Topic: Toshiba Samsung Ts-h943-ms28 Not Seen By Xbox_backup_creator_v2.8 (Read 86 times)

xbfan703 · « **on:** March 04, 2009, 08:56:00 AM »

I recently had to replace the Hitachi-GDR3120L-0046 DVD drive in my Xbox360. I replaced the drive with a Toshiba Samsung TS-H943-MS28 re-flashed with Ixtreme_1.5 spoofed as a Hitachi-GDR3120L-0046. My set-up was using a Windows XP desk top computer, Xecuter 360 Connectivity Kit (CK3) and a Syba SY-VIA6421-3S1P from Newegg.

http://www.newegg.com/Product/Product.aspx...N82E16816124011

All went well with the re-flash process, but I am unable to get Xbox_Backup_Creator_v2.8 to see my Toshiba Samsung TS-H943-MS28. I have done much research to try to determine the problem and have found two possible reasons:

(1) I read somewhere that a VIA6421 RAID card will work for re-flashing but is no good for making Backups and that a NONRAD VIA6421 card is required for backups.

(2) The other possiblility might be that Xbox_Backup_Creator_v2.8 does not see the drive because the Toshiba Samsung TS-H943-MS28 drive firmware is spoofed as Hitachi-GDR3120L-0046.

I found this posting on another xbox360 forum:

[Trouble extracting games using schtrom360Xtract and backup creator]

The xtreme firmware that I had on the MS28 was also spoofed to make the xbox think it was my original LiteOn (otherwise it doesn't work), but because of this the computer couldn't read the drive. So the solution was to flash some original (not spoofed) xtreme firmware onto the Samsung MS28 and now the computer detects it fine and everything is working.

Can someone confirm which is the problem ? Or if both/neither are the problems ? Any
responses will be appreciated.

This post has been edited by xbfan703: Mar 4 2009, 04:59 PM

xbfan703 · « **Reply #1 on:** March 04, 2009, 10:20:00 AM »

Does a TS-H943A need to be flashed with Xtreme800.bin to dump xbox360 games for backup?

chorizo1 · « **Reply #2 on:** March 04, 2009, 01:33:00 PM »

QUOTE(xbfan703 @ Mar 4 2009, 11:56 AM)

Does a TS-H943A need to be flashed with Xtreme800.bin to dump xbox360 games for backup?

yes.

xbfan703 · « **Reply #3 on:** March 04, 2009, 01:03:00 PM »

Thank you for the reply. I have obtained xtreme800.bin and opened in using Firmware Toolbox which identifies it as: Toshiba Samsung TS-H943-MS25. Is this correct for use with a Toshiba Samsung TS-H943-MS28 drive?

xbfan703 · « **Reply #4 on:** March 04, 2009, 01:58:00 PM »

I have spoofed the xtreme800.bin ms25 as ms28. Is that the correct the thing to do? Any replies will be helpful, I have been reading the forums all day and googling to try to get this right. A reply from anyone who backups their games will be appreciated. Thanks.

chorizo1 · « **Reply #5 on:** March 04, 2009, 02:10:00 PM »

http://forums.xbox-scene.com/index.php?showtopic=669731

I used a Ms25.

xbfan703 · « **Reply #6 on:** March 04, 2009, 03:28:00 PM »

chorizo1 thanks for your help

chorizo1 · « **Reply #7 on:** February 02, 2020, 04:33:00 PM »

QUOTE(xbfan703 @ Mar 4 2009, 05:04 PM)

chorizo1 thanks for your help

no problem, hope you get it working.

Author Topic: Toshiba Samsung Ts-h943-ms28 Not Seen By Xbox_backup_creator_v2.8 (Read 86 times)