Topic: Samsung Sh D-162c Not Extracting W/kreon 0.81 (Read 86 times)

sdang · « **on:** November 06, 2006, 05:34:00 PM »

you need to set your SH-D162C as master

fill the security sector with zeros then retry.

hope this helps.

justicedreadz · « **Reply #1 on:** November 08, 2006, 11:51:00 AM »

I got it figured out. Fortunately all I had to was put the burner on master and the drive on cable select. Worked great.

ligiz · « **Reply #2 on:** November 12, 2006, 10:13:00 PM »

you mean put the d-162c as the master and your burner as slave, correct?

bigmac161 · « **Reply #3 on:** November 30, 2006, 10:01:00 AM »

QUOTE(justicedreadz @ Nov 8 2006, 06:58 PM)

I got it figured out. Fortunately all I had to was put the burner on master and the drive on cable select. Worked great.

QUOTE(ligiz @ Nov 13 2006, 05:20 AM)

you mean put the d-162c as the master and your burner as slave, correct?

I had the same problems so instead of putting my SHD-162C as master i put it as CS (cable select) works fine not sure if its the right thing to do but it seems to work ok

champ91 · « **Reply #4 on:** December 01, 2006, 02:24:00 AM »

it's different for everyone. but generally people have reported that setting the samsung to master works.

ILLusions0fGrander · « **Reply #5 on:** December 01, 2006, 09:17:00 AM »

my 111d is set to master, and ive never had a prblem with my 162 as slave, however ive seen it help a few people setting the 162 as master, if you are having probs.

Author Topic: Samsung Sh D-162c Not Extracting W/kreon 0.81 (Read 86 times)