Print

[Spruce goose]

Hi I have a 360  with xtreme 4.2a, a samsung SHD-162C with Kreon 0.81 for scanning and have used my acer notebook with LG GSA-4082N. I am using Verbatim DVD-R DL 8.5 GB x2.4 media and am making coasters? I used XBC v2.4 for scan & burn and am getting a miscompare error when verifying in imageburn, any ideas what the problem is? The game is Ghost Recon Advanced Warfighter, which boots up fine then locks up when loading a game.
The error log for the verifying screen is:

I 15:46:06 ImgBurn Version 2.2.0.0 started!
I 15:46:06 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 15:46:06 Total Physical Memory: 1,562,668 KB  -  Available: 991,656 KB
W 15:46:06 Drive C:\ (FAT32) does not support single files > 4 GB in size.
I 15:46:07 Initialising SPTI...
I 15:46:07 Searching for SCSI / ATAPI devices...
I 15:46:07 Found 1 DVD-ROM and 1 DVD±RW/RAM!
I 15:49:57 Operation Started!
I 15:49:57 Source Device: [0:1:0] HL-DT-ST DVDRAM GSA-4082N HR02 (E:) (ATA)
I 15:49:57 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) (Speeds: 2.4x)
I 15:49:57 Image File: D:\ghost.dvd
I 15:49:57 Image File Sectors: 3,697,696 (MODE1/2048)
I 15:49:57 Image File Size: 7,572,881,408 bytes
I 15:49:57 Image File Volume Identifier: XBOX360
I 15:49:57 Image File Implementation Identifier: Daikin U.S. Comtec Lab
I 15:49:57 Image File File System(s): ISO9660, UDF (1.02)
I 15:49:57 Verifying Sectors... (LBA: 0 - 3697695)
I 15:49:57 Verifying Layer 0... (LBA: 0 - 1913759)
W 15:56:16 Miscompare at LBA: 120000, Offset: 0
W 15:56:16 Device: 0x00
W 15:56:16 Image File: 0x54
W 15:56:16 Total Errors in Sector: 27
I 15:56:16 Verifying Sectors...
I 16:11:21 Verifying Layer 1... (LBA: 1913760 - 3697695)
I 16:26:16 Device MD5: 0fab1c7e8371d745f051af7d4e4f2e33
I 16:26:16 Image MD5: 641512b384cfaa4760c3f05124c7b822
I 16:26:16 Operation Successfully Completed! - Duration: 00:36:19
I 16:26:16 Average Verify Rate: 3,395 KB/s (2.5x) - Maximum Verify Rate: 5,590 KB/s (4.0x)

Any help for a newbie would be greatly appreciated.

[Chancer]

QUOTE

Drive C:\ (FAT32) does not support single files > 4 GB in size.

You may want to start by converting the HDD to NTFS

[Spruce goose]

QUOTE(Chancer @ Mar 7 2007, 06:36 PM)

You may want to start by converting the HDD to NTFS

I partitioned the C: drive and saved the image on the drive letter d: which was formatted as an NTFS, is this wrong? When I first tried to read to d: it gave me the FAT 32 error, so I reformatted as NTFS.

[sosotiit]

tempted to say try a different application like Schtrom , burn with  Imgburn .

rgds,soso

[Spruce goose]

QUOTE(sosotiit @ Mar 7 2007, 07:20 PM)

tempted to say try a different application like Schtrom , burn with  Imgburn .

rgds,soso

Can do, just don't want to waste any more Verbs if there is an obvious problem. I assume the LG burner should be ok? I am pretty confident the iso file is good, so is there a problem with the burn. I can try Schtrom, but I understood that XBC, imageburn & Schtrom all do pretty much the same thing.

I saw someone else has had success backing up with the above without any issues. Could it be a problem with the game as it is very new?

[Spruce goose]

QUOTE(Spruce goose @ Mar 7 2007, 07:27 PM)

Can do, just don't want to waste any more Verbs if there is an obvious problem. I assume the LG burner should be ok? I am pretty confident the iso file is good, so is there a problem with the burn. I can try Schtrom, but I understood that XBC, imageburn & Schtrom all do pretty much the same thing.

I saw someone else has had success backing up with the above without any issues. Could it be a problem with the game as it is very new?

Just used imageburn and whilst the verification worked perfectly, the game still locks up when you load a campaign. Can there be some added security on this game?

[sosotiit]

Is the original playing fine?

Have you tried backup of another game,

rgds,soso

[Birdy2k2]

I suggest having a look at rpc1.org and seeing if there is a firmware update for the burner.

[Spruce goose]

QUOTE(sosotiit @ Mar 8 2007, 12:16 AM)

Is the original playing fine?

Have you tried backup of another game,

rgds,soso

Yup it plays fine no problems.

[Spruce goose]

Has anyone successfully backed up this  game?

[Spruce goose]

QUOTE(Spruce goose @ Mar 8 2007, 08:50 AM)

Yup it plays fine no problems.

I have backed up a couple of my other games with XBC & imageburn and they are fine also.

[sosotiit]

from everything you say, you have burn games in the past, good media... so the setup for burning is good. If it is only that game, could be an image problem.
I would try redo the image with schtrom if you havent tried yet, run the stealth check on it to see if all the pieces are there.

rgds,soso

[Spruce goose]

QUOTE(sosotiit @ Mar 8 2007, 06:09 PM)

from everything you say, you have burn games in the past, good media... so the setup for burning is good. If it is only that game, could be an image problem.
I would try redo the image with schtrom if you havent tried yet, run the stealth check on it to see if all the pieces are there.

rgds,soso

OK, I said my other back ups were ok, after checking them again, even though they ripped and burned fine and got 100% verification and stealth check, they all seem to boot up fine, go through the opening screens but at the first loading they freeze!!!! (IMG:style_emoticons/default/mad.gif)

I have used either XBC and/or imageburn, haven't tried Schtrom yet, but don't want to waste any more Verbs before I know what the problem is.

[Spruce goose]

Used Schtrom and Imageburn same problem, getting quite frustrated now. (IMG:style_emoticons/default/blink.gif)