Print

[Klutsh]

QUOTE(Nightou @ Oct 10 2006, 09:10 PM)

I've retry it, and this is the wirte message that i got , whatever is with hacked.bin, or orig.bin.

Updating..... 00% www fail 1
www fail 2
www fail 3
www fail 4 ( the same thing up to 10) And it does it mabye 5 or 6 times, after it says flash write error

Do someone have an idea on this ?

ok, copy the original firmware to the root of the floppy disk.

QUOTE

boot from that with your drive connected to SATA port 1.
Type in "MTKFLASH W /SATA /M ORIG.BIN"
You should get a response from the system with a list of possible sata ports to flash to. (For arguments sake this is SATA 1 and SATA2 in this tutorial)
Turn off the power to the DVD drive wait a second and turn it back on again.
Now hit 1 on the keyboard to start the flash.
If it is waiting for more than a few seconds hit escape twice to stop the attempt and power off the drive again and keep trying the last part again.
It will work after a few attempts.