Print

[kefp]

Thanks.

Was hoping some had a similar problem.

[Ruined]

Alright, this is my absolute last resort.

I have the SH-163A drive flashed with the Kreon Firmware.

It comes up fine in xbox backup creator. It recognizes the disc, and it even says it has the Kreon firmware. But for the love of God, I can not click start. It doesn't give me the option. I have the right drive selected, I have a xbox original disc in the drive. I have searched everywhere and I can't find shit about it.

The flashing software, SDFNWIN I believe it's called, has all my drives listed in the pulldown menu, but none of the drives info pops up when I select them. When I try to flash the firmware again (although it is already flashed) it gives me an incompatible firmware error.

I thought it might be my onboard SATA (I have an ASUS A8V mobo), so I bought the RC-212 Rosewill SATA controller card. It has the 6421 chipset I've seen is recommended, so I figured it would work. I get the SAME exact error.

I've tried reinstalling XBC. I've tried switching sata ports, I've tried updating the SATA drivers, I have tried every damn thing I've been able to find, but I am having no luck. It's driving me nuts.

When I hook it up to the onboard SATA on another computer with an A8V-XE mobo, it works flawlessly.  It is driving me fucking BANANAS. Does anyone have any suggestions? Anyone ever experience this before?

I've also tried Schtrom and XDVDMueller (I think those are the names). Is there another program that might work that someone could link me up to?

I also read somewhere that someone had this problem because their IDE driver was outdated. I can't find an updated driver for my motherboard anywhere. Any suggestions as to that?

I've purchased the 162-C to avoid the SATA problem, but I get the feeling that's not going to help.


For the love of all that is good, PLEASE help me!

[sosotiit]

a few person are having problem with Via chipset to extract, and both your onboard and card are via
hopefully the 162c will go better

-soso

This post has been edited by sosotiit: Sep 5 2007, 11:33 PM

[Ruined]

ok, so I gave making a back up Dead Rising on the computer the drive works on a shot.

My 360 isn't reading it (YES it's flashed). I followed all the instructions... I mean, not too hard, put the disc in, hit start, burn the resulting iso. I didn't change the booktype on the drive I used to burn, however. Would that make it not work?


Sorry. I'm just getting into this.

[dmatrix]

QUOTE(Ruined @ Sep 5 2007, 11:48 PM)

Alright, this is my absolute last resort.

I have the SH-163A drive flashed with the Kreon Firmware.

It comes up fine in xbox backup creator. It recognizes the disc, and it even says it has the Kreon firmware. But for the love of God, I can not click start. It doesn't give me the option. I have the right drive selected, I have a xbox original disc in the drive. I have searched everywhere and I can't find shit about it.

The flashing software, SDFNWIN I believe it's called, has all my drives listed in the pulldown menu, but none of the drives info pops up when I select them. When I try to flash the firmware again (although it is already flashed) it gives me an incompatible firmware error.

I thought it might be my onboard SATA (I have an ASUS A8V mobo), so I bought the RC-212 Rosewill SATA controller card. It has the 6421 chipset I've seen is recommended, so I figured it would work. I get the SAME exact error.

I've tried reinstalling XBC. I've tried switching sata ports, I've tried updating the SATA drivers, I have tried every damn thing I've been able to find, but I am having no luck. It's driving me nuts.

When I hook it up to the onboard SATA on another computer with an A8V-XE mobo, it works flawlessly.  It is driving me fucking BANANAS. Does anyone have any suggestions? Anyone ever experience this before?

I've also tried Schtrom and XDVDMueller (I think those are the names). Is there another program that might work that someone could link me up to?

I also read somewhere that someone had this problem because their IDE driver was outdated. I can't find an updated driver for my motherboard anywhere. Any suggestions as to that?

I've purchased the 162-C to avoid the SATA problem, but I get the feeling that's not going to help.
For the love of all that is good, PLEASE help me!

Man I have the exact same problem with a similar mobo, Asus K8V SE. It is also driving me bannanas. I have upgraded my bios to the latest, tried different sata drivers and different sata ports and I still cannot get XBC or Schrom to rip from the drive. XBC just has the Start button grayed out and Schrom doesn't even list the drive, yet it lists my Pioneer burner just fine. I am going to try a fresh install of XP and play with different SATA drivers again. I have searched and searched now for weeks and have found others with the exact same problem and have tried their fixes. ie. upgrading bios, making sure sata is plugged into the VIA and not the promise raid sata ports, disabling the onboard sata bootrom in the bios and ensuring the operating mode is set to onboard IDE. Nothing has changed, it still doesn't work.

If anyone has any other ideas I am game to try them. My last resort after reinstalling and playing with drivers is to try an usb enclosure.

