xboxscene.org forums

Author Topic: Swapping Old Flashed Drive Into New 360  (Read 33 times)

tinker78

  • Archived User
  • Newbie
  • *
  • Posts: 8
Swapping Old Flashed Drive Into New 360
« on: December 18, 2008, 05:22:00 PM »
try switching out the main boards from the drives and see if that works. the drive key is stored in the board not the whole drive so it should work.

remove the 4 screws from the drive and then carefully remove the circuit board from the rear bottom. then switch them out. should do the trick.
Logged