xboxscene.org forums

Author Topic: Is This Possible?  (Read 123 times)

davinator456

  • Archived User
  • Full Member
  • *
  • Posts: 171
Is This Possible?
« on: June 19, 2006, 09:08:00 PM »
im lost. why would you want to do all this?  either hook it up through component, or through vga, none of this hocus pocus will make the picture any better then it can be?  mebbe im wrong but i dont see this helping any...
Logged

paranoia4422

  • Archived User
  • Full Member
  • *
  • Posts: 160
Is This Possible?
« Reply #1 on: June 19, 2006, 10:00:00 PM »
QUOTE(davinator456 @ Jun 20 2006, 04:15 AM) View Post

im lost. why would you want to do all this?  either hook it up through component, or through vga, none of this hocus pocus will make the picture any better then it can be?  mebbe im wrong but i dont see this helping any...

Either i get component out@480p for DVDs(my tv's upscaler is horrible with 480p->1080i), or component out@720p tricking the 360 to thinking its outputting through VGA, upscaling my movies(my tv can make a very good picture with this signal)

TV doesn't have VGA, it has 2xcomponent and a HDMI port.(then like 1 composite and then 2 composite w/svideo)

Otherwise im just looking into a 25ft DVI->HDMI cable to run from my pc to my tv and then setting up a custom powerstrip resolution profile to run 1080i to watch dvd's now($10 for the cable from monoprice, $20 dvd drive off of newegg.....or i could salvage the dvd drive from the broken down dell downstairs)
Logged

Theta

  • Archived User
  • Newbie
  • *
  • Posts: 11
Is This Possible?
« Reply #2 on: June 20, 2006, 12:31:00 AM »
I'm with you on this!!!

I have the VGA adapter and the Component cables... BUT...

My projection LCD cuts off the right side of the screen when using the VGA cables. NO fix, other than 1024x768, which doesn't look great.

I was thinking about using the VGA cable, then a gender changer, than a VGA to component set of cables.

You're not alone in this!!!
Logged

Foe-hammer

  • Archived User
  • Hero Member
  • *
  • Posts: 2288
Is This Possible?
« Reply #3 on: June 20, 2006, 01:57:00 AM »
Buy the cheap ass vga to component cable then, and tell us how it works.  The only problem i see is vga uses RGB levels, whereas component does not.  So that being said, it will probably not work but who knows?
Logged

twistedsymphony

  • Recovered User
  • Hero Member
  • *
  • Posts: 6955
Is This Possible?
« Reply #4 on: June 20, 2006, 07:35:00 AM »
QUOTE(Theta @ Jun 20 2006, 02:38 AM) View Post
I was thinking about using the VGA cable, then a gender changer, than a VGA to component set of cables.
QUOTE(Foe-hammer @ Jun 20 2006, 04:04 AM) View Post
Buy the cheap ass vga to component cable then, and tell us how it works.  The only problem i see is vga uses RGB levels, whereas component does not.  So that being said, it will probably not work but who knows?


Wont work, those cables are specifically made for projectors that can accept component video but do not offer component video ports (space and cost savings) it's just utilizing the vga port for something it's not really meant for.

Component video includes a composite sync signal on the Green cable along with the black and white image. Color information is carried along the Red and Blue cables in a compressed/matrixed format.

Just because the cables are red green and blue does not mean they are actually carrying red green and blue color information. If it was an RGB signal with sync on green it might work... but Component is completely different. While RGB has a lot in common with VGA... Component video is actually closer to S-Video, essentialy it's S-Video with a bit more color separation and a higher bandwidth for higher resolutions. The colorspace is completely different.

Converting between the two is a simple process though involving some video quality op-amps. I was actually going to build a industrial grade VGA/RGB to component converter but there were a lot of people who really wanted to see the Saturn controller converter happen so I started that project instead.

Here's some info to get your started Converting VGA is pretty much the same process as converting VGA. You just have to be conscience as to if the circuit will work with resolutions above 480p
http://nfggames.com/...?showtopic=2026

http://www.keohi.com...transcoder.html (<-works with 480p and 720p)

you can build one for <$20 but buying a unit to do it can cost upward of $200... that's some markup for you

I was planning on building a couple of these so I could use my Sega Saturn and Sega Dreamcast (neither of which support component video but DO support RGB or VGA) on my projector through my component video switch.
Logged

Lpk32187

  • Archived User
  • Full Member
  • *
  • Posts: 168
Is This Possible?
« Reply #5 on: June 20, 2006, 08:28:00 AM »
Your tv has HDMI but not VGA? Im sure theres hdmi to vga convertors out there.
Logged

VinnySem

  • Archived User
  • Full Member
  • *
  • Posts: 153
Is This Possible?
« Reply #6 on: June 20, 2006, 09:07:00 AM »
How about piggy-backing a VGA-to-DVI converter with a DVI-to-HDMI converter?

I don't know what kind of signal loss you'd get going through 2 converters...

Logged

twistedsymphony

  • Recovered User
  • Hero Member
  • *
  • Posts: 6955
Is This Possible?
« Reply #7 on: June 20, 2006, 03:36:00 PM »
QUOTE(paranoia4422 @ Jun 20 2006, 01:06 PM) View Post

Still could you not jump the VGA jumpers then try to see what happens to the component video.....

VGA uses the same pins as Component, switching the jumper to VGA would make the Component signals dissapear completely.
Logged

paranoia4422

  • Archived User
  • Full Member
  • *
  • Posts: 160
Is This Possible?
« Reply #8 on: June 20, 2006, 04:11:00 PM »
QUOTE(twistedsymphony @ Jun 20 2006, 10:43 PM) View Post

VGA uses the same pins as Component, switching the jumper to VGA would make the Component signals dissapear completely.

Thanks for clearing that up, i couldn't find component pinouts online
Logged