Topic: Team Xecuter Presents RGH 2.0 (Read 589 times)

Aldanga · « **on:** February 25, 2012, 09:01:00 PM »

Fantastic news. Now I feel satisfied to update all of my fat consoles.

ploggy · « **Reply #1 on:** February 25, 2012, 09:42:00 PM »

Does this mean all slims are glitchable including the hana-less slims?

kast555 · « **Reply #2 on:** February 25, 2012, 11:09:00 PM »

I haven't been Modding since my xbox1 days with the old X3 and softmodds. I've been waiting and waiting and Waiting. I read about the RGH 1.0 and I started to awaken. Now seeing this I'm up and Adam.

Aldanga · « **Reply #3 on:** February 26, 2012, 12:12:00 AM »

QUOTE(wadodem @ Feb 26 2012, 12:04 AM)

Aargh, I just ordered a Coolrunner! Will the update to it be software or will the hardware/installation need to be changed? I have not upgraded to the new dash, should I go ahead with the installation anyway using RGH 1 or should I wait?

Does RGH 2.0 require a Demon or will it work with LPT NAND programming?

Did you even read the post?

QUOTE

This is a new style of RGH hack (hence RGH 2.0) and there will be a new JED file, changes to the CoolRunner design, changes to the QSB's and possibly new install methods (we'll also show you how to change your older version TX CoolRunner to be compatible with the new hack, and initial tests have shown that other cheaper versions of RGH hardware will not work at all).

If I was to guess, Demon won't be required.

wadodem · « **Reply #4 on:** February 26, 2012, 02:05:00 AM »

QUOTE(Aldanga @ Feb 26 2012, 08:12 AM)

Did you even read the post?

Yes I read that, the question is whether the change to the Coolrunner will be just a reflash of the Coolrunner, hardware mods to the Coolrunner board, and/or changes to the installation wiring. From the way they worded it, it isn't clear. But I guess no-one outside TX knows yet.

Aldanga · « **Reply #5 on:** February 26, 2012, 02:33:00 AM »

QUOTE(wadodem @ Feb 26 2012, 02:05 AM)

Yes I read that, the question is whether the change to the Coolrunner will be just a reflash of the Coolrunner, hardware mods to the Coolrunner board, and/or changes to the installation wiring. From the way they worded it, it isn't clear. But I guess no-one outside TX knows yet.

QUOTE

changes to the CoolRunner design, changes to the QSB's and possibly new install methods

I'd say that's pretty clear.

warbeast · « **Reply #6 on:** February 26, 2012, 05:05:00 AM »

QUOTE(Xbox-Scene @ Feb 26 2012, 03:56 AM)

This is a new style of RGH hack (hence RGH 2.0) and there will be a new JED file, changes to the CoolRunner design, changes to the QSB's and possibly new install methods (we'll also show you how to change your older version TX CoolRunner to be compatible with the new hack, and initial tests have shown that other cheaper versions of RGH hardware will not work at all)

i think this is a bit misleading sure if you bought or made a cheaper rgh without all the pinouts to the xc2c64a that might be needed or the correct vaule cap/wire lenth for the best boot time to begin with i can see how a new jed 2.0 file might not work at all

but still coolrunner and other xc2c64a rgh mods all use the same hardware so what can be removed added on a coolrunner can be added removed to another aslong as you can already match the coolrunner tweeks with ur diy cpld or cheaper rgh

then again if this was just about the so called Corona ready rgh i can fully understand why that hardware wouldnt work at all i dont think the team behide it knows how it works themselfs lol

Haygar · « **Reply #7 on:** February 26, 2012, 05:14:00 AM »

So, what does this mean for those of us with an already working (pre 14717) RGH console?

I can't see any need to alter mods or officially update dash/cb version other than the usual methods after initial rgh hacking is done.

