Topic: Smc For Jtag (Read 78 times)

defaultxex · « **on:** April 25, 2010, 03:20:00 PM »

Alrighty so im ready to move on to freeboot but theres one thing holding me back... in the tuts i have found they tell me to use either a smc from the Cygnos360 V2 SMC Collection.zip or extract one from my xbr image.. what one will work best? i dont have a cable as of yet so its all or nothing.

Sonic-NKT · « **Reply #1 on:** April 25, 2010, 05:04:00 PM »

i have updated my xenon with xbr3 to the latest freeboot with one of those cygnos SMCs, working fine with no problems

defaultxex · « **Reply #2 on:** April 25, 2010, 06:04:00 PM »

Gahh if it couldn't get worse I found a tut which uses a smc from a freeboot v0.30.rar
I guess it can't hurt to use the same one as you I guess lol.

defaultxex · « **Reply #3 on:** April 25, 2010, 07:44:00 PM »

Sorry for the double post but I used the one from my xbr3 image and it works great

soulwarrior · « **Reply #4 on:** April 25, 2010, 08:14:00 PM »

The SMC from an xbr image is the same as the smcs that come in the proper package at efnet.org --> channel #freeboot

farmboynick · « **Reply #5 on:** April 26, 2010, 12:38:00 AM »

i recomend you use the xbr smc as cygnos v2 smc can cause e79 and nand corruption

Icekiller2k6 · « **Reply #6 on:** April 26, 2010, 07:51:00 AM »

QUOTE(farmboynick @ Apr 26 2010, 08:38 AM)

i recomend you use the xbr smc as cygnos v2 smc can cause e79 and nand corruption

don't lie.
the cygnos SMC is to be used with.. CYGNOS! and the xbr with the diode/resistor method.

Author Topic: Smc For Jtag (Read 78 times)