that it's on the jmicron chip and not the Intel chipset. I had never installed the jmicron drivers because I didn't think I was using it. Needless to say, after installing the drivers all is now well.

HTH's someone.

ian99rt · « **Reply #89 on:** November 23, 2006, 09:51:00 AM »

Well I've been doing some reading and just trying to make sure I understand how this program is going to work.....

I have a 47d Hitachi Drive with Garyopa's 2.3 stealth firmware. This is a one stop, button pushing ripper that will make a good iso for me? Just set the booktype and burn it

Author Topic: Xbox Backup Creator v2.3 (Read 3260 times)