Topic: The Xbox 360 reset glitch hack - New Homebrew Hack! (Read 20239 times)

kipper2k · « **Reply #1170 on:** December 26, 2011, 02:40:00 PM »

QUOTE(marcus.miranda @ Dec 22 2011, 02:28 PM)

Hehehe!
Bad nights! Completely understandable

Well, I already have one slim board from Kipper, but it's the one with the mini-USb stuff. The one he posted an image some replies back looks very clean for me... I'd like to give'em a try.
But thanks anyway for your reply

Cheers!

Here's the new slim eagle files...

New Slim eagle files

c14nz · « **Reply #1171 on:** December 26, 2011, 03:21:00 PM »

and the S (small 37x34mm) version for the same board......and is a phat+slim board

IPB Image

marcus.miranda · « **Reply #1172 on:** December 27, 2011, 04:44:00 AM »

QUOTE(kipper2k @ Dec 26 2011, 07:40 PM)

Here's the new slim eagle files...

New Slim eagle files

Thanks a lot, Kipper!

mouseym · « **Reply #1173 on:** December 27, 2011, 03:49:00 PM »

QUOTE(Kamse @ Dec 26 2011, 11:28 PM)

Nice one guys.
Does anyone worked on a solderless jtag adapter like this one ?
It might not be hard to do, but to respect the size :
<large images here>

Suggest it to TX, they might do it.

dronecz · « **Reply #1174 on:** December 28, 2011, 02:49:00 AM »

QUOTE(c14nz @ Dec 26 2011, 11:21 PM)

and the S (small 37x34mm) version for the same board......and is a phat+slim board

IPB Image

Hi,

will you share your board eagle files? I like it ;-) and I would like to try it.

Many thanks

ps2moduk · « **Reply #1175 on:** December 28, 2011, 05:27:00 AM »

Solderless is fine, however a lot of the boards have the holes presoldered so you would still need to desolder those holes to fit a solderless chip.

membre999 · « **Reply #1176 on:** December 30, 2011, 11:01:00 AM »

i want to glitch a phat but don't have the necessary 22k resistor at hand. Can I by any chance rip this out of an old DVD Drive ?

vb_encryption_vb · « **Reply #1177 on:** December 30, 2011, 11:18:00 AM »

QUOTE(membre999 @ Dec 30 2011, 01:01 PM)

i want to glitch a phat but don't have the necessary 22k resistor at hand. Can I by any chance rip this out of an old DVD Drive ?

If you can find 1, I don't see why not. A resistor is a resistor now matter where it came from lol. Just make sure its 22k

kipper2k · « **Reply #1178 on:** December 30, 2011, 01:04:00 PM »

QUOTE(membre999 @ Dec 30 2011, 07:01 PM)

i want to glitch a phat but don't have the necessary 22k resistor at hand. Can I by any chance rip this out of an old DVD Drive ?

\

You could probably get away with using a 20 - 25K resistor, and dont forget you can always use them in parallel or series to get it... for instance, 2 x 47K resistors in parallel (one on top of the other) would give you 23.5K which would work

scrimpus · « **Reply #1179 on:** December 31, 2011, 05:33:00 PM »

QUOTE(malison @ Dec 31 2011, 10:06 AM)

Hi,
I have a problem with my 16Mb Jasper Xbox. I installed a Coolrunner II ngzhang rev B. When I writed the Ecc what I generated with multibuilder v0.7, it refused to boot to xell. I can hear the console try to glitch every 5-6 seconds (the fans do a pulse every 5-6 secs). I used only a 22K resistor. If I buying a 68nf capacitor, it will booting? Or it has another problem? Thanks!

Coolrunner II rev. B has the capacitor built in, I believe you need to bridge the proper solder points to enable it .

malison · « **Reply #1180 on:** December 31, 2011, 11:29:00 PM »

Thanks for your answer! I removed the R1 and R5, and I made a bridge between the R2 pads. Is that what you think? If it help, I will make a pictures.

c14nz · « **Reply #1181 on:** January 02, 2012, 09:21:00 AM »

SFS (small fat+slim) final version only the pdf for the moment (you must bridge P1 and P2)

IPB Image

PDF: http://www.2shared.c...NQ63s-/SFS.html

Semiroundboss · « **Reply #1182 on:** January 02, 2012, 10:14:00 PM »

5 questions:

1. Does this work for falcon models?
2. Does this work for the halo reach slim console? (Don't know what version the reach console is sadly.)
3. Where can I buy this?
4. Is there a noob friendly guide or mod chip for this?
5. Is it possible to get emulators?

5 questions:

1. Does this work for falcon models?
2. Does this work for the halo reach slim console? (Don't know what version the reach console is sadly.)
3. Where can I buy this?
4. Is there a noob friendly guide or mod chip for this?
5. Is it possible to get emulators?

Dicko316 · « **Reply #1183 on:** January 03, 2012, 07:06:00 AM »

QUOTE(Semiroundboss @ Jan 3 2012, 05:14 AM)

5 questions:

1. Does this work for falcon models?
2. Does this work for the halo reach slim console? (Don't know what version the reach console is sadly.)
3. Where can I buy this?
4. Is there a noob friendly guide or mod chip for this?
5. Is it possible to get emulators?

1. Yes, and also all consoles except Xenons and the newer Slims, manufactured after Aug 2011.
2. Yes, also on the gears of war 3 limited edition one too!
3. The console? or the glich chip?
For the console try the usual places, Amazon, wallmart, gamestop, Dell etc.
For the glitch chip try your local xecuter distributer for coolrunner, ebay, one of the cheapo websites like dealextreme, or even one of the guys on this site as some are selling chips they've made themselves.
4. There are plenty of tutorials, but if you are new to this I'd highly advise you pay someone who knows what they are doing to install the Mod for you. As this is very complex and can be easily messed up.
5. Yes, as well as many other things too!

BoNg420 · « **Reply #1184 on:** January 03, 2012, 09:59:00 AM »

QUOTE(Semiroundboss @ Jan 3 2012, 10:10 AM)

Where can I get the glitch chip?

http://team-xecuter.com/where-to-buy/

Author Topic: The Xbox 360 reset glitch hack - New Homebrew Hack! (Read 20239 times)