Topic: Tutorial: Using Imgburn/dvd Decrypter To Burn Backups (Read 1993 times)

sosotiit · « **Reply #105 on:** January 16, 2007, 12:14:00 PM »

after you set the layerbreak at 1913760,
when you choose the file you must take the .iso or .000 file not the .dvd file.

no 100% promise it will resolve it. It did for some people.

rgds,soso

dbldown768 · « **Reply #106 on:** January 16, 2007, 02:06:00 PM »

QUOTE(sosotiit @ Jan 16 2007, 01:21 PM)

after you set the layerbreak at 1913760,
when you choose the file you must take the .iso or .000 file not the .dvd file.

no 100% promise it will resolve it. It did for some people.

rgds,soso

Im not so sure you need to take the .iso or .000 file. I noticed that when i took the .dvd file before it would use the layerbreak information stored in that file. I then added the user configuration of a layer break in Imgburn's options, and no matter if i use the .dvd file or not, in the log you will see a line saying it is using the user's specified layer break that you entered in the options.

sosotiit · « **Reply #107 on:** January 16, 2007, 02:17:00 PM »

@dbldown768,
agreed it should not make a difference.
For strange reason, for some people it seems to work better like that.
Not that I know why

rgds,soso

smhassan · « **Reply #108 on:** January 16, 2007, 02:47:00 PM »

wat do u mean take the .ooo file... in image burn is that even selectable?

sosotiit · « **Reply #109 on:** January 16, 2007, 03:00:00 PM »

in the original post of vince_V in step 4 when he choose the file to burn, he says to take the .000 file.

in fact depending on how you extracted the file you will have a .dvd file and
either a .000 file or a .iso file.

select the .iso or the .000 depending of which you have.
HOw was it extracted anyway, we can tell which file you will have from that.

thks, soso

smhassan · « **Reply #110 on:** January 16, 2007, 06:49:00 PM »

QUOTE(sosotiit @ Jan 16 2007, 05:07 PM)

in the original post of vince_V in step 4 when he choose the file to burn, he says to take the .000 file.

in fact depending on how you extracted the file you will have a .dvd file and
either a .000 file or a .iso file.

select the .iso or the .000 depending of which you have.
HOw was it extracted anyway, we can tell which file you will have from that.

thks, soso

thanks man i see what i did wrong i selected the .dvd file

bobobo · « **Reply #111 on:** January 22, 2007, 02:51:00 AM »

I have just ordered the Pioneer 111D to burn DL, but can I use this drive to backup games?

This post has been edited by bobobo: Jan 22 2007, 10:52 AM

sosotiit · « **Reply #112 on:** January 22, 2007, 07:01:00 AM »

Plse take the time (IMG:style_emoticons/default/wink.gif) to explorer the pinned section at the top of the forum .

I will also direct you to the following sections.
You will find a very good overview document here

Firmware and flashing your firmware is here ( look at the Releases, Tuturial And Guides at the top and read a lot).

Doing backup of your games in this section Backup Faq - Everything* You Need To Know PLEASE READ BEFORE ASKING QUESTIONS! (again the read all you can in Back Up Faq at the top)

Also look at the newbie section for most of the questions we all have when we begin (IMG:style_emoticons/default/wink.gif).

Yes the pioneer can be used for wxripper, but you still need to connect your X360 drive to your PC to extract the ss.bin.

rgds,soso

Nex-Necis · « **Reply #113 on:** February 03, 2007, 02:10:00 AM »

Ok... i tried this tut 3 times now and I keep getting the same message:

"To play this disk, put it in an Xbox 360 console"

I am using a Sony DRU-830A with Verbatim DVD+R DL (fw SS23), IMGBURN V2.1.0.0 BookType Setting in imgburn under Samsung DVD+R DL to DVD-ROM, (Also Tried Booktype in Nero to DVD-ROM) Layer break 1913760. I used DVD info on the burnt disks, I dunno what the firmware is on my 360, my buddy flashed it for me... can any one help... I dont want any more coasters!

IMG BURN LOG:
I 01:06:20 ImgBurn Version 2.1.0.0 started!
I 01:06:20 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)
I 01:06:20 Initialising SPTI...
I 01:06:20 Searching for SCSI / ATAPI devices...
I 01:06:26 Found 1 DVD±RW/RAM!
I 01:40:04 Operation Started!
I 01:40:04 Source File: X:\XBOX 360\Test Drive Unlimited\IMAGE1.000
I 01:40:04 Source File Sectors: 3,697,696 (MODE1/2048)
I 01:40:04 Source File Size: 7,572,881,408 bytes
I 01:40:04 Source File Volume Identifier: XBOX360
I 01:40:04 Source File Implementation Identifier: Daikin U.S. Comtec Lab
I 01:40:04 Source File File System(s): ISO9660, UDF (1.02)
I 01:40:04 Destination Device: [0:1:0] SONY DVD RW DRU-830A SS23 (E:) (ATA)
I 01:40:04 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x)
I 01:40:04 Destination Media Sectors: 4,173,824
I 01:40:04 Write Mode: DVD
I 01:40:04 Write Type: DAO
I 01:40:04 Write Speed: 4x
I 01:40:04 Link Size: Auto
I 01:40:04 Test Mode: No
I 01:40:04 BURN-Proof: Enabled
I 01:40:05 User Specified L0 Data Zone Capacity: 1,913,760
I 01:40:36 Filling Buffer...
I 01:40:37 Writing LeadIn...
I 01:40:39 Writing Image...
I 01:40:39 Writing Layer 0... (LBA: 0 - 1913759)
I 01:59:53 Writing Layer 1... (LBA: 1913760 - 3697695)
I 02:17:52 Synchronising Cache...
I 02:17:54 Closing Track...
I 02:17:56 Finalising Disc...
I 02:20:09 Image MD5: 5668dda7eff5baea0ca105543e136d82
I 02:20:09 Operation Successfully Completed! - Duration: 00:40:04
I 02:20:09 Average Write Rate: 3,313 KB/s (2.4x) - Maximum Write Rate: 3,440 KB/s (2.5x)

