Topic: Tutorial: Xbox Backup Creator 2.6 And Imgburn 2.3 (Read 628 times)

jmandrak · « **Reply #45 on:** May 25, 2007, 12:01:00 PM »

This file I'm speaking of is only 256Kb.

So I just burn a normal dvd with this file on it and leave it runnig for 20-30 secs? I also have a Enable0800 disk, but once I insert the game DVD, the drive disappears from windows.

I'm using Xtreme 5.3 now, and there is no xtrm0800 in the 5.3 package. So I guess this file I have is not even part of the 5.2 version either... maybe some earlier version.

sosotiit · « **Reply #46 on:** May 25, 2007, 01:30:00 PM »

version 4 and before I believe
-soso

Logi7 · « **Reply #47 on:** June 14, 2007, 03:41:00 PM »

QUOTE(novak2k7 @ May 21 2007, 12:42 PM)

im new to backing up, first 3 discs failed on write.

I used xbc2.5 and imgburn 2.3 to make backups of both my nhl2k7 and college hoops 2k7. No problems at all reading and making images, but when burning i'm getting crc write errors.

first 2 burns lasted until 2% and 15% before crc errors

third burn I used xbc to write, it resulted in a failed write.

everything done according to tutorial. I using a pioneer 111d, kreon drive, and verbatim +r dl
2.4x write speed, burner is only a couple months old. I tested by burning a full data dvd is it was good

any suggestions? I might install a new hard drive and fresh copy of xp tomorrow

maybe your drive is dying

sosotiit · « **Reply #48 on:** July 02, 2007, 06:08:00 PM »

@seve85

not a matter of firmware, but as a newcomer you should read the pinned Backup Faq - Everything* You Need To Know PLEASE READ BEFORE ASKING QUESTIONS!

QUOTE(sosotiit @ Apr 22 2007, 11:15 AM)

Well , respectfully , you should do a lot more reading. Because all tutorial and the smallest amount of reading of the pinned Backup Faq - Everything* You Need To Know PLEASE READ BEFORE ASKING QUESTIONS! would have told you that you cannot use your regular burner for that.

also in the tutorial above "Select your ripping drive like SH-D162C (other model in the pinned topic)"

There are only 4 PC drives that can do backup (shd162c and 3 others) with xbcr, also the x360 samsung.

otherwise you need to use wxripper.

time for some reading in the pinned section (IMG:style_emoticons/default/wink.gif)

rgds, soso

as well as previous post ^^ of a thread. Both would have told you that your drive cannot extract games from original disc.

also, as per our rules, no backup of backup, plse do not discuss extraction from existing backups, only from original.

-soso

This post has been edited by sosotiit: Jul 3 2007, 01:10 AM

Spartiku5 · « **Reply #49 on:** July 04, 2007, 06:38:00 AM »

If i use my SH-D162c +kreon f/w and burn with imageburn on my 112d will my games be stealthed ,It's just a cant find any stealthing info when using the SH-D162c/112d.
Cheers for any help

sosotiit · « **Reply #50 on:** July 04, 2007, 07:05:00 AM »

Media Stealth: What is needed and How To Verify, (DMI, PFI, Video Partition, Samsung SS)

yes if you use SH-D162c +kreon f/w and XBC (or schtrom), you will get full stealth,

-soso

klideas · « **Reply #51 on:** July 07, 2007, 06:32:00 PM »

Anyone know what this error means DeviceIoControl (FSCTL)_Lock_Volume)failed! Device :[3:0:0] Sony DVD RW DRU-830a ss25(E:) (ATA) unable to lock volume for exchange access. Reason: Access Denied. Im using VERBATIM DVD+R DL.

sosotiit · « **Reply #52 on:** July 07, 2007, 06:30:00 PM »

is that trying to burn? (you sometimes get that at extraction)
is it your first? our you have others successful before?

also how was the image extracted: software, Drive/fw..?

-soso

hg_gt · « **Reply #53 on:** July 14, 2007, 09:53:00 PM »

"SOME COMMON PROBLEMS
Ripping is extremely long (30+ minutes): Your Drive is probably not in DMA Mode (Went in PIO Mode). You can change that in Device Manager and can easily be found via Google "

My ISO's are taking 60+ minutes to make... and i have googled and tried many of the suggestions to switch to DMA from PIO

1. Tried the script that changes and then u reset
2. Tried uninstalling the IDE primary and secondary and then resetting to have windows find
3. I have not tried bios but they say bios but not WHERE in bios

lastly i found that once a drive messes up 6 times or something it reverts to PIO permanently till something is done supposebly. I go to device manager and put DMA when available but the current transfer mode is constantly set at PIO....any suggestions?

Gt

sosotiit · « **Reply #54 on:** July 15, 2007, 07:07:00 AM »

Is it possible you have something else on that channel that does that (old device), try it by itself on that channel,
also
http://winhlp.com/WxDMA.htm

-soso

hg_gt · « **Reply #55 on:** July 16, 2007, 08:32:00 AM »

I tried to mess with it for a few hours yesterday and still got nothing.....i cannot for the life of me reset it to DMA and that has GOTTA be the problem. There wasnt any option within my bios to change it either. I reflashed it, reset my machine, changed the transfer mode back and forth, used the script, tried uninstalling it then having windows recognises it but still.....it remains in PIO

i think the only thing i can do to change it is just get an external enclosure and plug it via usb to subside this PIO horror....unless anyone knows any other ways to surpass it....i think ive tried everything except BIOS which i didnt see anything in there. If anyone is familiar with the intel chipset motherboard bios and knows how to change to DMA i guess lemme know. I think im going to get an external enclosure from best buy today (one that it used for hard drives with an IDE interface) and jsut rip out the wiring and use that for my drive.... i imagine that should work. Ill keep you all updated and if anyone thinks up anything in the meantime please post or PM me here

Gt

hg_gt · « **Reply #56 on:** July 17, 2007, 08:53:00 AM »

W000 I AM CORRECT!!! For those of you that takes longer than about 20 minutes to make an ISO and you cannot figure out why I HAVE FOUND THE SOLLUTION.

Get and External Enclosure for your Kreon drive. By going through USB 2.0 you surpass the PIO and DMA modes. It was taking me 75 minutes to make an ISO before and now i making an ISO at this very moment and im @ about 40% in 6 minute leaving a total burning time of anywhere from 15-20 minutes down from previously 75 minutes!

Is it worth it to you to save those extra minutes? Hehe im glad i have supplied some information to the scene. It may not be BIG news but i guarentee many will be happy =)

Edit:Total ISO making time:14 minutes at 15 seconds =)

Gt

This post has been edited by hg_gt: Jul 17 2007, 04:01 PM

maynerd · « **Reply #57 on:** July 22, 2007, 11:59:00 AM »

i was hoping someone could help me with my problem. I follow this tutorial up to step 4, but i am not able to push start, it is not an option. The ripping drive i hav selected is my only one, so it could be my drive. My drive is "NEC DVD+-RW ND-6650A 102C". I have tried xbox backup creator 2.4 and 2.5 and the same problem. O ya, and i'm trying to burn 360 games. please help.

sosotiit · « **Reply #58 on:** July 22, 2007, 11:50:00 AM »

Have you rread step 2, only drive to rip are...

your dirve is not one of them, you may burn with it but only very specific model can rip

-soso

maynerd · « **Reply #59 on:** July 22, 2007, 02:02:00 PM »

thanks a ton. now i what the problem is at least.
Great tutorial by the way.

Author Topic: Tutorial: Xbox Backup Creator 2.6 And Imgburn 2.3 (Read 628 times)