Print

[Redline99]

GuntherMP5- Great, glad to hear it worked! Would you mind sending me the log that shos the message you mentioned?  Through PM is fine as to not clutter up the thread. Thanks!

[itchy]

Well I figured it out.  After all the updating, my drive was forced to PIO transfer mode instead of DMA.  Uninstalling the controller channel per the Workaround section below did the trick.

http://support.micro...p;Product=winxp

[Redline99]

itchy - Thank you for posting the info for others

[comhen]

Just before I start GREAT WORK Redline99!

My Orginal (Fight night round 3) has been distoryed and now I want to make a backup from the backup I already made, But I get an error when I try to get the security Sector from the backup.


Action: Read Security sector
Sense Error: 5/30/02
UNKNOWN ERROR
CBD: READ DVD STRUCTURE
0xAD 00 FF 02 FD FF FE 00 08 00 01 C0


Dose any one know why?

[Redline99]

The app isn't designed to make a backup of a backup.  Use a different app to create an iso (anthing really) and then manually set the layer break.

[MrX_Cuci]

Hi,

Great app. Just created my first backup and it works, although it seems like the writing process is not optimized for my burner. I first used your programm to write to a DVD+R DL and the intro movie of the game keeps hanging. (skipping the intro before hanging is possible and the game works) I wrote the same image using CloneCD and the game works like a charm. What info do you need from my recorder in order to get it supported better?

Keep on the good work...

MrX_Cuci

[sniffinpoprocks]

Getting media info [D]
   Media Type: DVD+R DL (Blank, Manufactured by MKM)
   Bytes Available: 358 KB (366,592 bytes)
Getting media info [E]
   Media Type: DVD-ROM
   Bytes Used: 6.87 MB (7,206,912 bytes)
Getting media info [D]
   Media Type: DVD+R DL (Blank, Manufactured by MKM)
   Bytes Available: 358 KB (366,592 bytes)
Getting media info [E]
   Media Type: DVD-ROM
   Bytes Used: 6.87 MB (7,206,912 bytes)
   <-- Security Sector Details -->
   Source Drive: SH-D162C    


the game (amped3) rips fine, but it wont burn because the prog detects the disc as having only 358KB and wont write. Gives message: "media cannot hold the final expected image size..."
I then went into cloneCD with the same media in the drive and burned the same image I just ripped and all was well(tested fine).
I tried another blank and it's giving the same space error(358KB). Media is Verbatium DL +R Photo Printible.

[Redline99]

Thanks for the info, I'll try to see what causes that.

[sadalius]

Thanks for the hard work on this app Redline99. It works perfectly with my setup on box 360 games and regular xbox games. I get speeds up to 12x with speed boost enabled. Somewhere around 4x without speed boost. Haven't had any troubles to speak of using Verbatim DL +r disks.

Thanks again Redline99!!

[jabroniekilla]

can you use this app to rip and burn games using the 360 drive and a burner?  or do you have to have the samsung drive to read the games?

[cerealkillajme]

QUOTE

Redline99 released a new version of his tool that will allow you to easily dump, create/patch and burn Xbox and Xbox 360 images with full support for SS, DMI and PFI using Xbox/Xbox360 drives with an (C4E/OPA) Xtreme SS-extracting FW or with the SH-D162C PC-drive using Kreon's latest alternative FW .

[jabroniekilla]

sorry for the dumb question.  Thanks for the response.

[Redline99]

i_love_to_tsop - what does DVDInfo say about the empty disk, what does it report as the free space? Nero too??  There are several people with that issue.  If I can figure out the cause of it I will release an update.

[i_love_to_tsop]

hey readline here the info it desplays on dvd info pro

                            Media Information                            
Region information                                    N/A not a DVD-VIDEO
Media code/Manufacturer ID                                    RITEK   D01
Media Product Revision Number                                         01h
Format Capacity                                                Blank Disc
Free Blocks                                                    4253024256
Free Capacity                                              7.96GB(8.55GB)
Book Type                                                         DVD-ROM
Media Type                                                       DVD+R DL
Data area starting sector                                          30000h
Layer 0 end sector                                                22D7FFh
Linear Density                                                0.293um/bit
Track Density                                                0.74um/track
Number of Layers                                                        2
Layer Track Path direction                      (OTP) Opposite track path

all seems ok i'll try what you sent give you feedback soon

EDIT: just tested the new thing comes up the same cant see the size of the disc, but i did notice i now have the option to carry on with the buring progress. btw could i use clone cd to burn it ?

This post has been edited by i_love_to_tsop: Oct 10 2006, 07:56 PM

[Redline99]

yeah you can use clonecd or imageburn