Topic: Tutorial: Xbox Backup Creator 2.6 And Imgburn 2.3 (Read 628 times)

luckysock · « **Reply #60 on:** July 25, 2007, 10:20:00 AM »

hi,

i'm having a problem with xbox backup creator v2.5.. I have a sammy with the kreon firmware v0.81. and just got me a 112d burner.

now the problem is I cant actually press the start button on the read tab, it's not highlighted.

the sammy is recongised along with the disc, 360 disc by the way.

I've unistalled and reinstalled countless times and no change.

I'm working off a laptop, got an ide to usb adapter for the sammy, dont know if this is the problem

I know its going to be somthing obvious but i need help please...anyone?

cheers

sosotiit · « **Reply #61 on:** July 25, 2007, 10:59:00 AM »

you are most probably right that usb to sata is the issue. Some people had success with USB adapter/enclosure, some it did not work.

-soso

pan1c · « **Reply #62 on:** August 12, 2007, 03:27:00 PM »

QUOTE(maynerd @ Jul 22 2007, 06:59 PM)

i was hoping someone could help me with my problem. I follow this tutorial up to step 4, but i am not able to push start, it is not an option. The ripping drive i hav selected is my only one, so it could be my drive. My drive is "NEC DVD+-RW ND-6650A 102C". I have tried xbox backup creator 2.4 and 2.5 and the same problem. O ya, and i'm trying to burn 360 games. please help.

ive tried it all as well but I still cannot push the button, my drive is on the compatibility list liteon SOHW 1693s and I just upgrade the firmware as well to KCB4.

sosotiit · « **Reply #63 on:** August 12, 2007, 03:36:00 PM »

have you really read my answer to him (IMG:style_emoticons/default/wink.gif) ? It refers to step 2 and the sticky at the top of the forum saying Backup Faq - Everything* You Need To Know PLEASE READ BEFORE ASKING QUESTIONS!

where you find

QUOTE

The only PC DVD-ROM models the can be used with Kreon FW to rip entire games (including SS, DMI, PFI,Video and game partitions) with XBCreator (or Schtrom) are: IDE = SH-D162C and TS-H352C; SATA =SH-D163A and TS-H353A.
And every letter in the designation is important (i.e. SH-D162A is not good)

-soso

This post has been edited by sosotiit: Aug 12 2007, 10:36 PM

pan1c · « **Reply #64 on:** August 12, 2007, 03:51:00 PM »

QUOTE(sosotiit @ Aug 12 2007, 10:36 PM)

have you really read my answer to him (IMG:style_emoticons/default/wink.gif) ? It refers to step 2 and the sticky at the top of the forum saying Backup Faq - Everything* You Need To Know PLEASE READ BEFORE ASKING QUESTIONS!

where you find
-soso

yes, I did...excuse me for being completely retarded but it got to be harder to understand especially after reading in the compatibility list that my drive was in fact one that was used and working ( burned 45 copies)

so are you saying that my drive will not work for the task? is there another way?

chorizo1 · « **Reply #65 on:** August 12, 2007, 04:08:00 PM »

QUOTE(pan1c @ Aug 12 2007, 04:51 PM)

yes, I did...excuse me for being completely retarded but it got to be harder to understand especially after reading in the compatibility list that my drive was in fact one that was used and working ( burned 45 copies)

so are you saying that my drive will not work for the task? is there another way?

you can't burn the game if you can't rip it first.

The only drives that allow you to do that are already listed for you. you need one of those to rip the game first.

sosotiit · « **Reply #66 on:** August 12, 2007, 04:09:00 PM »

it works to burn, but not to rip.

in order to extract the game from the original disk you need a drive with Kreon FW (the four drive in the sticky) or a x360 samsung flashed back to 5.3 for ripping.

-soso

pan1c · « **Reply #67 on:** August 12, 2007, 07:24:00 PM »

QUOTE(sosotiit @ Aug 12 2007, 11:45 PM)

it works to burn, but not to rip.

in order to extract the game from the original disk you need a drive with Kreon FW (the four drive in the sticky) or a x360 samsung flashed back to 5.3 for ripping.

