Print

[daniel_8775]

I recently did the "hot air gun fix" on my friends 360 in order to fix the 0102 error. The video on YouTube (by Modfreakz) said to let it cool for about 25-30 minutes, and we did so. However, we're still getting the overheating error (2 red lights). It's been about 5 days, and he's still getting these red lights... it just doesn't make any sense to me, because there's no way it could still be overheating.  (IMG:style_emoticons/default/dry.gif) What happens is... when we turn it on, the fan starts going really fast, then stops. Could this be a damaged fan problem? Or is it only speeding up because it thinks the console is overheating?

Any help would be appreciated!

Thanks

Dan

[dj_adamix]

u probably heated it up too much or moved something and soldering points under the gpu connected to each other. that gives the overheating error on bootin. well try hot gun again. if it wont do it. u need new mobo bro

[HDTVDinner]

QUOTE(dj_adamix @ Dec 19 2006, 04:41 AM)

u probably heated it up too much or moved something and soldering points under the gpu connected to each other. that gives the overheating error on bootin. well try hot gun again. if it wont do it. u need new mobo bro

Double check the 8 black screws, If these arent tight, you get two red lights.

[dj_adamix]

well console should boot up even without those 8 black screews. check if the X part is tighten to the heat sinks. good luck.

[HDTVDinner]

QUOTE(dj_adamix @ Dec 19 2006, 03:23 PM)

well console should boot up even without those 8 black screews. check if the X part is tighten to the heat sinks. good luck.

Odd, Mine didnt, once I properly tightened them, it ran like a dream for all of 3 hours.

[daniel_8775]

Thanks for all of the replys! I'll try all of these suggestions

Dan

[dj_adamix]

let us know if it works (IMG:style_emoticons/default/smile.gif) thx bro