So I'm assuming this would work for a virgin jtaggable box:
1. nandpro lpt: -r3 c1.bin
2. nandpro lpt: -r3 c2.bin
3. fc c1.bin c2.bin /b
3b. If no differences found move on, if differences found read do steps 1,2,3
4. flash xellous with nandpro lpt: -w2 xell-1f.bin
5. after flashing xellous, use the http address to get the nand dump
6. nandpro flashdmp.bin: -w3 c1.bin
7. nandpro flashdmp.bin: -r16 kv.bin 1 1
8. nandpro flashdmp.bin: -r16 rawconfig.bin 3de 2
9. using the xbr for your motherboard: nandpro xbr.bin: -w16 kv.bin 1 1
10. using the xbr for your motherboard: nandpro xbr.bin: -w16 rawconfig.bin 3de 2
11. Rename xbr.bin to updflash.bin and copy to the root of usb
12. start xellous with usb connected and let it flash
13. after xbr is flashed, shut down, and restart to make sure everything went okay
14. Now update xellous to xell-2f.bin by renaming that file to updslot0.bin and putting that in the root of your usb, start xellous and let it update xell.
Did I miss anything?
This post has been edited by soulwarrior: Jan 23 2010, 05:09 AM