Print

[tnbigdawg]

Try out Xbox Backup Creator (XBC not to be confused with Xbox Connect) or try Schtrom360Xtract.

I don't know about Schtrom, but XBC has both create and burn image capabilities.

[rameysblackbelt]

does anyone know the instructions on using xbox back creator everytime i do this it doesnt work remember im new at 360   hepl pleaseeeeeeeee

[dre10g]

1. Put your xbox 360 game disk in the SH-D162C and wait for windows to recognize it. Then open up Xbox Backup Creator. click on the Drive Tools tab and click Unlock Drive.

2. Click on the Read tab and then click start. This will bring up a box asking you to name the file thats going to be created and to set the location to save it as well. Name it game.iso

3. 15 minutes later, when it is done, you will have two files. One called game.iso and another called game.dvd.

4. Make sure your blank dl dvd is in you dvd burner, then click the write tab and select your burner in the drop down and click on start. Navigate to the game.dvd file and open it.

Xbox Backup Creator should start burning the image after you select it.

[tnbigdawg]

QUOTE(dre10g @ Nov 16 2006, 07:34 PM)

1. Put your xbox 360 game disk in the SH-D162C and wait for windows to recognize it. Then open up Xbox Backup Creator. click on the Drive Tools tab and click Unlock Drive.

2. Click on the Read tab and then click start. This will bring up a box asking you to name the file thats going to be created and to set the location to save it as well. Name it game.iso

3. 15 minutes later, when it is done, you will have two files. One called game.iso and another called game.dvd.

4. Make sure your blank dl dvd is in you dvd burner, then click the write tab and select your burner in the drop down and click on start. Navigate to the game.dvd file and open it.

Xbox Backup Creator should start burning the image after you select it.

1. You could also use your 360 drive to create the image.

[iudigger]

Is clicking 'unlock drive' from the drive tool section 100% necessary?
I haven't seen this in any other guides

[cyberdork33]

QUOTE(iudigger @ Nov 17 2006, 08:58 AM)

Is clicking 'unlock drive' from the drive tool section 100% necessary?
I haven't seen this in any other guides

Actually, it is 0% necessary

[rameysblackbelt]

well look they are more to it then all this coz u still have the settings in the options  like drive specification and in the image tools says action extraxt / merge   xbox iso auto detect etc so see many oher steps left out every thime i do it never boots up om y pc  does it automaticly merge the ss and no need to do anything else waht file do i burn  
like i said if i use this never boots up for me but if i use clone swap method its gold  so where the book to taech us on this coz if not needed why they have it in the programs

[cyberdork33]

What drive are you using to make the backup?

XBC has a lot of tools. If you want to make a full backup of a game, you just need to put the game into one of the drives that it works with (see list of drives in the options tab), Click the "Start"Button on the "Read" tab. It will ask you where you want to save it. it will read and merge the SS, and create a .dvd file for the image. then all you have to do is burn it appropriately. Done.

The other tools on the other tabs are there if you need them for other things... Like the "Stealth Check" button.

This post has been edited by cyberdork33: Nov 17 2006, 07:14 PM

[rameysblackbelt]

i had my sammy 360 conected to it it detects it and does all u say but never boots the game when im done alll seems ok till i try to play it

[bigmac161]

I use a samsung dvd drive with modified firmware that you just put the original game in my dvd-rom drive and extract then burn with my dl writer bought the dvd-rom drive for £34.99

Brand New Samsung PC Drive XBOX DVD ROM Drive
Samsung DVD
(IMG:http://i9.tinypic.com/42wqbmw.jpg)

Key Features

    * Fully compatible with any XBOX 360 Disc
    * Reading multiple DVD formats (CD-R, CD-RW, DVD-R, DVD-RW & DVD-RAM) media
    * Samsung's DVD-ROM Drives also come with stabilised DVD playback and Dynamic Vibration Absorption
    * Windows plug and play


This post has been edited by bigmac161: Nov 17 2006, 08:19 PM

[flagg999]

I tried to make a backup of my PG3 disc using the above method.  Everything seemed to work fine and the DVD was created with no errors but when I try to play it in the Xbox 360 I get a message that says "to play this disc put it in a XBOX 360" and will not play the game. Any idea why I am getting this message?  I am using Verbatim media, which I understand are the best and a Sony DRU-710 burner.

ANy help is appreciated.

[manh]

QUOTE(bigmac161 @ Nov 17 2006, 01:46 PM)

I use a samsung dvd drive with modified firmware that you just put the original game in my dvd-rom drive and extract then burn with my dl writer bought the dvd-rom drive for £34.99

Brand New Samsung PC Drive XBOX DVD ROM Drive
Samsung DVD


Key Features

    * Fully compatible with any XBOX 360 Disc
    * Reading multiple DVD formats (CD-R, CD-RW, DVD-R, DVD-RW & DVD-RAM) media
    * Samsung's DVD-ROM Drives also come with stabilised DVD playback and Dynamic Vibration Absorption
    * Windows plug and play

whats the model number of that drive?

[bigmac161]

QUOTE(manh @ Nov 18 2006, 08:01 AM)

whats the model number of that drive?

Samsung SH-D162C i think  (IMG:style_emoticons/default/wink.gif)

[rameysblackbelt]

if i find this drive how do i flash it so it will read the xbox 360 dvd and what is the firmware i need to use for it

[bigmac161]

QUOTE(rameysblackbelt @ Nov 18 2006, 01:10 PM)

if i find this drive how do i flash it so it will read the xbox 360 dvd and what is the firmware i need to use for it

http://forums.xbox-scene.com/index.php?showtopic=552600

 (IMG:style_emoticons/default/rolleyes.gif)