DodgeM4s · « **Reply #8 on:** February 26, 2012, 06:22:00 AM »

These guys are like Gods!

squirtadmin · « **Reply #9 on:** February 26, 2012, 06:50:00 AM »

DEAOMN ALL IN ONE vs SQUIRT MODULAR DUAL NAND

1- Just released a cheaper (less then 20 USD street price) board that has a NAND IC and PULLUP on board
SQUIRT NAND PCB 16 MBYTE (here pictures and infos)
THis tool with SQUIRT or other cool runner allow you to install a DUAL NAND solution

2- Squirt BGA with OSC 48Mhz on board... HARDWARE ready for corona CLICK HERE

3- Squirt PROGRAMMER... SPI & JTAG programmer full integrated with squirt but also working with ANY cool runner or any X360 console stand alone.. CLICK HERE

Add also that squirt team FIRST IN THE SCENE released 2 days ago the NO TRACK CUT FIRMWARE
http://www.youtube.c...p;v=gtk6eZPQyzA

So finally we like an opinion... offer a "MODULAR" solution is better or not then a ALL IN ONE solution?

DUAL NAND SOLUTION SQUIRT use:
SQUIRT COOL RUNNER + SQUIRT NAND PCB 16 MBYTE.
an easy FCC cable came out from console and you can connect SQUIRT PROGRAMMER to manage SPI (both nand access) and JTAG flashing (cool runner RGH firmwares) ...

If someone like to REVIEW for free the FULL SOLUTION just write a PM ...

PS: we post here because seams xboxscene didn't find time to add the news

BYEBYE
SQUIRT TEAM

squirtadmin · « **Reply #10 on:** February 26, 2012, 07:19:00 AM »

Ehm... CYGNOS is not a RGH solution or ??

The FIRST WORLDWIDE is intended for a DUAL NAND CODE "NO TRACK CUT" full integrated in a RGH chip... or we are wrong?
SQUIRT manage RGH and DUAL NAND switch by SYNC button (no need external phisical switches) and without track cut.. this is the innovation...

Cygnos also work on another hardware technology (FPGA), not a xilinx one
Sorry but I think you did a bit of confusion...

OggyUK · « **Reply #11 on:** February 26, 2012, 07:28:00 AM »

I'll happily test / review / compare either unit

modslave · « **Reply #12 on:** February 26, 2012, 08:13:00 AM »

Any time OggyUK offers his services i'd take hime up on the offer

- unless your not happy with the product

Just picked up my first slim ready to be RGH'd today then seen this fantastic news! I love my JTAG PHAT booting Freestyle and like all Xecuter's previous products and support - future 360 scene lives on!

@waqrbeast #3 LOL

warbeast · « **Reply #13 on:** February 26, 2012, 08:21:00 AM »

QUOTE(squirtadmin @ Feb 26 2012, 03:19 PM)

Ehm... CYGNOS is not a RGH solution or ??

The FIRST WORLDWIDE is intended for a DUAL NAND CODE "NO TRACK CUT" full integrated in a RGH chip... or we are wrong?
SQUIRT manage RGH and DUAL NAND switch by SYNC button (no need external phisical switches) and without track cut.. this is the innovation...

Cygnos also work on another hardware technology (FPGA), not a xilinx one
Sorry but I think you did a bit of confusion...

omg let me explain it to you

ur no cut for CE same as cygnos is also just so you can switch nands having rgh onboard doesnt make the CE no cut a 1st just because cygnos hasnt got rgh onboard what does rgh have to do with CE dual nand

2nd. cygnos has the switch on the usb board if you are using the sync button to switch then ur still using a switch! lol

so yh you could word it as ur the 1st to include both on one pcb but isnt it a addon connected over ribbon cable anyway?

also can i ask does urs reset southbridge after switching nands like cygnos ive had a quick look and to me it doesnt maybe thats why you say the psu needs to be pulled in some cases...

ddsdavey · « **Reply #14 on:** February 26, 2012, 08:58:00 AM »

QUOTE(rwcottrell @ Feb 26 2012, 07:59 AM)

im guessing microsofts next update will be something to mess with flashed drives,backups ect and once thats defeated[and it will be]

LMFAO,you serious!?

Author Topic: Team Xecuter Presents RGH 2.0 (Read 589 times)