Print

[Looouky]

QUOTE(sephiroth99 @ Aug 28 2011, 08:27 PM)

I saw that, but shipping was like 30 bucks (for me, to Canada)! I decided to try my luck with the other board. Guess I'll report back when I receive it.

QUOTE(cory1492 @ Aug 28 2011, 09:05 PM)

Works fine on slim at any rate, only have falcon here otherwise and wasn't able to get it to go (apparently my guesses at timing were too random to work.) It is the same CPLD just different layout for the breakout board, you just have to look at source to find the pin numbers to match up (DONT use the numbers from the CMOD in the release diagrams.) For slim you can set rail 1 by the jumpers to 1.8V and 2 to 3.3V, wire it up, flash it and have a go without modifying the board, on fat you have to add diodes and resistors from 3.3V to supply lead for rail 1 and leave off the jumper for that rail.

Why I are we adding diodes and resistors for the fat, if using this board? Do you have a diagram?

[iwanttheagrocrag]

AWESOME!!! The floodgates are back open! This should get the home-brew scene rolling alot faster now that everyone that accidentally updated there xbox's a couple years ago have a shot a redemption.

THANKS GliGli, Tiros, cOz, Razkar, tuxuser, cjak, Redline99, SeventhSon, tmbinc

[xxdylanxx]

thanks for all those involve in this.. i never thought it is still possible to run even xell, still waiting for more devepolment..  BTW no diagrams for jasper out yet?!?! i have 1 jasper here waiting to reconcile with its dvd key  

   this is even bigger news than 2012 prophecy

[kipper2k]

QUOTE(xxdylanxx @ Aug 29 2011, 05:21 PM)

thanks for all those involve in this.. i never thought it is still possible to run even xell, still waiting for more devepolment..  BTW no diagrams for jasper out yet?!?! i have 1 jasper here waiting to reconcile with its dvd key  

   this is even bigger news than 2012 prophecy

 the diagrams are out for the jasper, they are in the reset_glitch_hack_v1.00.rar file

[guvna]

This is all well and good, and kudos to the hard work that's gone into finding this, but I'd be interested to know if this will be detectable by live. I think it should be. After all, you only want to unlock the hardware so you can write homebrew for it, and not run pirated games. Backups my arse. Leave live alone for those that leave their consoles un-tampered.

[xxdylanxx]

QUOTE(kipper2k @ Aug 29 2011, 06:27 PM)

the diagrams are out for the jasper, they are in the reset_glitch_hack_v1.00.rar file

thanks i have it already.. waiting for my coolrunner ordered in ebay.. BTW im from philippines.. thanks again

[kipper2k]

QUOTE(guvna @ Aug 29 2011, 05:39 PM)

This is all well and good, and kudos to the hard work that's gone into finding this, but I'd be interested to know if this will be detectable by live. I think it should be. After all, you only want to unlock the hardware so you can write homebrew for it, and not run pirated games. Backups my arse. Leave live alone for those that leave their consoles un-tampered.

seeing as it will need to use a version of freeboot etc, it will be completely detectable by live, this is strictly offline and Xlink kai gaming

[socalbill]

Anyone know where to find a schematic for a usb-jtag cable?

There's a schematic in the pdf tut for an lpt cable and I found a schematic for a jtag3 cable for a xilinx spartan-3 board, but that's lpt also.

There must be some schematic for a diy usb cable, the one on the Digilent website is $47 and change + tax.

[Orka]

QUOTE(UnrealEureca @ Aug 29 2011, 05:13 PM)

Does anyone have a diagram to an lpt connection to dump the nand on a slim? I don't have a USB nand reader and the prices online for them are crazy expensive.

Same for ALL 360.

http://www.team-xecu...ead.php?t=69336

Crazy price? The NAND-X or the Maximus 360 Nand Flasher..

[kipper2k]

QUOTE(socalbill @ Aug 29 2011, 06:13 PM)

Anyone know where to find a schematic for a usb-jtag cable?

There's a schematic in the pdf tut for an lpt cable and I found a schematic for a jtag3 cable for a xilinx spartan-3 board, but that's lpt also.

There must be some schematic for a diy usb cable, the one on the Digilent website is $47 and change + tax.

http://www.kipper2k.com/usbflash.html

all info, links etc are there

[chipD]

I wonder if a XC9500XL series could be used?

I have a few SaveMii's laying around collecting dust, and a bunch blank XC9536XL chips aswell.

[RRODXbox]

With the Diligent Cmod theres two resistors you need to remove and bridge with a wire, does this need to be done on these versions as the PCB design is different? http://www.ebay.co.u...=item2c5ee98686

[Orka]

QUOTE(RRODXbox @ Aug 29 2011, 05:41 PM)

With the Diligent Cmod theres two resistors you need to remove and bridge with a wire, does this need to be done on these versions as the PCB design is different? http://www.ebay.co.u...=item2c5ee98686

Look at the schematics in the file from http://www.sendspace.com/file/f7vrem

glitch48nofullpost.png shows what we need to do. I have ordered the one from eBay. Expecting it to arrive this week.

[kipper2k]

QUOTE(UnrealEureca @ Aug 29 2011, 06:50 PM)

Why is everyone so eager to flash their 360's already? There isn't anything up right now other than booting into Xell.

 Do you really need to ask that question with the amount of people out there chomping at the bit to get everything up and running on it ?

[UnrealEureca]

QUOTE(kipper2k @ Aug 29 2011, 06:53 PM)

Do you really need to ask that question with the amount of people out there chomping at the bit to get everything up and running on it ?

Yes because the question is Why are they chomping at the bit to get everything up and running on it. If your talking about the developers I don't think every person thats posted in here wanting to set it up is going to be developing something for this.

The reason why I ask the question is so that I have a reason to go and mod my slim right now.