Print

[Redline99]

the DVD+R DL with Enable0800.iso on it goes into the TS-H943A. Power the TS-H943A with that dvd in the drive, wait 15-30 seconds, then power up the PC.  If the TS-H943A is compatible with your chipset then it should continue booting without any problems.

[gcompton]

TheSmooth1
You should power off PC and XBOX
Insert 0800.iso DVD into XBOX and allow about 10-20 secods for it to finish
Then power on your PC
While PC is booting you should see your drive show up in the BIOS Preboot screen
Once in windows you should see XBOx DVD Drive in My Computer

Then use Redline99's awesome tool.  Works like a champ

[TheSmooth1]

QUOTE(gcompton @ Dec 4 2006, 07:36 PM)

TheSmooth1
You should power off PC and XBOX
Insert 0800.iso DVD into XBOX and allow about 10-20 secods for it to finish
Then power on your PC
While PC is booting you should see your drive show up in the BIOS Preboot screen
Once in windows you should see XBOx DVD Drive in My Computer

Then use Redline99's awesome tool.  Works like a champ

ok thank u very much i see the tsst drive in the program now is there a tutorial for this or wut am i doin wrong i made a back up used clonecd burned it and then when i played it in the xbox it says unreadable im usin memorex dvd+R DL disck i have a memorex driver i've made several backups all workin fine except this one should i have deleted the first line in the .dvd file when i open it with notepad or leave as is thank u all for the help.....

[keystroke]

I went to burn a backup of xxxxxxx and when I open the .dvd file in Xbox Backup Creator the program says "we are expecting a file size of 7.xxgb and your file only has 6.xxgb" anyone know if its still okay to burn ?? SFV says its perfectly fine,  QuickPAR says 100% okay too. anyone know if I burn in another program will it work or should I forget about it?

[Redline99]

It's probably missing the video section.  Use the stealth check on the ISO tools tab and see what it says. If that doesn't work open up the image in IsoBuster or a hex editor and look around.

But don't burn it as it is probably not valid as it is right now.

[Messa]

Hi folks, sorry to jump in with my first post being a question.

I have been burning disks without trouble using XBC and a pioneer 110, every disk that passed the stealth check burned and played fine. However I have been tinkering a bit (not with the pioneer or XBC) while installing a bitsetting firmware on a Sony writer so I can use it with XBC. I am not saying that has caused the problem but now every disk I try and burn I get (just after the 'initializing drive' message) : LUN not ready; Long write in progress. this message repeats until the disk finishes, and then the weird thing is they seem to play ok. What have I fecked up, anyone please help?
Thanks, Messa.

 

PS I get the message with the Pioneer that worked fine previously, not the Sony.

[danejadee]

hi guys im about to invest in a SH-D162C 2morow and i was wondering if I need really do need a pioneer burner 111d to burn discs?? I have a external LG DL burner and a samsung DL burner as my internal drive. should I save my money and just use my current burners?? thanks for your time and redline keep up the great work and support!!!

[Threepw00d]

QUOTE(danejadee @ Dec 16 2006, 07:44 AM)

hi guys im about to invest in a SH-D162C 2morow and i was wondering if I need really do need a pioneer burner 111d to burn discs?? I have a external LG DL burner and a samsung DL burner as my internal drive. should I save my money and just use my current burners?? thanks for your time and redline keep up the great work and support!!!

Hi danejadee,

No its not absolutely necessary to buy a Pioneer 111d to burn your backups. Other DVD burners may also work just fine. But IN CASE your backups don't work, even after XBC 2.3 reports that your image passed all checks, then it might be that your burner is causing a problem.

Personally, I have burnt backups successfully using my Plextor PX-716UF external DVD burner as well as my Compaq Presario V6000's LG DVD burner ( model GMA-4082N ) on cheapo Office Depot DVD+RDL media (I lucked out and got 25-pack for $5).

The recommendation is for people who want to have the absolutely perfect long lasting DVD backups and are willing to pay a bit extra for the perfect DVD burner and Verbatim DL media. With media this cheap, I personally don't mind low reliability and would rather not spend extra on the perfect hardware. Others hold different points of view, so to each his own. Its up to you to buy a Pioneer if you want, but your LG AND Samsung, both will PROBABLY work just fine.

[danejadee]

Great thanks mate!! I'll give it a shot!!

[grandparagon]

I have the SH-D162C and Pioneer 111d with no problems backing up xbox360 games. im looking to backup some of my xbox1 games and it appears that i do it basically the same way.

My only question is media. i have the latest 4.2 firmware also, but will i need to burn xbox1 games to a dual layer? or can i use single layer if the game fits on one?

[danejadee]

so when you back up with the xbb creator and the shd162c firmware hack do ya still need to use ya ss sectors merger/wxripper software to backup up ya games??Or is it as simple as just using xbox bkup creator and img burn??(Ss SECTORS DOWNLOAD NOT NEEDED?) Im abit of a noob at the moment when it comes to this stuff..Any help/.advice would be great ! tHANKS

[sosotiit]

Hi Redline, I am having problem backing up star trek legacy using v 2.3. and SH-D162C.

See this post.

 It does not seem to see the game partition.

I have no problem extracting separately SS, DMI, PFI and the xdvdfs generates a dump.


here is the log I get??
Xbox Backup Creator v2.3 Build:0185 By Redline99

Found ODD: LITE-ON DVDRW SHM-165H6S HV9N at [E]
   Additional Info: 2006/07/07 15:08
Found ODD: TSSTcorp DVD-ROM SH-D162C TS04 at [F]
   Additional Info: XB360 KREON V0.81
Getting media info [F]
   Media Type: Not Present
Getting media info [F]
   Uknown Partition size. Used bytes = 5.32 MB
   Media Type: DVD-ROM
   Bytes Used: 5.32 MB (5,578,752 bytes)
   Uknown Partition size. Used bytes = 5.32 MB
Starting read process...
   Cancelling due to unknown partition
Getting media info [F]
   Uknown Partition size. Used bytes = 5.32 MB
   Media Type: DVD-ROM
   Bytes Used: 5.32 MB (5,578,752 bytes)
   Read failed
   Uknown Partition size. Used bytes = 5.32 MB
Getting media info [F]
   Media Type: Not Present
Getting media info [F]
   Media Type: DVD-ROM
   Bytes Used: 7.05 GB (7,572,881,408 bytes)
Starting read process...
   Cancelling due to unknown partition
Getting media info [F]
   Uknown Partition size. Used bytes = 5.32 MB
   Media Type: DVD-ROM
   Bytes Used: 5.32 MB (5,578,752 bytes)
   Read failed
   Uknown Partition size. Used bytes = 5.32 MB

any idea what can cause this,
Itried all my other originals and I can stiil extract them so My pc setup does not seem the problem

rgs, soso

[lifesaflaw123]

what does it mean when xbc says this to me:

Setting layer 0 capacity at: 1913760 sectors
   Power On, or Bus Device Reset occurred; Trying to recover.
   Continuing on after 6/29/00 Bus Reset Error
   Power On, or Bus Device Reset occurred; Trying to recover.
   Continuing on after 6/29/00 Bus Reset Error
   Power On, or Bus Device Reset occurred; Trying to recover.

[SnoopX]

Just wanted to say thanks for a great app.

This post has been edited by SnoopX: Dec 20 2006, 10:13 AM

[tamaratimmers]

QUOTE(SnoopX @ Dec 20 2006, 10:07 AM)

Just wanted to say thanks for a great app.

same thing here!!! thnxx!!