Print

[JCBDigger]

I've created an adpater using strip board (veroboard).  Works fine.
I've put the design on a web page for anyone who wants to make their own.

http://discoverthat....0usbadapter.htm

[Drunkn_Munky]

Wow the development looks really promising! Thanks for the tutorials JCB

[TVR_Fan]

Do you think one of these would work:

http://us.codejunkie...&l=1&ProdID=323

[JoHnnyTK36]

QUOTE(TVR_Fan @ Mar 7 2006, 02:07 PM)

Do you think one of these would work:

http://us.codejunkies.com/shop/product.asp...&l=1&ProdID=323

Yes one of those should work.

This post has been edited by JoHnnyTK36: Mar 7 2006, 10:56 PM

[TVR_Fan]

Good I order one in on Wednesday mate.

[ek5932]

Has any one who has modded their mem cards tried plugging the USB part into the USB slot of their 360. Will it read as a memory device or will it still recognise it as a card?

[Drunkn_Munky]

I think someone tried it, but was too scared to turn try access it.

I see no reason why it shouldn't.

[Seraph_Six]

QUOTE(JCBDigger @ Feb 20 2006, 12:11 PM)

I've created an adpater using strip board (veroboard).  Works fine.
I've put the design on a web page for anyone who wants to make their own.

http://discoverthat....0usbadapter.htm

*image cropped*

You inspired me!




All recycled parts from other projects...

- USB cable from a broken camera card reader
- Springy connectors from a broken xbox controller memory card jack
- A 27 ohm surface mount resistor yanked from the xbox controller PCB  
- PCB from the broken xbox controller cut and "milled" for each strip:


Works like a charm!

[CPO SPARKS]

Will a 1/2W 47 0hm resistor work instead of a 33 or 27 Ohm resistor?

[SteveNZ]

I've got the Datel X360 and Xbox card readers, and trying to use them in Windows XP-64, unfortunately the drivers aren't compatible. Anyone got any ideas as to how to get the X360 one in particular to work in XPx64? (The Xbox one I can just read over FTP from my Xbox so it's no biggy).

[Drunkn_Munky]

Any more development on this?

[Kaitou_Ace]

Hey guys.  I started ripping up my 2nd mem card because it was supplied by the beast itself to me.  well what i did was remove the mem chip all together and make the 360 mem connector run straight to standard 4-pin USB female.  i knew this wouldn't work before i started, but i thought it worth a shot so i can test all this crap we're trying on my own.  anway, when i plug in the mem card with no USB connected into the 360 mem card port, nothing happens.  when i connect a USB stick to that, however, the system rechecks itself.  of course, it doesn't find anything since i haven't figured out how to get that damned security chip over to my side yet.

i was wondering if anyone had tried piggybacking a USB off of the main mem card chip...  i doubt it'd work, but basically just run a usb pinout to female off of the internal connectors of the mem card on top of how they're already connected to the board.

anybody tried that one yet?

-Kaitou_Ace

[Kaitou_Ace]

so i tried my earlier suggestion.  of course, it didn't work.  i hook my mem card up to my pc to use boxplorer through one of those mem card to usb things you see in the stores to download content (yes they exist as mem to usb) and using the 1.1 drivers the mem card works fine.  once i add the usb cable piggybacking off the existing connections, the system no longer reads it.  the xbox 360 does the same thing it did before:  it reloads the devices to look for changes when you plug/unplug the mem card, but it never finds the card.  when i desolder the usb cable everything is normal again.

i damn thee, security chip; i damn thee straight to hell.

-Kaitou_Ace

[Drunkn_Munky]

Thanks for trying anyway.

[Superj159]

so is it possible to use for exemle a usb stick as memory or is that
totaly out of the question