Topic: Pictures of 'Xecuter DemoN' prototypes (Read 85 times)

Xbox-Scene · « **on:** March 20, 2012, 07:52:00 PM »

Pictures of 'Xecuter DemoN' prototypes
Posted by XanTium | March 20 21:52 EST | News Category: Xbox360

Quote

Team-Xecuter has been kind enough to shared with us some cool exclusive pictures of their 'Xecuter DemoN' product from the lastest revision that been shipped recently to a bunch of key developers to play with and expand the amount of features for it belong what has already been announced so far. -- Enjoy!
Remember these pictures are of the 'prototype', the final design is subject to change as feedback is received from developers using this design and Team-Xecuter improves the overall quality as they are known for their perfection in rock'ing the Xbox Scene.

Official Site: http://team-xecuter.com
News-Source/More Pics: ps3crunch.net

hellslave · « **Reply #1 on:** March 20, 2012, 09:57:00 PM »

Total newb here... I get that the bigger board solders onto the 360 mobo, but where does that small piece go?

garyopa · « **Reply #2 on:** March 21, 2012, 07:26:00 AM »

QUOTE(hellslave @ Mar 20 2012, 11:57 PM)

Total newb here... I get that the bigger board solders onto the 360 mobo, but where does that small piece go?

The small board, gets put outside your X360 case in some nice handy corner spot, so you can easier control the operation by the set of switches and see its LED status and more important update from your PC via the mini-usb jack.

This makes it very easy to reflash and update the core firmware without any soldering again or opening your X360 case up every time there is an needed update.

hellslave · « **Reply #3 on:** March 21, 2012, 03:12:00 PM »

Sounds like there is a lot of risk of it getting ripped out then. Still though, looks really interesting. If only I could solder...

Gazc0igne · « **Reply #4 on:** March 21, 2012, 04:15:00 PM »

getting what ripped out?

worst case scenario is you yank off the small daughterboard and damage the ribbon cable which is easily replaced

it would never rip the demon off the motherboard lol

hellslave · « **Reply #5 on:** March 21, 2012, 06:43:00 PM »

I know the demon would be secure. I just thought the ribbon cable could be easily damaged, and I didnt know they were so easily replaceable.

UberDeev · « **Reply #6 on:** March 23, 2012, 09:40:00 PM »

Well you wouldn't just have the daughterboard loose outside the 360, you'd have it securely mounted on there somehow.

mafiafan123 · « **Reply #7 on:** March 29, 2012, 01:35:00 AM »

Im sure it will be as simple as solder chip in place and a drop of hot glue on the ribbon cable and the daughter board im sure you could come up with your own spot, I would just say under the hard drive. the chips are starting to remind me of the original xbox I had to wait for Xecuter to come out with a chip back then I was to scared to do enigma too many wires!

This post has been edited by mafiafan123: Mar 29 2012, 08:36 AM

Author Topic: Pictures of 'Xecuter DemoN' prototypes (Read 85 times)