I know these aren't the preferred burners for the 360 games.
However both have failed to burn properly on the sam branded disc.
Before I waste another 22.00 on disc maybe someone knows why neither burners complete disc?
Both dvd drives fail at writing the LEADIN & Leadout
QUOTE
I 08:50:00 ImgBurn Version 2.4.2.0 started!
I 08:50:00 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)
I 08:50:00 Total Physical Memory: 515,572 KB - Available: 240,060 KB
I 08:50:01 Initialising SPTI...
I 08:50:01 Searching for SCSI / ATAPI devices...
I 08:50:01 Found 1 DVD-ROM, 1 DVD-ROM/CD-RW and 1 DVD±RW!
I 08:57:39 Operation Started!
I 08:57:39 Source File: D:\360 Games\Sonic Hedgehog\Sonic Hedgehog Game.dvd
I 08:57:39 Source File Sectors: 3,825,631 (MODE1/2048)
I 08:57:39 Source File Size: 7,834,892,288 bytes
I 08:57:39 Source File Volume Identifier: XBOX360
I 08:57:39 Source File Volume Set Identifier: 33479a57
I 08:57:39 Source File Implementation Identifier: Daikin U.S. Comtec Lab
I 08:57:39 Source File File System(s): ISO9660, UDF (1.02)
I 08:57:39 Destination Device: [1:1:0] ATAPI DVD DD 2X16X4X16 G7V9 (F:) (ATA)
I 08:57:39 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x)
I 08:57:39 Destination Media Sectors: 4,173,824
I 08:57:39 Write Mode: DVD
I 08:57:39 Write Type: DAO
I 08:57:39 Write Speed: 2x
I 08:57:39 Link Size: Auto
I 08:57:39 Test Mode: No
I 08:57:39 OPC: No
I 08:57:39 BURN-Proof: Enabled
I 08:57:39 Optimal L0 Data Zone Capacity: 1,913,760
I 08:57:39 Optimal L0 Data Zone Method: Copied From Original Disc
I 08:57:41 Filling Buffer... (20 MB)
I 08:57:49 Writing LeadIn...
W 08:58:39 Failed to Write Sectors 0 - 31 - Reason: Session Fixation Error Writing Lead In
W 08:58:39 Retrying (1 of 20)...
W 08:59:26 Retry Failed - Reason: Session Fixation Error Writing Lead In
W 08:59:26 Retrying (2 of 20)...
SKIP continues error
W 09:05:58 Retrying (20 of 20)...
W 09:06:00 Retry Failed - Reason: Power Calibration Area Is Full
E 09:56:57 Failed to Write Sectors 0 - 31 - Reason: Session Fixation Error Writing Lead In
I 09:56:57 Synchronising Cache...
I 09:57:06 Closing Track...
I 09:57:07 Finalising Disc...
W 09:57:07 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session
W 09:57:07 Retrying (3 of 3)...
W 09:57:07 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session
E 09:57:07 Failed to Write Image!
E 09:57:07 Operation Failed! - Duration: 00:59:28
QUOTE
During the burn if you are getting “Session Fixation Errors”, “Optimum Power Calibration failures”, or “Invalid Write Address failures”, they are usually due to low quality media or a defective burner if you were using adequate media (look at this post).
I want to belive it's the media but maybe it could be both my burners, anyone with an idea, let me know.
This post has been edited by d-2-d: Feb 20 2009, 08:47 PM