Topic: Tutorial: Using Imgburn/dvd Decrypter To Burn Backups (Read 1993 times)

wbj.nightmare · « **Reply #90 on:** December 30, 2006, 05:32:00 PM »

Hi!

I have a big problem.

I tried to do what you say, but the program says me that it can´t use layer break with a DL media and DAO write type.... something like that. I tried to continue whatever... but now my Xbox is recognizing the game as a normal DVD-ROM.. then a small movie says me: "You need to run this DVD on a Xbox".

Can i do something to make it works? If possible.. with this DL that i burn... can I?

I explain.. here in Brazil this type of DVD is very expensive...
I paid something like US$ 5,9 dollars here... =/

Thanks a lot!

rdatdude · « **Reply #91 on:** January 04, 2007, 11:38:00 PM »

im getting very tierd of using clonecd because i continue to get unplayable disc error in my xbox, SO i want to use imgburn. So with the new version i don't have to set the layer breaks? i can just browse for the img and burn right, without using the dvd file?? Thanks for any help you can offer guys.

rdatdude · « **Reply #92 on:** January 05, 2007, 09:45:00 AM »

Ok im tierd of using Clonecd, and i wanna use imgburn. i have the dvdfile and img file. In imgburn which one do i burn? I've heard with the new imgburn you don't have to set the layer break, is this true? Also i haven't burned one yet but when i load the dvdfile it shows the size of 7,------ and when i load the img file for burn it shows the same size, so im just trying to figure out which to burn? thanks guys

srath · « **Reply #93 on:** January 05, 2007, 11:05:00 AM »

I would set it just like the pictures above show. Then just load your iso file. Thats what I have been doing and it works flawless. Make sure booktype is set to DVD-ROM and burn at 4X.

sosotiit · « **Reply #94 on:** January 05, 2007, 08:13:00 PM »

yes image above or this tutorial.
rgds,soso

Pikeyp · « **Reply #95 on:** January 09, 2007, 07:23:00 AM »

Hi all,
I need your help....

I am getting the following message when trying to burn backup using DVD+R DL media (Verbatim)
I have set the booktype to DVD-ROM using the liteon tab...(There isn't one for SONY) and this is the only one that seemed to give me the option to change it.

DeviceIoControl(FSCTL_LOCK_VOLUME)Failed!
Device:[5:0:0]SONY DVD RW DW-D22A BYS3 (E:)(ATA)
Unable to lock volume for exclusive access.

Reason:Access is denied.

Your help would be greatly appreciated....
Many thanks in advance....

jesterrace777 · « **Reply #96 on:** January 10, 2007, 03:30:00 AM »

You may need to reflash your Sony drive with one of the Lite-On booktype setting firmwares (This is of course assuming that your particular model happens to be a Sony and not a Benq, which some Sony models are).

sosotiit · « **Reply #97 on:** January 10, 2007, 05:57:00 AM »

to add to jester comment,
I believe it is a liteon 1633 capable of DL at 2.4X with liteon fw.
You need to do some homework (IMG:style_emoticons/default/wink.gif) here before you crossflash your drive.

rgds,soso

This post has been edited by sosotiit: Jan 10 2007, 01:58 PM

Juffe · « **Reply #98 on:** January 10, 2007, 10:36:00 AM »

Hello, i had the rotten luck that when i bought my computer it had a DVD rw dl - only burner installed.

was just wondering is it possible to make imgburner burn a backup of a xbox 360 game on a DVD-r DL disc.

Iwe tried several times. where i got the msg's that the sector was wrong for a - disc, then i tried to turn on

layer jump recorder, then it burnt like 20% and made an I/o error

This post has been edited by Juffe: Jan 10 2007, 06:42 PM

jesterrace777 · « **Reply #99 on:** January 10, 2007, 02:53:00 PM »

Much easier to replace your burner than to try to get D/L DVD-R to work. I believe with the latest firmware that the 360 Samsung drives can read D/L DVD-R but there is a little bit of an extra process to get it to work right. No chance on the Hitachi drives I'm afraid.

Juffe · « **Reply #100 on:** January 10, 2007, 10:52:00 PM »

well crap i actually also got a hitachi drive in my xbox.

i got a cd burnt without errors last nite, but when i put it in my 360 it just said. to play this game you have to put it in a xbox 360, well duh

Juffe · « **Reply #101 on:** January 10, 2007, 11:32:00 PM »

Forgot to mention that i burnt a ntsc version of the game and im running on a pal system, dunno if thats why my game got corrupted.

I am still going to try and get the DVD dl - r discs to work on hitachi it has to be possible

jesterrace777 · « **Reply #102 on:** January 11, 2007, 02:34:00 AM »

You are wasting your time as the only reason why it works with the Sammy is due to a recent firmware update. So unless you know how to program firmware it isn't going to happen. As for PAL/NTSC compatibility it isn't like the original XBOX, only certain games will work on both format systems on the 360. Here is the best compatibility list that I have found.

http://www.egamia.co..._Xbox_360_Games

sosotiit · « **Reply #103 on:** January 11, 2007, 03:02:00 PM »

@konartist911

Created a topic for your issue, it was not specific to imgburn anymore.

rgds,soso

smhassan · « **Reply #104 on:** January 16, 2007, 11:56:00 AM »

When i tried to do this tutorial it gave me this error

http://img529.images...97/errorov8.jpg

and also when i hit try again or continue it said this

http://img165.images...8/error2um4.jpg

any help would be greatly appreciated

sry but im in a rush ... i wuda read but dont got time at the moment

Author Topic: Tutorial: Using Imgburn/dvd Decrypter To Burn Backups (Read 1993 times)