-soso

ok, sounds good, i guess ill go buy a new drive.....thanks

jay_Z_100 · « **Reply #68 on:** August 17, 2007, 07:06:00 PM »

I'm having trouble backing up an Xbox game (Fable) with backup creator on a Single layer DVD.
I can rip it fine and I get the correct size ISO but when I then follow the OP on step number 7 I always get an error saying unhandeled exception. I'm not sure what an SS file is or what it means when it says "You may have to select generic for DVD5"

I put the steps below so if anyone has any ideas. I'm also using Version 1.0.0 of Xdvdmulleter Beta 8.

"Single Layer Backups
Only Xbox 1 titles can be made on SL disc and it requires FW 5.3 or prior on your X360 samsung Drive (iXtreme does not support Sl anymore and Hitachi drive never supported that feature)
1 - Do your iso like you would do it for a dual layer backup (xbox 1) as per tutorial above
2 - Instead of burning, open Xdvdmulleter,
3 - select Build an ISO, Next
4 - Load from file, select the ISO, next
5 - select Create DVD5 ISO, next
6 - region, next
7 - For SS file , Load from source iso (you may have to select generic for DVD5), next
8 -Sealth sectors, Use source ISO, Next
9 - layout, optimize for Disk or load a layout file if you have one
10 - make iso"

Pickle_mole · « **Reply #69 on:** August 19, 2007, 08:09:00 PM »

Ive searched the FAQ and this thread for an answer and i can not find one so please dont shoot me if i missed it! Any ways, to the point, Ive burned a game and i put it in my 360 and it says put it into a xbox 360. My xbox is not modded or flashed, is it required? o and i burned with xbc and img burn, same results. the media is memorex (made in taiwan) dvd+r dl.

jay_Z_100 · « **Reply #70 on:** August 20, 2007, 01:16:00 AM »

QUOTE(Pickle_mole @ Aug 20 2007, 12:45 PM)

Ive searched the FAQ and this thread for an answer and i can not find one so please dont shoot me if i missed it! Any ways, to the point, Ive burned a game and i put it in my 360 and it says put it into a xbox 360. My xbox is not modded or flashed, is it required? o and i burned with xbc and img burn, same results. the media is memorex (made in taiwan) dvd+r dl.

You need to have a modded 360. but if you mod it, it will probably not function on Xbox live.

ATI-SPY · « **Reply #71 on:** August 21, 2007, 01:04:00 PM »

ok probably a dumb question.. so im to the understanding to use a SAMSUNG SH-D162C DVD to rip/imagefile and then use Pioneer DVR-111 to burn the the image back to disc. besides these 2 drives and software and of course the verbation Media disc.. is there anything else that is needed before or to burn a backup of a 360 game?

jay_Z_100 · « **Reply #72 on:** August 22, 2007, 10:33:00 PM »

QUOTE(ATI-SPY @ Aug 22 2007, 05:40 AM)

ok probably a dumb question.. so im to the understanding to use a SAMSUNG SH-D162C DVD to rip/imagefile and then use Pioneer DVR-111 to burn the the image back to disc. besides these 2 drives and software and of course the verbation Media disc.. is there anything else that is needed before or to burn a backup of a 360 game?

No that's all I use.
Make sure you use DVD+R DL because 1 time I bought a pack of DVD-R DL and then it went to waste.
Also make sure the original discs are clean and don't have scratches otherwise it might not rip it. That happened 2 me 1 time so I then used Schrotom(?) to rip it.

And If anyone knows any ideas to my problem up above please help out.

kefp · « **Reply #73 on:** August 29, 2007, 05:05:00 PM »

Setup : Sammy 162C with Kreon FW in an external USB enclosure.

While I am able to backup using Schtrom360Xtract V3.3 very nicely, I have never been able to backup with Xbox Backup Creator v2.5. It always stop ripping around 25%.

Any thoughts?

Thanks

sosotiit · « **Reply #74 on:** August 30, 2007, 04:49:00 PM »

try direct in your PC, sorry, as good as I can say (or try another enclosure)

-soso

Author Topic: Tutorial: Xbox Backup Creator 2.6 And Imgburn 2.3 (Read 628 times)