[sosotiit]

QUOTE(dmatrix @ Sep 7 2007, 02:37 PM)

If anyone has any other ideas I am game to try them. My last resort after reinstalling and playing with drivers is to try an usb enclosure.

probably a good idea, check around to find one that is compatible with x360 backup, some people posted on that.

[xtacybyme]

hello all, im lost here!  

I been backing up my sons games for almost  a year now with now problems. the last 4 games ive tried to do WILL NOT WORK, spiderman 3, def jam icon, Overlord, gears of war.  I  test XBC with the my burgerking xbox 360 game to make sure software was working. cause that one has always been able to read

Was using XBC 2.3 then went to 2.5.

Have also tried newest version! just yesterday

reason im here, well i cant even get the burger king game to rip anymore.

I open XBC put disc in, and start button is greyed out. (same issue many others are having)
this is what i get, i have always done everything from with in XBC. (I've backup over 40 games) Am i missing  a plugin? Is my firmware on the D162c to old? (it can't be the version of my firmware cause then the burgerking game would read and i could hit start\My theory...since it has worked from day one of doing backups) I have never had Image burn installed on this machine. i tried intalling that to see if it would help me get the start button back, i have rebooted machine MANY TIMES, Only other thing i have done is installed new version of nero 7.10.00 i always uninstalled that and went back to old version 7.5 to test and that didnt help either. I've checked google and well this is where its being mentioned so thought i'd throw a post out there.

Any ideas\help would be GREATLY appreciated!

Also ive yet to recieve email from xbox scene so will have to check back periodically. my junk folder is empty. so not sure wh im not recieving them.

(IMG:http://i24.photobucket.com/albums/c36/Xtacybyme/xbcerror.jpg)

This post has been edited by xtacybyme: Sep 12 2007, 09:13 PM

[dmatrix]

QUOTE(sosotiit @ Sep 8 2007, 02:11 AM)

probably a good idea, check around to find one that is compatible with x360 backup, some people posted on that.

ya i got a usb/sata adaptor and it works just fine with both tools. damn via sata chipset gave me so much grief, should have just got a usb/sata adaptor in the first place.

[xtacybyme]

any ideas please?

i'm still working on it here but have had no headway.

[sosotiit]

usually shd162c Kreon drive will say that it is Kreon, and they show as TS04, yours show ts05 with no additional info line. Is it possible that the firmware on your SHD162C was updated to TS05 therefore overwritting the Kreon.

usually in XBC you will get (IMG:http://memberuploads.xbox-scene.com/uploads/2007_09_15/18_15_41_cbc.jpg)

and in schtrom you get
(IMG:http://memberuploads.xbox-scene.com/uploads/2007_09_15/18_16_11_sch.jpg)

I would reflash the SHD162C with Kreon FW


also I would used XBC burning engine or XBC to call imgburn (free)

This post has been edited by sosotiit: Sep 15 2007, 10:49 PM

[xtacybyme]

well i  have contacted the guy who flashed it for me and he's yet to get back to me. but i dont recall ever seen kreaon on it??

 ive had this drive flashed since the players have been out. over a yr now??...

I have not reformatted computer or anything. is it possible the firmware just disappears?  all i have done was upgraded nero versions thats it. can software programs change the firmmware with out me knowing?



Thanks for Reply sosotiit.

[sosotiit]

maybe some auto update in windows?? or other, but it does not look Kreon at the moment

[xtacybyme]

well i talked with my buddy outta state who flashed this whom i bought the drive from orginally. he im'd me the firmware again. and you were right it was 05 and after flashin with his it went to 04. and i have tried using Xbc and it has worked flawlessly again. I asked him what he thought the reason may be. and he's not sure how it happened either. Be interesting to knwo the reason it happened. all i can think of is that i added a samsung lightscribe to my custom machine here, and maybe when installing that dvd drive it somehow ran into comatibility issues? or updated theother drive?

But again Thnak you sosotiit for your help and fast replies

I'm back and running.

And for those others that may run into the same issue. now ya know what fixed it for me.

Take Care.

[zenkiS14]

When I try to backup a game I get this error "Error opening DVD-Rom [D] for exclusive access"  I have backed up many games before but lately I have been making some coasters.  

I was using an older version of imgburn that worked great then I started to get errors 3/4 burn.  So I wanted to try the current method with xbc, but when I open the iso, I get the stated error.  Any help??

EDIT: Ive made coasters with both Verbatim and Memorex DL.  I get the error with games I have backed up before.  My drives are a NEC 3500ag and a LiteOn SHW-160p6s

Thanks

This post has been edited by zenkiS14: Sep 26 2007, 04:38 PM

[erebay]

I am using the SH-D162C drive with Kreon 0.81 fw + xbox backup creator v 2.6 to rip Halo3 and
the resultant files are a 1kb dvd file and a 7,651,848 kb file (7,835,492,352 bytes).  The same for bioshock.

Is this the correct file size???  What may I be doing wrong?

I used the search function and could not find an answer.