Topic: Compatible Motherboard/pci Card (Read 532 times)

sosotiit · « **Reply #30 on:** May 27, 2007, 09:08:00 AM »

via8237, should be OK

-soso

thepita · « **Reply #31 on:** June 22, 2007, 06:24:00 PM »

My friend wants his drive flashed back to its original state so Im going to figure out how to use my laptop and a buslink sata pcmcia card. ill post the steps when I get it to work!.

fits79 · « **Reply #32 on:** June 24, 2007, 05:01:00 PM »

Where i can find if my onboard sata controller(motherboard: giabyte 8ik-1100) revision 1 is compatible with xbox360 dvdrom drives??? And where i can download guide and programms i need to flash my samsung xbox360 dvdrom drive. A lot of thangs.

Bassie Von Adriaan · « **Reply #33 on:** July 09, 2007, 03:56:00 PM »

Hi, im looking for a compatible ms28 and hitachi 78, 79(maybe in future?) compatible card?

Is this a good one?

http://www.newegg.co...N82E16815124022

I have ich5 chipset and got not the same letters I usually get when trying to go in mode b with other hitachi's, so I dunno

lilpaki · « **Reply #34 on:** July 28, 2007, 02:24:00 PM »

hi all, i have a ms25 and was wondering if it can beflshed with a a8n sli deluxe mobo. thanks

Jimmied · « **Reply #35 on:** November 17, 2007, 12:29:00 PM »

Hi, I have a benq drive in my 360 and an on board sata drive which is a Silicon Image Sil 3112 Sata Raid Controller.

Now I have ordered the sata controller that is ment to work with every drive but it hasn't arrived yet, So as I have the day of work tommorow I wanted to see weather I could mod my 360 using my on board sata controller instead.

SO please any info would be great, I'm sure I read somewhere that benq can be used with onboard sata controllers.

Jimmie

milamber · « **Reply #36 on:** November 17, 2007, 03:28:00 PM »

From DosFlash v1.3 Beta:

"As of right now, only nforce and VIA chipsets are supported in 100% software read/write of the BenQ drive with DosFlash(info). Success varies dependent upon which motherboard you have (intel (ICH) seems to be problematic combined with VIA)"

I hate to burst your bubble but I'm afraid you'll have to wait for the VIA card.

Jimmied · « **Reply #37 on:** November 18, 2007, 12:32:00 AM »

QUOTE(milamber @ Nov 17 2007, 11:04 PM)

From DosFlash v1.3 Beta:

"As of right now, only nforce and VIA chipsets are supported in 100% software read/write of the BenQ drive with DosFlash(info). Success varies dependent upon which motherboard you have (intel (ICH) seems to be problematic combined with VIA)"

I hate to burst your bubble but I'm afraid you'll have to wait for the VIA card.

Thanks, I thought I wouldnt be able to, but ah well I'll just mess around with opening up the 360 for practice and sort the usb drive ready, I just hope it turns up monday, I ordered it last sunday! Gah!

Jimmie

Keelz · « **Reply #38 on:** November 18, 2007, 03:49:00 PM »

anyone plz?

LORDRAHAB · « **Reply #39 on:** January 16, 2008, 08:11:00 PM »

HI IM USING A P4VM800 ASROCK MOTHER BOARD

IM DOING ENERITING AS A GUIDE FOR THE BENQ VAD6038 DRIVE SAYS MY IPREP GETS ALL FINE BUT

IM HAVING PROBLEMS WHEN I TRY TO READ THE ORIGINAL FIRMWARE AND REPLACEIT WITH THE MULTISPEED HACKED; IT HANGS N DOES NOTHING MORE, MY DRIVE IS RIGTH IN THE REQUIRED STATUS
BUT CANT READ

EVEN BAD OR ERROR MESSAGES ARENT DISPLAYED JUST HANGS FOR A LONG LONG TIME

North Bridge:
VIA P4M800 CE, FSB @ 800/533/400 MHz,
with Intel® Hyper-Threading Technology ready

South Bridge:
VIA VT8237R, supports USB 2.0, ATA 133, SATA 1.5Gb/s

ILL TRY TO USE THE NEW RELEASE I HOPE THIS WORKS NOW BUT ANY HELP WILL BE COLL

TNX MY ENGLISH IS BAD SORRY!!!!

tornadog · « **Reply #40 on:** January 24, 2008, 11:20:00 AM »

I have done samsung ms25 with this configuration and a modified mktflash, but will it work for a Hitachi 0078

X360 Drive Brand and Model: Hitachi V78
Motherboard/PCIcard Model: MSI Neo4f
Chipset on Motherboard/PCIcard Model:Nforce4
Slax version:2.1

exarkahn76 · « **Reply #41 on:** April 19, 2008, 08:35:00 AM »

So Far I have flashed 4x ms25's and aHitachi 46 and 47. as well as a WD Bevs laptop drive, all off the onboard sata of my Gigabyte GA-8I945GZME-RH. I have it installed in a Micro ATX case which makes travel w/ it easy when people dont want to give up a system for repair. I Have a Syba Via card just incase I get some ms28's

madbloke · « **Reply #42 on:** April 20, 2008, 09:26:00 AM »

I don't think my motherboard has any slots to connect a sata cable could this work?

http://www.ebuyer.com/product/136400#

Martinchris23 · « **Reply #43 on:** April 20, 2008, 12:18:00 PM »

QUOTE(madbloke @ Apr 20 2008, 05:02 PM)

I don't think my motherboard has any slots to connect a sata cable could this work?

http://www.ebuyer.com/product/136400#

This is only for extending an existing SATA port to the front of your PC, but you would need an internal SATA port to connect it to.

madbloke · « **Reply #44 on:** April 22, 2008, 12:24:00 PM »

I'm thinking that this would work?

http://cgi.ebay.co.u...bayphotohosting

Author Topic: Compatible Motherboard/pci Card (Read 532 times)