xboxscene.org forums

Pages: 1 2 3 [4] 5 6

Author Topic: Free60 JTAG/SMC XeLL Hack for Jasper-256/512mb Motherboards  (Read 1246 times)

jhnblckwood

  • Archived User
  • Newbie
  • *
  • Posts: 5
Free60 JTAG/SMC XeLL Hack for Jasper-256/512mb Motherboards
« Reply #45 on: February 03, 2020, 03:28:00 PM »

chances are if you got the new liteon that cant be flashed, then you got a mobo that blocks the jtag...correct?

QUOTE(Hoescout @ Nov 16 2009, 08:32 PM) *

Yo guys, ive recently purchased the mw2 bundle, can u tell me if its got the exploitable kernel?
(IMG:http://img171.imageshack.us/img171/9669/mw2bundlekernel.th.jpg)


check the manufacturing date: and if that dont help you then your gonna have to try to dump and see...
as long as you dont have a new xbox than 7371 and below is fine..
Logged

DarkEvilKen

  • Archived User
  • Newbie
  • *
  • Posts: 38
Free60 JTAG/SMC XeLL Hack for Jasper-256/512mb Motherboards
« Reply #46 on: February 03, 2020, 04:21:00 PM »

What is the size of this NAND?

hynix
HY27US08281A

edit: With a bit of research, I found out it's the 16MB(128Mb) NAND chip. Correct me if I'm wrong.

This post has been edited by DarkEvilKen: Today, 12:27 AM
Logged

SDOD616

  • Archived User
  • Jr. Member
  • *
  • Posts: 58
Free60 JTAG/SMC XeLL Hack for Jasper-256/512mb Motherboards
« Reply #47 on: November 17, 2009, 05:50:00 AM »

Yes! It has finally happened!
Logged

frankstarr

  • Archived User
  • Newbie
  • *
  • Posts: 2
Free60 JTAG/SMC XeLL Hack for Jasper-256/512mb Motherboards
« Reply #48 on: November 17, 2009, 06:57:00 AM »

if i have updated as of earlier this month is there any chance i can use this with the Cygnos360?
http://www.se7ensins.com/forums/xbox-360-discussion/151508-one-step-closer-custom-kernel.html
i know this is for those who have not updated but this must mean it is possible for me to dump my nad as well.
i am willing to buy whatever it takes to dump.  any suggestions?
Logged

Hectic_One

  • Archived User
  • Newbie
  • *
  • Posts: 5
Free60 JTAG/SMC XeLL Hack for Jasper-256/512mb Motherboards
« Reply #49 on: November 17, 2009, 07:12:00 AM »

Can I flash a NAND dump from a devkit to a retail Jasper?
Logged

frankstarr

  • Archived User
  • Newbie
  • *
  • Posts: 2
Free60 JTAG/SMC XeLL Hack for Jasper-256/512mb Motherboards
« Reply #50 on: November 17, 2009, 07:42:00 AM »

i'm assuming you don't have the dev kit because you would know that the flash would require the same nad the dev kit has twice as much ram 1g as opposed to 512.  so i highly doubt that you would be able to flash it with a nad from a non dev kit.  

regardless could anyone imagine having a 360 dev kit and getting banned that would suck so bad
Logged

Hoescout

  • Archived User
  • Jr. Member
  • *
  • Posts: 68
Free60 JTAG/SMC XeLL Hack for Jasper-256/512mb Motherboards
« Reply #51 on: November 17, 2009, 07:52:00 AM »

QUOTE(Hoescout @ Nov 16 2009, 08:32 PM) View Post

Yo guys, ive recently purchased the mw2 bundle, can u tell me if its got the exploitable kernel?
IPB Image


Hello again, can anyone pls confirm if the Console from MW2 bundle is good for the JTAG hack as Im planning of getting another one?

Thx in advance
Logged

lenselijertje

  • Archived User
  • Jr. Member
  • *
  • Posts: 89
Free60 JTAG/SMC XeLL Hack for Jasper-256/512mb Motherboards
« Reply #52 on: November 17, 2009, 11:06:00 AM »

Your dashboard is good, but you need to know your CB value, and you only can see that when you dump the nand chip!
Logged

The Dude Z

  • Archived User
  • Full Member
  • *
  • Posts: 141
Free60 JTAG/SMC XeLL Hack for Jasper-256/512mb Motherboards
« Reply #53 on: November 18, 2009, 12:02:00 AM »

Anyone who may be looking for a 256mb Jasper that is Jtag hacked I may put one on Ebay for sale.
Ive had it sitting and waiting for this to happen with 2 of my Jaspers.
Being that I only need 1 if I can help a forum member out I may as well with the other.

