Topic: Rainbow Six Vegas Backup Problem (Read 62 times)

sosotiit · « **on:** January 22, 2007, 07:27:00 AM »

see this post, it can vary by a few bytes, may have nothing to do with your prob with R6V.

What X360 drive you have/ FW?
Burner and speed?

rgds,soso

sosotiit · « **Reply #1 on:** January 22, 2007, 03:44:00 PM »

I would personally retry a burn.
You have a samsung so it should not be important but I would still make sure the booktype is dvdrom and layerbreak set properly at 1913760. IF you have another burner / media type it is a possible test.

If none of that resolve it, it may be the image, try to extract again but using my X360 drive since you have a samsung.

rgds ,soso

sosotiit · « **Reply #2 on:** February 15, 2007, 02:31:00 PM »

I would flash your samsung with the latest FW.

Also starting with 4.0 there are two reading speed for samsung, have you tried making sure it reads same speed as original.

Rgds,soso

sodiumba · « **Reply #3 on:** February 18, 2007, 08:01:00 PM »

just to add my piece i can inform you that it isn't a problem with all backups of Rainbow Six Vegas, mine has successfully passed those two levels without so much as a hiccup

Ripped With: Xbox Backup Creator
Burnt With: ImgBurn (via .dvd file)
XBox Drive: Samsung MS25
PC Burner: Liteon DVDRW LH-18A1H
Media: RiDisc (8x)
Burnt At: 2.4x

Regards,
SodiumBA

trip0d · « **Reply #4 on:** February 20, 2007, 04:49:00 PM »

I have just come across a problem with my backup for this game. Previously, it was working as i had just completed a few checkpoints. However, today when i try to play the game it loads pass the Unreal logo then goes into a loading screen (never getting to the main menu) - tells me that disc is unreadable.

I have check the disc there are no scratches or anything. Any suggestions?

used XBC to rip / ImgBurn to burn
pioneer 111D Verbatim disc at 2.4x.

sosotiit · « **Reply #5 on:** February 20, 2007, 04:56:00 PM »

which x360 drive / firmware.
how is the original playing

sosotiit · « **Reply #6 on:** February 20, 2007, 05:25:00 PM »

you have the right elements: XBC, pioneer, verbatim.
Tempted to say it is either:
1) only this game doing that and it was a bad burn. (would redo it)
2) af few games doing it, your drive does not have the highest sensibility.

rgds,soso

JTG88 · « **Reply #7 on:** February 21, 2007, 12:20:00 PM »

Try tweaking the laser a bit more, thats all the advice I can give, I'll have the game soon however.
Tweak the laser

chipD · « **Reply #8 on:** March 29, 2007, 08:46:00 AM »

Im having a problem with getting my backup of rainbow six vegas to boot.When i insert it into the 360 it goes black for a second as if its going to load, but then goes back to dash and says disc is unreadable try cleaning it.Ive made about 4 coasters so far,and am using same media and burner that i used for a few other games i backed up that play perfectly.(fujifilm-ritek and samsung SH-S183L)I read with fw 5.2 booktype isnt needed,but i did set it to DVD-ROM just to see if it made a difference but it didnt.Im using XBC 2.5 and IMGburn 2.2 and also tried CloneCD but same results.Also made sure i set the layer break.
I have a ms-25 with fw 5.2A.
Any help is appreciated,thanks

sosotiit · « **Reply #9 on:** March 29, 2007, 09:24:00 AM »

would try another media,

or it is the image How was it extracted (which drive to extract game and ss?)

rgds, soso

sosotiit · « **Reply #10 on:** March 30, 2007, 07:25:00 AM »

is your original playing fine?
I would definitely try it on verbatim.
if it does not resolve it, if you can try a different burner!!

Mine is working great so it can be backed up

rgds, soso

sosotiit · « **Reply #11 on:** March 30, 2007, 08:19:00 AM »

try Schtrom , run the stealth check of xbcr to see if all pieces are there.

rgds, soso

Author Topic: Rainbow Six Vegas Backup Problem (Read 62 times)