Topic: Xbmc Screwed My Xbox! (Read 45 times)

xPhRoZeNx · « **on:** February 22, 2004, 05:32:00 PM »

I was using XBMC (xbox media center) and in one of the menues on the lower left there were three colored small balls red green and orange i think i clicked on the red one and my xbox shut off! after that i went to restart it and all my xbox did was load the bios and shutoff over and over never stopping. I erased the HD and started over, and it still just restarts with the newest ver of evox, the same on i used earlier and worked fine. now it wont play games, dvd's any hombrew, any apps, or the msdash.....

Any ideas? I would be really greatfull for the help i have searched everywhere online and i see no one with the same problem....
Thanx!

This post has been edited by xPhRoZeNx: Feb 23 2004, 02:03 AM <

Mike117 · « **Reply #1 on:** February 22, 2004, 06:03:00 PM »

I have the same thing where my 'box only reboots over and over again. I just turn it off and pick a side up about 5 inches off the ground and drop it and turn it on and it works. I just think I have a bad solder connection in mine. You should check that out just in case too. <

xPhRoZeNx · « **Reply #2 on:** February 22, 2004, 06:04:00 PM »

Yeah i will check that, but i seriously doupt it cause i never moved my box it just stopped working after XBMC turned it off...
So i dont know <

xPhRoZeNx · « **Reply #3 on:** February 22, 2004, 07:18:00 PM »

nope that did not work! <

shorty · « **Reply #4 on:** February 22, 2004, 07:21:00 PM »

I know it's not much of a help, but all that red ball does is turn off the xbox, same as if you press the power button, i have never heard of it causing anyone problems before, i suspect it's just an unhappy co-incidence.... like the chappie above said, maybe a bad solder, or a faulty xbox?

- Shorty <

lookformeb · « **Reply #5 on:** February 22, 2004, 08:05:00 PM »

xPhRoZeNx, so far, 4 identical posts in 4 different forums... jesus

http://forums.xbox-scene.com/index.php?sho...0&#entry1185866 <

xPhRoZeNx · « **Reply #6 on:** February 22, 2004, 08:11:00 PM »

ok pleas edont close my other posts i only had four i was checking them frequently to see if anybody from any forums had any idea how to fix my box.. i am desperate.... please help me... <

lookformeb · « **Reply #7 on:** February 22, 2004, 08:14:00 PM »

JayDee · « **Reply #8 on:** February 23, 2004, 02:51:00 AM »

What the "red ball" does is the same thing as the Turn Off option in evo-x does, It shut´s the xbox off...

And no, that the xbox wont turn on isn´t a xbmc issue, it sounds more like a clock loop (like you would get with exploits)

So, do you have a modchip or do you use exploits? <

amdrex · « **Reply #9 on:** February 23, 2004, 10:11:00 AM »

Did you screw around with any NTSC/PAL settings? I did, then when I rebooted nothing worked. Took me a little while to get it back up & running, but it's fine now. <

xPhRoZeNx · « **Reply #10 on:** February 23, 2004, 05:10:00 PM »

i have an executer 2.3b pro and i did play with the ntsc settings but i changed it to ntsc j instaerd of normal ntsc
<

JayDee · « **Reply #11 on:** February 23, 2004, 05:31:00 PM »

Author Topic: Xbmc Screwed My Xbox! (Read 45 times)