Topic: 0110 Fixed But Not Sure If Was Memmory Or Gpu Was The Problem (Read 78 times)

wellmodded · « **on:** June 28, 2007, 02:42:00 PM »

Hey i just wonderin in the FAQ i read that 0110 is memmory error so i put some washer on the memory modules under the board so that whn the board lays back in the case the case the memmory will be presses aguest the motherboard i also put some washer under the gpu heatsink so whn the heatsink is bolt back down to the metal case it press on those memory modules

wel after alot fidling with bolts and going between 0110 and 0102 i got the motherboard to boot but i read ina post
http://forums.xbox-scene.com/index.php?act...33&t=609134
that the guy said 0110 is due to the gpu and the error code faq says it due to memory
can any tell me by there exprience if memory or gpu??

casue putting the washer under the board i prying the board up which also can make bga connection which where not conntect to the gpu connect back so is 0110 gpu or memmory

RDC · « **Reply #1 on:** June 28, 2007, 02:57:00 PM »

You may as well ask how many marbles would fill the Grand Canyon. Any time you put stress on one part of the board and bend it, you bend the thing everywhere. It's a safe bet it was the GPU, RAM or CPU, but knowing exactly what BGA joint was causing it is next to impossible to tell.

Say you think it's one of the GPU solder joints, well that trace has to run somewhere and if it were to run to the RAM, Southbridge, CPU or any other number of components then it could just as easily be one of those joints that caused the problem instead and flexing the board in one place just bent it there as well. There's no 100% way to tell if it's one part or the other save that everything that connects to the board with BGA a connection is highly suspect.

chynk · « **Reply #2 on:** June 28, 2007, 04:44:00 PM »

I'm sorry if I didn't catch this... but did you say you fixed the 0110 error? I know thats what it says in the title but it doesn't seem like it after I read your post.

wellmodded · « **Reply #3 on:** June 28, 2007, 09:20:00 PM »

Yea i was getting 0110 error and i was going for 0110 to 0102 of and on casue i was trying diffrent pressure points on the bolt so therefore the board would ben diffrently so whn i bend th board proberly the gpu connection raised up and gave me 0102

but any waz i got it work so tht is good how long it last is another question??

brandogg · « **Reply #4 on:** June 28, 2007, 10:57:00 PM »

It's going to last until it stops working - there is no certain timeline for this, especically when you can't pinpoint exactly how or what you fixed.

wellmodded · « **Reply #5 on:** June 29, 2007, 12:25:00 AM »

QUOTE(brandogg @ Jun 29 2007, 01:27 AM)

It's going to last until it stops working - there is no certain timeline for this, especically when you can't pinpoint exactly how or what you fixed.

LOL dude that was a retorical question ( i.e. i already now the answer to the question i asked lol

Author Topic: 0110 Fixed But Not Sure If Was Memmory Or Gpu Was The Problem (Read 78 times)