Topic: Tutorial: Xbox Backup Creator 2.6 And Imgburn 2.3 (Read 628 times)

sosotiit · « **Reply #30 on:** April 30, 2007, 06:23:00 AM »

first forget the size 6 font for a regular post !!!

second why would xbcr not give you a .dvd file.
redo you backups from the original with XBCr or schtrom and you will have all you need.

rgds, soso

somacast · « **Reply #31 on:** April 30, 2007, 06:36:00 AM »

ok no fonts , lolz

thnx for the quick answer , and sorry 2 trouble u , but wht is schtrom

thnx again

sosotiit · « **Reply #32 on:** April 30, 2007, 06:44:00 AM »

similar as XBCreator ,
also very good Schtrom.
only for extraction, must burn separately with Imgburn.

-soso

nhoj_yelbom · « **Reply #33 on:** May 02, 2007, 02:22:00 PM »

i got the samsung SH-S182 burner sold at best buy, it makes perfect backups

haihuy_2000 · « **Reply #34 on:** May 13, 2007, 10:04:00 AM »

Hi,
I am a newbie and want to know if I use XBC 2.5 and Imburn to backup my original xbox1 game, can the backup game play on the XBOX1 (hack one)? Thanks in advance for the info.

sosotiit · « **Reply #35 on:** May 13, 2007, 10:51:00 AM »

no, backup made for x360, will only boot on x360.
xbox1 requires patched xbe files

if you are looking for a way to backup a Xbox1 game with XBCr/shd162c for use in a Xbox1, then look at How To Do Xbox 1 Backup From Your Pc Only.

good luck
soso

This post has been edited by sosotiit: May 13 2007, 05:52 PM

RONTEK · « **Reply #36 on:** May 20, 2007, 09:08:00 PM »

I have a TS-H943A and XBC 2.5 see's it fine and sees the disc, but shows a huge size (4 TB) with any game disc I try. Also my start button is greyed out. I have no problem ripping images with schtrom32 and burning with imgeburn so I know my SATA Card (VIA1642) my connection and drive are fine. Any ideas why I am getting the greyed out start buttion with XMC? And how about the strange disc size it reads?

Thanks,

Ron

novak2k7 · « **Reply #37 on:** May 21, 2007, 05:06:00 AM »

im new to backing up, first 3 discs failed on write.

I used xbc2.5 and imgburn 2.3 to make backups of both my nhl2k7 and college hoops 2k7. No problems at all reading and making images, but when burning i'm getting crc write errors.

first 2 burns lasted until 2% and 15% before crc errors

third burn I used xbc to write, it resulted in a failed write.

everything done according to tutorial. I using a pioneer 111d, kreon drive, and verbatim +r dl
2.4x write speed, burner is only a couple months old. I tested by burning a full data dvd is it was good

any suggestions? I might install a new hard drive and fresh copy of xp tomorrow

This post has been edited by novak2k7: May 21 2007, 12:14 PM

novak2k7 · « **Reply #38 on:** May 21, 2007, 10:33:00 PM »

ok it was my HD. when I was backing up my stuff before new HD install I was getting crc errors on some files. I moved the kreon and burner to another system and ran XBC for read and write, 100% success on 2 originals.

downset · « **Reply #39 on:** May 22, 2007, 05:56:00 AM »

is there any quality difference in writing when using XBCr or imgBurn?

i burned 8 backups (read with a kreon fw drive) with no problems and have used both imgbrn and xbcr, just wondering what is supposed to be the best if any difference at all

muzzy123 · « **Reply #40 on:** May 24, 2007, 05:08:00 AM »

I wanna tell everybody that there is no problem if you are not having a small DVD file under the image. I´ve burned 11 games, all without any dvd file, could anyone tell what it actually i doing there for?

sosotiit · « **Reply #41 on:** May 24, 2007, 06:06:00 AM »

the file was there to communicate where to separate the first and second layer.
If you burn without xbc and do not set the layerbreak manually, then you need it to say where to split.

When using XBC engine or XBC to call imgburn, all of that is manage by XBC so it is more or less useless.

-soso

Firf · « **Reply #42 on:** May 24, 2007, 08:33:00 AM »

Newbie question - (I didn't think I was a newbie, but I guess I am!)...

Is there a way to check a current backup for SS, Stealth, PFI, etc... from the backup (already on a DVD DL and working) without having to re-extract it first? I tried to simply use XBOX Creator v2.5, however after loading it simply shows basic info... Anything else I try to do seems to require an ISO or the vid files and will not seem to look to the DVD DL backup in the drive for the additional information.

With all the talk as of late, just want to go through backups and ensure they were done correctly...

Any help is appreciated!

Thanks!

Woops, think I just found a link on how to do it... I'll ask again if I'm wrong (IMG:style_emoticons/default/smile.gif)

This post has been edited by Firf: May 24 2007, 03:46 PM

jmandrak · « **Reply #43 on:** May 25, 2007, 11:00:00 AM »

I'm using XBC v2.5, my 360 drive is a samsung MS25...

I have a xtrm0800.bin file which came along with my Xtreme 5.2 package. If I flash this file into the drive, will I be able to make a 100% copy (DMI, PFI, SS, Video)?

sosotiit · « **Reply #44 on:** May 25, 2007, 11:41:00 AM »

you do not need to flash it the drive anymore, just burn it on dvd, and run it for 20 to 30 sec, they your drive will be seen in windows. Then the rip with XBC will have everything (video, dmi, pfi).

-soso

Author Topic: Tutorial: Xbox Backup Creator 2.6 And Imgburn 2.3 (Read 628 times)