Print

[TapaTurma]

Samsung ms25 with xtreme 33

burners used:
NEC (model unknown)
PHILIPS external usb burner (SPD3000CC)

Media used:
Maxell DVD+R DL
Memorex DVD+R DL

Burning APP = clonecd


Burned 3 games so far. Every single one worked superb.

0 Coasters

[heatwave30]

Working setup:
DVD firmware/modchip: NME-360 for Samsung Xbox360 DVD-drive
Burner: Plextor 716AL with default factory firmware
App: ImgBurn (Booktype DVD+R DL with NORMAL setting and set Layerbreak to 1913760)
Media: Imation DVD+R DL
Speed: 2.4x
Game: Ridge Racer 6 OK!, (just starting)

This post has been edited by heatwave30: Sep 21 2006, 07:34 PM

[tinytimie18]

Xbox 360 Drive: TS-H943 ms25 with  FW Xtreme 3.3
Burner: Pioneer 111D with FW 1.19
App: Clone CD
Media: Verbatim DVD+R DL
Speed 2.4
Games: 4
Coasters 2 wxripper way

This post has been edited by tinytimie18: Sep 21 2006, 11:07 PM

[dokworm]

360 DVD = Samsung Ms25 w/Xtreme 3.3
PC DVD = Samsung SH-D126C with Kreon 0.8
App = Xbox backup creator
PC Burner =LG GSA H10a
Media = Verbatim 2.4x DVD+R DL
Burnin App = DVD Decrypter - set media type to DVD-ROM set manual layer break and burn the ISO

12 games no coasters. DVDDecrypter is free and easy and just works.


This post has been edited by dokworm: Sep 22 2006, 05:52 AM

[d-range]

360 DVD = Samsung Ms28 w/Xtreme 3.3
PC Burner = Matshita/Panasonic DVD-R UJ-846 (Apple iMac core duo internal DVD writer)
App = CloneCD (No bitsetting needed, LayerBreak 1913760, speed 1x)
Media = Verbatim 2.4x DVD+R DL

Burned with CloneCD using Boot Camp. Works like a charm in slow & fast speed, and the drive even seems to make less noise and load faster in slow mode with the Verbatim media than with my other discs (TraxData).

This post has been edited by d-range: Sep 23 2006, 06:43 PM

[xadox]

360 DVD = Samsung w/Xtreme 3.3
PC Burner = LG GSA-4167
PC DVD = Samsung 162C w/Kreon V0.80
App = XboXBackupCreator (for Reading from 162C) / IMGburn (for Burning)
Media = Ricoh 2.4x Printable
Burn Speed = 2.4

12 Backups are working like a charm.

[bizee]

BURNER: NEC ND-3550A
MEDIA: GQ (Fry's Brand) DL
CHIPSET: VIA 6421L(RAID-Newegg has the non raids on 3 weeks wait, i paid the extra 5 bucks) PCI SATA CARD
F/W: Xtreme 3.0
DVD Drive: TS1493 (was MS28, biggest pain in the ass to flash)

I didnt think the fry's brand would work with these games but it works perfectly fine.  No coasters yet.  

I did have problems with the via card freezing up my computer everytime i'd turn on the computer and the 360.  Uninstalled the raid utility, once I did that.  I was able to see the drive in windows no problem

Used DVDINFO pro to extract .bin files.  Unlock code didn't work for dead rising but ISO buster detected the game data so I didn't have to worry about that.  Ripped and burned at 2.4x.

All works great.  

I see everyone is using 3.3, any problems with it?  I'm thinking about flashing mine from 3.0 to 3.3

This post has been edited by bizee: Sep 28 2006, 10:13 PM

[Penfoldian]

BURNER: PIONEER 111D
MEDIA: INTENSO DOUBLE LAYER 2.4X
SOFT: CLONECD
CHIPSET: VIA 6421/8237
DVD Drive: HITACHI

ONLY GET COASTERS WHEN I STRESS OUT THE PC TO MUCH.

