Print

[sosotiit]

does it say Used size = 5.32mB?

if so yes it is the same problem,
before you try extracting the Current Partition you must press the Unlock twice

or use isobuster

rgds,soso

[gilster]

worked like a charm, thanks soso!

[tazz28]

ok im still having problems doing this... i have kreon .81
if i select complete backup it dont do anything
if i select current partition it will but then i have to patch all the ss and everything myself


what am i doing wrong.... this is the only game i have had a prob with doing a complete backup
       

[sosotiit]

nothing wrong really, that is the way it is.

extract all pieces seperately as per the StarTrek legacy Thread and join them using ssmerger.

rgds,soso

[plouie10]

Hi,
Great forum. You've all been a great help. Here's my problem. I have the Samsung with kreon firmware and have installed the nme 1.2 chip. Everything works great with schtrom360 and imgburn. Of course this Fuzion Frenzy 2 is different. So I read on this forum how to use XBC and extract partition only and extract ss,pfi and dmi seperately and merge with ssmerger 1.7b. So everthing works fine and I choose not to add video partition and choose pad with blank and leave create a nme compatible iso. Everything looks fine and I hit the merge button. This only takes about 15 seconds and says everthing is okay and to burn with clonecd. So I burn with imgburn and when I pop the disc in it just says reading and doesn't do anything. So I thought perhaps I should run through nme associator. So I do the whole thing again and same result. The only thing I notice on ssmerger is that the ssfile: is still red and the required ss file is blank along with the nme ss. So I'm wondering if somebody much smarter than I could shed some light onto what I might be missing or doing wrong. I am burning dual layer verbatim on pioneer 111d. This is of course the first one that I haven't have any luck with. Since I have burned 2 coasters any insight would be greatly appreciated. Thanks in advance for any advice and keep up the good work.

Thanks
Phil  

[sosotiit]

QUOTE

So I thought perhaps I should run through nme associator. So I do the whole thing again and same result. The only thing I notice on ssmerger is that the ssfile: is still red and the required ss file is blank along with the nme ss. So I'm wondering if somebody much smarter than I could shed some light onto what I might be missing or doing wrong. I am burning dual layer verbatim on pioneer 111d. This is of course the first one that I haven't have any luck with. Since I have burned 2 coasters any insight would be greatly appreciated. Thanks in advance for any advice and keep up the good work.

I will try,  but less familiar with Nme stuff   ,
I am assuming you have made backup for your nme before and that this one only is causing you problem

1) I would say since the other games work for you do it all with ss merger and then apply nme patch the same way as other game. or
2) Put everything together with ssmerger except the ss file, then use the merge tab in associator to insert the ss file in the image.

good luck
rgds,soso

[sosotiit]

put the ss in with ssmerger to get a file, then still use the merge tab in associator and force the ss again (instead of using the conver tab). Some people had to do that for all their nme game.

rgds,soso

[sosotiit]

you know what, nme images are functional in a Flashed Drive.

You need to know where is the problem, in the image or the NME patch.
Find a friend that has a working setup with flashed Drive. Bring your original and backup to test them on his X360.  It will tell you if the problem is the NME patch or the rest of the image.

hope it helps, rgds,soso

[Software2]

I'm still having problems with this game. Using an SH-D162C, I extracted the current partition with XBC, then the SS, PFI, & DMI. Then I merged it all with ssMerger. Using the stealth check feature on XBC it says "PFI Failed. Unknown Data."
I did this process with Star Trek Legacy without any problems. Why is it just that one sector fails?

[sosotiit]

yes and it is not a problem, what you extracted is probably good.
STL had the same, the video part was a different size, and the PFI is different than usual.
Not to worry
rgds,soso

[sosotiit]

In ssmerger say no  when it ask “Do you want to calculate… and verify online…” (not sure if the database even exist anymore, I never uses that).
It is not a problem if you have the two red fields at the bottom, I have never used the database (always got the two red fields) and it works.
It is not needed for the merge to be done correctly and we do not support the use of such database at XS.

When it says "... is xtreme ... lenght" that is good, click ok and continue

rgds,soso

[sosotiit]

you need to make the effort to go thru the doc describing these (pinned at the top Backup Faq - Everything* You Need To Know PLEASE READ BEFORE ASKING QUESTIONS! )

here is a tutorial using ssmerger. If I remember correctly after you selected all your files (and click ok on the lenght popup) you select at the bottom 'Pad with blank'  and deselect NME, and hit the big yellow 'merge and create' button.

you also look at this post.

rgds, soso

[sosotiit]

QUOTE

GOOD NEWS, there is a new version out,
no more problems with STL, Crackdown..
XBCreator 2.4

rgds,soso

[sethalooch]

I got a good working backup now.

I backed up the game again with my drive read speed set at 2x.  I still burned on memorex media because thats the only kind I had around at the moment, but its working just fine now.