Topic: Tutorial: Xbox Backup Creator 2.6 And Imgburn 2.3 (Read 629 times)

wlintek · « **Reply #15 on:** March 17, 2007, 03:03:00 AM »

QUOTE(sosotiit @ Mar 17 2007, 01:46 AM)

what is the question exactly?
-is it that the image is always 7.05BG (if so they are all that size)
rgds, soso

if i'm not wrong, the image after ripping should always be 7.3GB but mine is always 7.05gb so it does not work. tried the burnt disc at both native JAP and PAL consoles same result. this is my first back up game that does not work using xbc and sh-d162c. i just want to know if there is a special method to back uop this game?

sosotiit · « **Reply #16 on:** March 17, 2007, 07:05:00 AM »

you are wrong, it is suppose to be 7,395,392KB (not 7.3GB). Since converting from KB to MB to GB requires to divide by 1024 (not 1000 since it is binary based) that gives 7,395,392KB /1024/1024=7.05GB.

That 7.05GB is mentionned often, a bit of research plse

rgds,soso

wlintek · « **Reply #17 on:** March 17, 2007, 04:52:00 PM »

QUOTE(sosotiit @ Mar 17 2007, 02:05 PM)

you are wrong, it is suppose to be 7,395,392KB (not 7.3GB). Since converting from KB to MB to GB requires to divide by 1024 (not 1000 since it is binary based) that gives 7,395,392KB /1024/1024=7.05GB.

That 7.05GB is mentionned often, a bit of research plse (IMG:style_emoticons/default/wink.gif)
rgds,soso

thanks for your help. i just don't know why winning11 does not work for me used same method doing the back up. i thought the size of the image might be the issue as it's a bit smaller than those worked images that i did.

kbracing6 · « **Reply #18 on:** March 29, 2007, 08:25:00 PM »

Great Work! I followed BURNING METHOD B: WITH IMGBURN 2.3 with my NEC DVD RW ND-2500A(Flashed With Herrie's NEC Firmware to NEC DVD RW ND-2510A) burned Tetris Evolution on Verbatim DVD+RL 2.4x and everything worked FINE!!! Once again great tutorial!

JooV · « **Reply #19 on:** April 03, 2007, 03:50:00 PM »

Strange error: The start button on my Xbox Backup Creator is not clickable... Why is that?

ScrewinGates · « **Reply #20 on:** April 03, 2007, 04:11:00 PM »

mine was like that..then i noticed i had the wrong dvd drive selected

Inspector9 · « **Reply #21 on:** April 09, 2007, 06:04:00 PM »

My start button wont light either!!! It reads the drive and reports

Found ODD: TSSTcorp DVD-ROM SH-D162C TS04 at [0:0]
Getting media info [0:0]

Media Type: DVD-ROM
Bytes Used: 6.87 MB (7,206,912 bytes)

also

Found ODD: TSSTcorp DVD-ROM SH-D162C TS04 at [Z]
Additional Info: XB360 KREON V0.81
Nero v7.5.7.0
ImgBurn 2.2.0.0 is available
ImgBurn - The Ultimate Image Burner! by LIGHTNING UK!
Getting media info [Z]

I've tried reinstalling the program twice. Am I missing something?

TIA

Inspector9 · « **Reply #22 on:** April 11, 2007, 08:38:00 AM »

Eureka!!! I solved my own problem. XBC does NOT, I repeat DOES NOT work with slysoft AnyDVD or CloneCD Tray running! Disable these and turn off autostart and you shouldn't have any more problems. Also scale back the DMA and PIO in the bios seams to help since this is an older drive. I scaled back from UltraDMA to MAXDMA and PIO 4 to PIO 3 with complete success.

Good luck to all

chucky_1873 · « **Reply #23 on:** April 19, 2007, 02:58:00 PM »

does anybody know what this means

Xbox Backup Creator v2.5 Build:0230 By Redline99

Found ODD: HL-DT-ST DVD-RW GWA-4165B DG01 at [E]
Additional Info:
Nero API is not available
ImgBurn executable not found

thanks

sosotiit · « **Reply #24 on:** April 19, 2007, 03:37:00 PM »

you probably do not have nero or imgbrun installed on your PC.

not a problem since you can still brun by selecting XBC engine.

rgds, soso

sosotiit · « **Reply #25 on:** April 22, 2007, 06:05:00 AM »

it should not prevent you from extracting, what drive are you using to extract?

rgds, soso

chucky_1873 · « **Reply #26 on:** April 22, 2007, 07:15:00 AM »

dvd + - rw dl multi format drive i think

sosotiit · « **Reply #27 on:** April 22, 2007, 08:39:00 AM »

Well , respectfully , you should do a lot more reading. Because all tutorial and the smallest amount of reading of the pinned Backup Faq - Everything* You Need To Know PLEASE READ BEFORE ASKING QUESTIONS! would have told you that you cannot use your regular burner for that.

also in the tutorial above "Select your ripping drive like SH-D162C (other model in the pinned topic)"

There are only 4 PC drives that can do backup (shd162c and 3 others) with xbcr, also the x360 samsung.

otherwise you need to use wxripper.

time for some reading in the pinned section

rgds, soso

sosotiit · « **Reply #28 on:** April 30, 2007, 06:07:00 AM »

QUOTE(nhoj_yelbom @ Apr 29 2007, 10:10 PM)

would this pioneer dvd burner work?
http://www.bestbuy.com/site/olspage.jsp?sk...d=1165609038260

check the pinned for the pioneer 112 thread,
pretty sure this is a the retail version of the pioneer 112, anyway the pioneers all do good for x360 backup.
rgds, soso

This post has been edited by sosotiit: Apr 30 2007, 03:29 PM

somacast · « **Reply #29 on:** April 30, 2007, 05:35:00 AM »

hiii , thnx alot for the flawless method , but i have a small problem , iam getting only the main iso file of 7.05 GB , and i didnt get the 1 kb .DVD file .

my question is : can i just burn this .iso file with imgburn or nero or any other without the .dvd file

plz help me .....

(note : ive tried to read using 2 different drives one is LG extrnal DVD writer model GSA-E10L , and the other is philips DVD writer , and using both i got only one file )...

thnx aloooot

Author Topic: Tutorial: Xbox Backup Creator 2.6 And Imgburn 2.3 (Read 629 times)