xboxscene.org forums

Author Topic: Clonecd  (Read 70 times)

Spodie

  • Archived User
  • Jr. Member
  • *
  • Posts: 53
Clonecd
« on: September 18, 2006, 02:53:00 AM »
Info on Image File:
Sectors: 3697696
LayerBreak: 1913760

Once I click next, I see all the info on the burner but I get this message: "Waiting for Pioneer DVD-RW DVR 111D..."

I have been waiting awhile.  sleeping.gif

I googled this & found others have had this problem but didn't find a solution. I am still using the stock 1.19 FW.
Logged

jesterrace777

  • Archived User
  • Hero Member
  • *
  • Posts: 3253
Clonecd
« Reply #1 on: September 18, 2006, 08:12:00 AM »
I would definitely update your firmware.  If nothing else the latest firmwares have improved write strategies for a wider variety of media.  Also have you tried Image Burn or DVD Decrypter?
Logged

Spodie

  • Archived User
  • Jr. Member
  • *
  • Posts: 53
Clonecd
« Reply #2 on: September 19, 2006, 02:57:00 AM »
Firmware was updated to Dangerous Brothers but no go.

Imgburn & DVD Decrypter give me an "Incompatible Medium Installed" error but since clonecd's problem has nothing to do with my media (verbatim +R DLs), I am thinking it is the drive.
Logged

jesterrace777

  • Archived User
  • Hero Member
  • *
  • Posts: 3253
Clonecd
« Reply #3 on: September 19, 2006, 10:50:00 AM »
That's odd for a 111D, did you check the jumper settings?
Logged

metal_hed

  • Archived User
  • Newbie
  • *
  • Posts: 15
Clonecd
« Reply #4 on: September 20, 2006, 12:57:00 PM »
i also noticed on my 111 that if u dont put a blank dvd in b4 that stage it hangs there too
Logged

thelipstickdevice

  • Archived User
  • Newbie
  • *
  • Posts: 21
Clonecd
« Reply #5 on: September 20, 2006, 01:23:00 PM »
does it read any of your discs at all or is it only when you try burning
Logged

Spodie

  • Archived User
  • Jr. Member
  • *
  • Posts: 53
Clonecd
« Reply #6 on: September 20, 2006, 10:32:00 PM »
QUOTE(jesterrace777 @ Sep 19 2006, 05:57 PM) View Post

That's odd for a 111D, did you check the jumper settings?


Well....The jumper was on cable select, now on master. No other drives on the ribbon as the hard drive is sata. Reader light no longer comes on when disk is inserted. Uninstalled & reinstalled. DMA settings also correct.

e55exb0y: 80 wire

metal_hed: Tried inserting media way before but  sad.gif

thelipstickdevice: I get tons of "Failure to read sector ####" in the log screen.


As far imgburn & dvddecrypter go, I have ruled out bad media as the problem. I tested a dvd that came from a batch I know to be good & still seen as incompatible. I already have my RMA from Newegg & will post my glorious success next week hopefully. Thanks for the suggestions!



Logged