xboxscene.org forums

Author Topic: Cant See Dirs  (Read 95 times)

jacks

  • Archived User
  • Newbie
  • *
  • Posts: 46
Cant See Dirs
« on: May 09, 2004, 07:30:00 AM »

I have just copied over newest build, I am using Relax v0.60, evrything works in xbmp

but when I load up new build of xbmc i go to XNS (I have changed config) it bring me initial dirs (Music and Movies setup in Relax) but when I go in These dirs I dont see anything.

I go into Log on Relax and I see the Following:

192.168.1.2     5 Cannot open file "c:\Movies$$DISPNAME$$\Movies\folder.tbn". The system cannot find the path specified
192.168.1.2     5 Cannot open file "c:\Movies$$DISPNAME$$\Movies\folder.jpg". The system cannot find the path specified
192.168.1.2     5 Cannot open file "c:\Music$$DISPNAME$$\Music\folder.tbn". The system cannot find the path specified
192.168.1.2     5 Cannot open file "c:\Music$$DISPNAME$$\Music\folder.jpg". The system cannot find the path specified


in config file I have this under music and Movies

     <name>XNS</name>
     <path>xns://192.168.1.1:1400/</path>

please help

cheers

Jacks
 <
Logged

JayDee

  • Archived User
  • Hero Member
  • *
  • Posts: 2311
Cant See Dirs
« Reply #1 on: May 09, 2004, 07:38:00 AM »

I must say:

Move on to Samba (smb) or ccx (xbmsp)

XNS (relax) is to buggy and old that it is more worth to move on....  <
Logged

jacks

  • Archived User
  • Newbie
  • *
  • Posts: 46
Cant See Dirs
« Reply #2 on: May 09, 2004, 07:46:00 AM »

cheers for the advice mate but I need to know answer for above, it worked fine with earlier build?

CHeers

Jacks

when installing a new build do I just delete Old folfer and replce with new or is there somewhere elese that needs deleting aswel

Jacks


This post has been edited by jacks: May 9 2004, 07:15 PM <
Logged

jacks

  • Archived User
  • Newbie
  • *
  • Posts: 46
Cant See Dirs
« Reply #3 on: May 09, 2004, 12:17:00 PM »

when installing a new build do I just delete Old folfer and replce with new or is there somewhere elese that needs deleting aswel

Jacks
 <
Logged

drivinell

  • Archived User
  • Newbie
  • *
  • Posts: 6
Cant See Dirs
« Reply #4 on: May 09, 2004, 03:14:00 PM »

QUOTE
when installing a new build do I just delete Old folfer and replce with new or is there somewhere elese that needs deleting aswel


from xboxmediacenter.com:
When up or down-grading XBMC version/build level you need to delete the "Xbox Media Center" save under memory in the original Xbox™ dashboard and reboot, this will restore XBMC to it’s default settings which is needed each time changing the build version. Alternativly delete both “0face008” folders under E:\UDATA & E:\TDATA on your Xbox (including the system.bin file in one of these folders).

QUOTE
cheers for the advice mate but I need to know answer for above, it worked fine with earlier build?


XNS support was great for XBMP but has been very shakey for XBMC.  I've had limited success (and multiple problems) with some of the earlier builds but overall it's clear that XBMC is being tailored for more stable streaming protocols. As JayDee said,  try SMB or XBMS. (IMHO ccxgui is not only more reliable but much easier to set up-- just drag and drop the directories you wish to share. Plus you can count on it to still work with later builds  :)  )

Hope this helps.
 <
Logged

jacks

  • Archived User
  • Newbie
  • *
  • Posts: 46
Cant See Dirs
« Reply #5 on: May 09, 2004, 10:56:00 PM »

"When up or down-grading XBMC version/build level you need to delete the "Xbox Media Center" save under memory in the original Xbox™ dashboard and reboot, this will restore XBMC to it’s default settings which is needed each time changing the build version. Alternativly delete both “0face008” folders under E:\UDATA & E:\TDATA on your Xbox (including the system.bin file in one of these folders).:

ok I can delete the stuff off E:\ no probs buit where is the save u talk about in 1st bit above.

Will this fix my initial problem, what I did find is that the only version that will work for me at mo is build I orginall had on xbox.

Jacks
 <
Logged

akarnid

  • Archived User
  • Full Member
  • *
  • Posts: 228
Cant See Dirs
« Reply #6 on: May 10, 2004, 01:55:00 AM »

Jacks:

You boot up your MS dash and go to savegames and delete the save called Xbox Media Center.  <
Logged

jacks

  • Archived User
  • Newbie
  • *
  • Posts: 46
Cant See Dirs
« Reply #7 on: May 18, 2004, 06:43:00 AM »

Shit I am still having same problem, prob goes when I put old version back, is this right syntax in newer version of xbmc for relax shares?

<name>XNS</name>
<path>xns://192.168.1.1:1400/</path>

Jacks

it takes me into main Virtual Dirs defined in Relax i.e Music and movies but it dont show anythign else inside, when I  check debug in Relax I see these errors

192.168.1.2     5 Cannot open file "c:\Movies$$DISPNAME$$\Movies\folder.tbn". The system cannot find the path specified
192.168.1.2     5 Cannot open file "c:\Movies$$DISPNAME$$\Movies\folder.jpg". The system cannot find the path specified
192.168.1.2     5 Cannot open file "c:\Music$$DISPNAME$$\Music\folder.tbn". The system cannot find the path specified
192.168.1.2     5 Cannot open file "c:\Music$$DISPNAME$$\Music\folder.jpg". The system cannot find the path specified
192.168.1.2     5 Cannot open file "c:\Movies$$DISPNAME$$\Movies\folder.jpg". The system cannot find the path specified
192.168.1.2     5 Cannot open file "c:\Music$$DISPNAME$$\Music\folder.jpg". The system cannot find the path specified
192.168.1.2     5 Cannot open file "c:\Movies$$DISPNAME$$\Movies\folder.tbn". The system cannot find the path specified
192.168.1.2     5 Cannot open file "c:\Movies$$DISPNAME$$\Movies\folder.jpg". The system cannot find the path specified
192.168.1.2     5 Cannot open file "c:\Music$$DISPNAME$$\Music\folder.tbn". The system cannot find the path specified
192.168.1.2     5 Cannot open file "c:\Music$$DISPNAME$$\Music\folder.jpg". The system cannot find the path specified
 <
Logged

tslayer

  • Archived User
  • Sr. Member
  • *
  • Posts: 499
Cant See Dirs
« Reply #8 on: May 18, 2004, 07:15:00 AM »

Relax does not work with later versions of XBMC.

Relax(XNS) is slowly being phased out.  Please move to to either SMB or CCX.

TS
 <
Logged