Topic: Dvd Drive Not Ejecting (Read 57 times)

Boinger · « **on:** July 28, 2006, 02:17:00 PM »

The power just flashes green and its a brand new xbox

Note: i did do the psu to replace my power brick

any help would be appreciated

Thank you

robivy64 · « **Reply #1 on:** July 28, 2006, 02:49:00 PM »

QUOTE

Note: i did do the psu to replace my power brick

I had a weird mental image reading this... uugghh

-R

This post has been edited by robivy64: Jul 28 2006, 09:50 PM

Boinger · « **Reply #2 on:** July 28, 2006, 03:02:00 PM »

woops i meant to say psu mod

G0t M4xx 21 · « **Reply #3 on:** July 28, 2006, 03:31:00 PM »

QUOTE(robivy64 @ Jul 28 2006, 03:20 PM)

I had a weird mental image reading this... uugghh

-R

y'all are sick...

Check that your modded psu is outputting the correct voltage (if your 360 boots up it should be), then the porblem is probably with the dvd drive itself.

Boinger · « **Reply #4 on:** July 28, 2006, 05:26:00 PM »

ya it is booting so my drive is dead ? neway i can repair it myself?

Boinger · « **Reply #5 on:** July 28, 2006, 06:31:00 PM »

could it be a possible that its not enough wattage ?

after a while the console restarts

or is it the amp problem ?

DaShiZNiT · « **Reply #6 on:** July 29, 2006, 12:26:00 PM »

I know this might sound silly, but one of my 360's trays gets stuck by the facplate(?) and sometimes I have to finaggle it when ejecting... Maybe something is catching?

shoeverine · « **Reply #7 on:** July 29, 2006, 02:48:00 PM »

i would greatly appreciate anyone's help. my 360 has a samsung drive inside that will not eject. it behaves similar to how a samsung on a regular xbox would be when it wouldnt eject. my warranty is already voided, so can anyone give me a few pointers. u press the eject button and it seems like its stuck. any idead on whether it could be the magnet or anything?

Boinger · « **Reply #8 on:** July 29, 2006, 09:56:00 PM »

its not catching on anything i can eject it manually with a pin...

when i push eject the button just flashes green any ideas?

yamum9863 · « **Reply #9 on:** July 29, 2006, 10:06:00 PM »

Sounds like the logic board in the drive is dead. Like mine.
Is there anyone you can buy the sammy drives or just the logic boards off?

taikwondoejoe · « **Reply #10 on:** July 30, 2006, 02:40:00 AM »

Use the 360 PSU and see if it works. Does the 360 still work? You could probably fix it by doing a sweet ass drive like the playstation 1.

Knocker_Nutz · « **Reply #11 on:** July 30, 2006, 12:53:00 PM »

Are you sure you plugged in the SATA cable? I didn't have my SATA cable plugged in and the eject button wouldn't work.

Author Topic: Dvd Drive Not Ejecting (Read 57 times)