DVDINFOPRO:

Media Information
Disc Regions are 1,2,3,4,5,6,7,8
CSS Protected No
Media code/Manufacturer ID MKM 001
Media code/Manufacturer ID MKM 001
UDF Format Type V1.02
UDF Volume Name XBOX360
UDF Application id
UDF Implementation id Daikin U.S. Comtec Lab
UDF Recording Date/Time (mm/dd/yyyy) 10/ 7/2005 12:18:46
Format Capacity 7.05GB(7.57GB)
Book Type DVD-ROM
Media Type DVD+R DL
Data area starting sector 30000h
Data area end sector 386C1Fh
Layer 0 end sector 20339Fh
Linear Density 0.293um/bit
Track Density 0.74um/track
Number of Layers 2
Layer Track Path direction (OTP) Opposite track path

Complete Media Code
00000000 08 02 00 00 01 0F 32 10 00 03 00 00 00 FB 04 DF ......2.........
00000010 00 20 33 9F 00 00 00 4D 4B 4D 00 00 00 00 00 30 . 3....MKM.....0
00000020 30 31 00 40 25 25 37 0C 02 2F 63 02 2F 63 21 23 01.@%%7../c./c!#
00000030 0D 0E 14 14 02 01 01 10 00 21 23 0D 0E 14 14 02 .........!#.....

sosotiit · « **Reply #114 on:** February 03, 2007, 08:06:00 AM »

Looks pretty good,
1) which x360drive model /FW (Is the firmware recent)?

2) Could be that your x360 drive does not see the ss and that it is image related.

How have you done the backup?
-for ss.bin which software & drive
-for game.iso which software & drive
-how was it merged

3) Look at the Rules on signatures (4 lines max plse correct it)

QUOTE

Signatures have the following limitations/restrictions:
· Max 4 lines of text (as viewed on an 800x600 display)

rgds, soso

This post has been edited by sosotiit: Feb 3 2007, 04:19 PM

Sweeet · « **Reply #115 on:** February 27, 2007, 04:26:00 PM »

Hello, I have the latest version 2.2 and there is an option to finalize disc. As this option is in the tutorial I'm not sure whther its meant to be checked. Should I just leave it the way it is (checked)?

This post has been edited by Sweeet: Feb 28 2007, 12:27 AM

Sweeet · « **Reply #116 on:** February 28, 2007, 06:02:00 AM »

Just received my 360 back and it worked so I guess so!

rahduke · « **Reply #117 on:** March 01, 2007, 02:48:00 PM »

I'm having a problem in IMGburn, I'm using a Write-master m182D DVD drive and Richoh dual layer discs... I burnt a couple discs without changing the layer break option and ended up with coasters.... After i changed the layer break sectors in L0 to 1913760 as per the guide i get this horrible error msg when i try to burn

Device IO Control (FSCTL_LOCK_VOLUME) Failed!
Device: [0:1:0] TsstCorp CD/DVDW SH-S182D SBO4 (E:) (ATA)

Unable To lock Volume for exclusive Access

Reason: Access Denied

Whats that about? please help me out i been tryin to test my newly modded 360 w/ this backup all day

If it makes any difference the backup is in .iso format e.g. backup.iso

rahduke · « **Reply #118 on:** March 01, 2007, 03:23:00 PM »

as an addendum to my above reply, it gives me the option to continue to burn in IMG Burn after i get this
W 17:31:09 DeviceIoControl(FSCTL_LOCK_VOLUME) Failed! - Reason: Access is denied.
and when the disc is burnt i still get the error on the xbox

To PLay disc put in Xbox 360

I'm running the Xtreme 5.2 firmware and i flashed using X360Sam and the MTK flash Method I have a HT943 Drive version ms28

Juha1976 · « **Reply #119 on:** March 02, 2007, 05:19:00 AM »

What is wrong.. I tried to burn backup of my xbox360 game Call of Duty 3. I did everthing just like the first post of this topic except I have ImgBurn 2.2.

I tried two different media. Maxell DVD+R DL and RiDisc DVD+R DL BitSetting to DVD-ROM at ImgBurn settings.

My burner is LG GSA-4167B with latest official DL13 firmware

Burn process was 100% succesfull, but when I put newly burned DVD on my console, there was error message on tv "Disc not regognised".. same error with both media..

My little brother have a much older DVD-DL burner.. Maybe the first burners ever.. Some model of Liteon Burner.. He got working buckup with that burner on the same Maxell DL media which I tried to burn with my LG burner with no luck.

So what did I do wrong..?

Author Topic: Tutorial: Using Imgburn/dvd Decrypter To Burn Backups (Read 1993 times)