[Bluenose]

Drive: Ms25 flashed with x33
Mobo:Abit an8 sli n4 chipset
Burner:Pioneer 110d dangerous brothers 1.22 fw
App: Clone CD
Media: Verbatim 2.4x DVD+R DL
Method: ISO buster and build360
Speed: 2.4x
Game: cod2 pal, oblivion pal
Coasters:0  

[jabroniekilla]

360 drive:Ms25 w/Xtrm33
Burner:Pioneer 111D w/dangerous bros 1.29 fw
App:IsoBuster to rip, XBC to get SS, CloneCD to burn
Media:Verbs +R DL
Results: Just Cause

Coasters:Only when I used my HP 640c burner.

[masterg57]

Is there anybody how can tell me? Can I use Philips dvd's?

Thanx

[connah]

OK I can at last say that my setup works, just make sure you have everything set to DMA or yoy will get write speeds of about 0.3x - 0.6x, means about 4hours to burn  (IMG:style_emoticons/default/muhaha.gif)


360 DVD : Samsung with Xtreme 4.2b firmware

PC Burner : Plextor PX-760a

PC DVD : Samsung SH-162C w/Kreon V0.81 Firmware

App : XboXBackupCreator 2.3 for reading and burning

Media : Verbatim DVD+R DL 2.4x - 6x

Burn Speed : 2.4x

Backups working : Table Tennis, Tiger Woods PGA Tour 07 and Lego Star Wars 2

Coasters : None yet

This post has been edited by connah: Nov 7 2006, 09:51 PM

[leeb1977]

Burner = NEC 3540 (latest retail firmware)
Media = Traxdata 2.4, Ritek 8x, Aone 2.4x
Program = Clone CD
Games = Gun, Smackdown 2007, Moto GP 2006

working = YES 100%

[NumpXP]

360 DVD : Samsung with Xtreme 4.2a firmware

PC Burner : Pioneer 111D (laster FW (1.19 i think)

App : ImgBurn (newest version dloaded  in October)

Media : Verbatim DVD+R DL 2.4x - 6x

Burn Speed : 2.4x - 8x (mostly used 8x)

Backups working :
Gears of War
Call of Duty 3
F.E.A.R.
Tony Hawk's Project 8
Need for Speed Carbon
Tom Clancy's Splinter Cell Double Agent
Marvel: Ultimate Alliance
FIFA 07
Tom Clancy's Ghost Recon Advanced Warfighter
Chromehounds
Ninety-Nine Nights
Need for Speed Most Wanted

Coasters : all the coasters failed due to the problem with my windows media center . other successful backups were burned under Vista RC2

This post has been edited by NumpXP: Nov 18 2006, 05:55 AM

[champ91]

I think rather than having only what setup you got you should also include ALL configurations. People are having problems with identical parts is because their configuration is differnt. I know first hand because i was having tons of problems so I will be the first to share my configuration.

First the parts:

SH-D162C w/ kreon v.81
Pioneer DVR-111D
Programs I used XBC, and the iso builder method
Mobo: Gigabyte DS3 board, with only 1 IDE (very important)

Second is the configuration:
Initally what I did was use my Pioneer Burner and Hard DRive on the IDE cable. HD being master and Burner being slave. That burned games fine. No errors.

After, i decided to install my Sh-D162c drive in my pc so I took off the HD, put in a sata drive instead and put the samsung dvd rom as the IDE Master. -ALL HELL BROKE LOOSE AND MADE 5 COASTERS AFTER VARIOUS TESTS-

So what happened then,
I left the pioneer drive on the IDE cable, made the samsung SH-d162c as an external DVD ROM with an adapter and everything was okay again.

So in conclusion, if you are experiencing problems, my solution was this, the DVD-ROM and DVD writer has to have it's own IDE cable or connection, they cannot share one. or else you will get errors out the @$$.

This may not fix all the problems but should certain help some people.