If there is interest I'll list it on Ebay so your safe with the purchase just IM me.

Hopefully the more people we can get into this the better the chances some real good homebrew will trickle down like a good media center like XBMC was only with much more power this time.

Great stuff here guys they have them all capable now so long as you passed on the homebrew killer update
Logged

ddxcb

  • Archived User
  • Sr. Member
  • *
  • Posts: 330
Free60 JTAG/SMC XeLL Hack for Jasper-256/512mb Motherboards
« Reply #54 on: November 18, 2009, 09:17:00 AM »

QUOTE(frankstarr @ Nov 17 2009, 07:42 AM) View Post

i'm assuming you don't have the dev kit because you would know that the flash would require the same nad the dev kit has twice as much ram 1g as opposed to 512.  so i highly doubt that you would be able to flash it with a nad from a non dev kit.  

regardless could anyone imagine having a 360 dev kit and getting banned that would suck so bad


well your wrong about the ram only the xna devs have 1gb of ram + that guy cant run a dev nand bc of diffrent cpu key and the fuses.
Logged

The Dude Z

  • Archived User
  • Full Member
  • *
  • Posts: 141
Free60 JTAG/SMC XeLL Hack for Jasper-256/512mb Motherboards
« Reply #55 on: November 21, 2009, 01:27:00 PM »

I would likj to know if anyone knows if by flashing xell to the jasper and then running xell to get the cpu key would cause the system to raise a flag for possible banning.

Maybe someone who went to xell and then back to standard dashboard could check by using the Xval tool on the front page of X-S  ?
Logged

niai

  • Archived User
  • Sr. Member
  • *
  • Posts: 331
Free60 JTAG/SMC XeLL Hack for Jasper-256/512mb Motherboards
« Reply #56 on: November 22, 2009, 03:46:00 AM »

if you dont have it hooked up to the net and flash back the same nand dump as you made of the console then there wouldnt be any way for them to think any think but it been off all that time

but with every thing there a risk there may be some thing we dont know bout or you may make a bad dump ext
Logged

The Dude Z

  • Archived User
  • Full Member
  • *
  • Posts: 141
Free60 JTAG/SMC XeLL Hack for Jasper-256/512mb Motherboards
« Reply #57 on: November 22, 2009, 10:24:00 PM »

QUOTE(niai @ Nov 22 2009, 05:46 AM) *

if you dont have it hooked up to the net and flash back the same nand dump as you made of the console then there wouldnt be any way for them to think any think but it been off all that time

but with every thing there a risk there may be some thing we dont know bout or you may make a bad dump ext


I was thinking more along the lines of blowing E-fuses by writing to the Nand.
Now I am curios if this app could be used to obtain the cpu key and 1bl key on a jasper 256mb arcade and then would there be a way to use those keys to change the video region of the console ?
Logged

Chemodile

  • Archived User
  • Newbie
  • *
  • Posts: 23
Free60 JTAG/SMC XeLL Hack for Jasper-256/512mb Motherboards
« Reply #58 on: December 03, 2009, 06:46:00 AM »

If you end up needing the switching diode, does it *have* to be placed on the motherboard, or can it be placed inside the db25 hood? I've never used a switching diode before. Will it's physical location on the circuit actually make a difference so long as the polarity's correct?
Logged

modslave

  • Archived User
  • Sr. Member
  • *
  • Posts: 258
Free60 JTAG/SMC XeLL Hack for Jasper-256/512mb Motherboards
« Reply #59 on: December 03, 2009, 12:45:00 PM »

QUOTE(Chemodile @ Dec 3 2009, 01:46 PM) View Post

If you end up needing the switching diode, does it *have* to be placed on the motherboard, or can it be placed inside the db25 hood? I've never used a switching diode before. Will it's physical location on the circuit actually make a difference so long as the polarity's correct?


Everything I've read (alot) stated the diode MUST be soldered directly to the board, not in the plug
Logged
Pages: 1 2 3 [4] 5 6