xboxscene.org forums

Author Topic: E74 After Soldering On Av Slot?  (Read 38 times)

cawcaw101

  • Archived User
  • Newbie
  • *
  • Posts: 7
E74 After Soldering On Av Slot?
« on: April 15, 2008, 12:52:00 PM »
How can i fix this error?

I soldered on the back of the mobo where the AV slot is, and made the mistake of just ripping the solder off rather then desoldering.

It has some black areas and its a little melted too.

How can i fix this?

Dont say towel trick, blow dryer, or anything like that, i want a permement fix or no fix at all...

If this cant be fixed also tell me so i can just sell it on ebay...
Logged

Wilhelm_I

  • Archived User
  • Hero Member
  • *
  • Posts: 937
E74 After Soldering On Av Slot?
« Reply #1 on: April 15, 2008, 02:28:00 PM »
You either shorted something in the AV-port out or a pin of it isnt making good contact.
Or you bended the board and caused a trace between the ana-chip and gpu to break
This will fix the problem http://forums.xbox-scene.com/index.php?showtopic=646900

This post has been edited by Wilhelm_I: Apr 15 2008, 09:28 PM
Logged

scuba156

  • Archived User
  • Hero Member
  • *
  • Posts: 1217
E74 After Soldering On Av Slot?
« Reply #2 on: April 17, 2008, 07:07:00 AM »
i would say its the damage you cause on the AV port. E74 can be cause by anything between the Av port and the GPU. i suggest you post a picture of the damage.

next time, you should be more careful
Logged