Topic: Restore Hdd Installs With Nand Numps? (Read 561 times)

majinsoftware · « **Reply #45 on:** November 10, 2009, 07:23:00 PM »

nope, Its just needed to boot xell, Which only works on dash versions below 8XXXX.

DarkEvilKen · « **Reply #46 on:** November 10, 2009, 11:05:00 PM »

Would appreciate if anyone could answer my questions.

1. Can the Jasper Nand be read/written?
2. Would it still be possible if I have the latest update?
3. Would I need any special devices/tools.

I have followed with this thread:
http://forums.xbox-scene.com/index.php?showtopic=690493

but there is no mention of the Jasper motherboard. I assume it would be similar for the Jasper.
Could any one provide me answers?

majinsoftware · « **Reply #47 on:** November 10, 2009, 11:14:00 PM »

QUOTE(DarkEvilKen @ Nov 11 2009, 08:05 AM)

Would appreciate if anyone could answer my questions.

1. Can the Jasper Nand be read/written?
2. Would it still be possible if I have the latest update?
3. Would I need any special devices/tools.

I have followed with this thread:
http://forums.xbox-s...howtopic=690493

but there is no mention of the Jasper motherboard. I assume it would be similar for the Jasper.
Could any one provide me answers?

1: yes
2: its been covered 6 times now, Yes
3: no (just soldering iron, solder, wires, printer port.)

PhoneyVirus · « **Reply #48 on:** November 11, 2009, 12:02:00 AM »

QUOTE(majinsoftware @ Nov 9 2009, 12:56 AM)

Its called Cygnos360 V2.0.
But doesnt do much with out knowing your CPUKEY which can only be gotten with a old dash thats exploitable.

Thanks for the info my DB 2.0.8507 so with it been this I can't do any Backup or Restore got no CPUKEY. I'm just going to update to the last DB update and say the hell with it after I get my DVDKey off the drive.

majinsoftware · « **Reply #49 on:** November 11, 2009, 12:06:00 AM »

Yes you can backup and restore the nand with that version. Any dash version will work.
Just you cannt run xell once your at or above 8XXXX so you cant get the cpukey to modify and decrypt the nand image you backed up.

But its still useful to keep a backup so if you get banned you can restore and the xbox wont know its been banned so all the features still work.

Just you will have to make a new backup each time you have a update that blows a fuse.

joeyddr · « **Reply #50 on:** November 11, 2009, 06:43:00 AM »

so how did someone say they changed keyvaults?

majinsoftware · « **Reply #51 on:** November 11, 2009, 07:16:00 AM »

Because they knew there cpukey so they could rebuild there nand with another xboxs data.

joeyddr · « **Reply #52 on:** November 11, 2009, 07:41:00 AM »

QUOTE(majinsoftware @ Nov 11 2009, 09:16 AM)

Because they knew there cpukey so they could rebuild there nand with another xboxs data.

so if i get the cpukey from the unbanned xbox... it still running 1888 btw i can use that for the banned one? or do i need the cpukey from both?

majinsoftware · « **Reply #53 on:** November 11, 2009, 06:00:00 PM »

for both.

atikosh · « **Reply #54 on:** November 11, 2009, 06:56:00 PM »

QUOTE(majinsoftware @ Nov 12 2009, 03:00 AM)

for both.

What happen if I exchange both the CPU and the nand of the banned and not banned mainboards.

This post has been edited by atikosh: Nov 12 2009, 02:57 AM

majinsoftware · « **Reply #55 on:** November 11, 2009, 07:58:00 PM »

Go ahead and try, Its not exactly easy to solder on a new cpu.
If your solderings up to skill it will work but you will also need to swap the dvd drives.

oh and the dash will need to be the same version other wise it wont boot because the burnt fuses.

This post has been edited by majinsoftware: Nov 12 2009, 03:58 AM

foolkiller · « **Reply #56 on:** November 12, 2009, 12:56:00 AM »

QUOTE(majinsoftware @ Nov 10 2009, 09:23 PM)

nope, Its just needed to boot xell, Which only works on dash versions below 8XXXX.

Thank you for confirming that. So JTAG is only needed to run Xell and the LPT portion is the only thing needed to read and write to NAND. I have read tons of tutorials and none of them mention this. I guess in the past you really needed to do both, I mean what other good reason would you have to read and write your NAND if not for running Xell. But now with the recent bans and HDD crippling, it is a very good safety net to have a NAND backup. Thanks again for the confirmation.

majinsoftware · « **Reply #57 on:** November 12, 2009, 01:07:00 AM »

Correct, No ones ever need to keep a backup in the past. All my xboxs now have a LPT wired to them so I can update the backup if I get a new dash update.

atikosh · « **Reply #58 on:** November 12, 2009, 12:55:00 PM »

QUOTE(majinsoftware @ Nov 12 2009, 04:58 AM)

oh and the dash will need to be the same version other wise it wont boot because the burnt fuses.

Thank you for the hint. I' ll try and inform about it.

woo456 · « **Reply #59 on:** November 12, 2009, 02:10:00 PM »

If I'd get the NAND backup done, would I need to desolder everything then, too or I could leave it alla soldered for the next time?

Author Topic: Restore Hdd Installs With Nand Numps? (Read 561 times)