Topic: problem getting drive detected (Read 25 times)

sosotiit · « **on:** May 15, 2007, 12:38:00 PM »

what drive samsung ms25/ms28? you must first run the 0800 disc in your drive for like 20sec

also connect to a sata port on your mb (not the pci card if you can)

-soso

sosotiit · « **Reply #1 on:** May 15, 2007, 01:56:00 PM »

Are you connected to your motherboard SATA (not the pci card sata), if you can try that .

sosotiit · « **Reply #2 on:** May 15, 2007, 04:09:00 PM »

try updating your pc bios, drivers and winupdates.

for your card, is it a 6421? which version of drivers
if so try the 5.2 drivers on viarena site, some of the drivers after that were causing problems

-soso

appleseed85 · « **Reply #3 on:** May 16, 2007, 10:26:00 PM »

anyone else have any ideas?

should I use xtreme0800.bin instead of activate.iso?
should I roll back my Via driver?
should I reflash my ms28 with a 52b,c,or d?
Is there a setting i need to change somewhere?

any suggestions would be much appreciated!

Author Topic: problem getting drive detected (Read 25 times)