xboxscene.org forums

Author Topic: Via Vt6421a Driver Problem (code 10). Cannot Flash Hitachi V59 Drive.  (Read 61 times)

drega78

  • Archived User
  • Newbie
  • *
  • Posts: 1
Via Vt6421a Driver Problem (code 10). Cannot Flash Hitachi V59 Drive.
« on: July 11, 2007, 02:52:00 PM »
I have a via VT6421A pci card where I'm trying to flash my second 360 (hitachi v59, first was a 79 and went well). I get it to modeB with the wire trick (all symptoms of modeB is there) and when windows finishes loading, it cannot detect the drive. Also, I checked device manager and it gave me the error "This device cannot be started (code10)". I then tried updating the driver to vraid driver 550b but still, same error.

Do you have any idea what I can do to get this drive detected or for it NOT to have that code 10 junk? Thank you so much for you help.
Logged

topo80

  • Archived User
  • Newbie
  • *
  • Posts: 19
Via Vt6421a Driver Problem (code 10). Cannot Flash Hitachi V59 Drive.
« Reply #1 on: July 12, 2007, 12:23:00 PM »
try using Slax 2.1 to get into mode b.
it's so much easier.

if it doesnt work, then i dont know ^^

This post has been edited by topo80: Jul 12 2007, 07:24 PM
Logged

iRebound

  • Archived User
  • Newbie
  • *
  • Posts: 12
Via Vt6421a Driver Problem (code 10). Cannot Flash Hitachi V59 Drive.
« Reply #2 on: August 29, 2008, 01:53:00 AM »
QUOTE(drega78 @ Jul 11 2007, 04:28 PM) View Post

I have a via VT6421A pci card where I'm trying to flash my second 360 (hitachi v59, first was a 79 and went well). I get it to modeB with the wire trick (all symptoms of modeB is there) and when windows finishes loading, it cannot detect the drive. Also, I checked device manager and it gave me the error "This device cannot be started (code10)". I then tried updating the driver to vraid driver 550b but still, same error.

Do you have any idea what I can do to get this drive detected or for it NOT to have that code 10 junk? Thank you so much for you help.


I have the same problem.

I got my hitachi 59 drive into modeB using the wire trick. The Device status on my vt6421a card says: This device cannot start. (Code 10). I also tried using different version drivers with no luck.

I'm running on XP using an old Dell Dimension 2400. Can it be that this computer is too old?
Logged

iRebound

  • Archived User
  • Newbie
  • *
  • Posts: 12
Via Vt6421a Driver Problem (code 10). Cannot Flash Hitachi V59 Drive.
« Reply #3 on: August 31, 2008, 01:55:00 PM »
any advice?
Logged

Martinchris23

  • Archived User
  • Hero Member
  • *
  • Posts: 2004
Via Vt6421a Driver Problem (code 10). Cannot Flash Hitachi V59 Drive.
« Reply #4 on: August 31, 2008, 02:26:00 PM »
Before I changed my motherboard, I had exactly the same thing. My VIA 6421 card was only good for Samsungs. I had to use the onboard NForce 4 SATA chipset for everything else..

...so, if you've got an NForce chipset, try running the drive from this instead.
Logged

iRebound

  • Archived User
  • Newbie
  • *
  • Posts: 12
Via Vt6421a Driver Problem (code 10). Cannot Flash Hitachi V59 Drive.
« Reply #5 on: September 01, 2008, 12:50:00 AM »
QUOTE(Martinchris23 @ Aug 31 2008, 04:02 PM) View Post

Before I changed my motherboard, I had exactly the same thing. My VIA 6421 card was only good for Samsungs. I had to use the onboard NForce 4 SATA chipset for everything else..

...so, if you've got an NForce chipset, try running the drive from this instead.



Thanks. I ordered another card. If that still don't work then I'll try on a friend's computer.
Logged