Topic: The Xbox 360 reset glitch hack - New Homebrew Hack! (Read 20239 times)

ichigoxxx · « **Reply #75 on:** August 29, 2011, 04:46:00 AM »

cant wait to try this great news for the scene. there goes xkey360....

ploggy · « **Reply #76 on:** August 29, 2011, 05:10:00 AM »

QUOTE(Orka @ Aug 29 2011, 12:02 PM)

They need to make xkey360 "live safe" to get some sales now.. i doubt they will be able to.

I think now would be a good time to announce that astonishing feature they were holding back

xboxhaxorz · « **Reply #77 on:** August 29, 2011, 06:09:00 AM »

QUOTE(kipper2k @ Aug 28 2011, 10:24 PM)

Here's the proper board... better hurry, i foresee a shortage of these

http://digilentinc.c...m...8&Prod=CMOD

I already ordered a few

why a few, do we have to leave them in there?

with the nandx you remove that but leave the diodes installed

QUOTE(tech3475 @ Aug 29 2011, 06:13 AM)

So wait, will my xenon console see support in the (preferably near) future?

My understanding of the phat hack is that it just needs that pin for resetting the CPU, I didn't think HANA had anything to do with it.

God this is (insert rant here), I missed out on JTAG and now I may miss out on this hack as well.

why are peeps so concerned with xen who cares, that board is horrible

not to mention it lacks hdmi so its old technology, repairing xen boards is sometimes a waste of time for me unless i replace the gpu

hangover · « **Reply #78 on:** August 29, 2011, 06:18:00 AM »

QUOTE(xboxhaxorz @ Aug 29 2011, 10:09 PM)

why a few, do we have to leave them in there?

with the nandx you remove that but leave the diodes installed
why are peeps so concerned with xen who cares, that board is horrible

not to mention it lacks hdmi so its old technology, repairing xen boards is sometimes a waste of time for me unless i replace the gpu

The board stays in place for now untill a modchip comes out that is more compact and pre programmed, this is no noob friendly hack so wont take off for the average diyer till an easier solution comes out.

kipper2k · « **Reply #79 on:** August 29, 2011, 06:19:00 AM »

QUOTE(kipper2k @ Aug 29 2011, 04:56 AM)

The board can be made real tiny as there is a lot of pins etc that are not needed, the board schematics are on the digilent webpage also

heres info on the chip...

http://search.digike...ame=122-1410-ND

only 17,004 in stock

Wow,

there are now only 1680 left. Someone has got plans

Sunsoar · « **Reply #80 on:** August 29, 2011, 06:20:00 AM »

thanks to all those involved ...
I see people dancing in the street ...

Now if I could jsut reuse some of the old Xbox 1 mod chips with xilinx chips I have collecting dust.
Xenium and clones

danthaman673 · « **Reply #81 on:** August 29, 2011, 06:22:00 AM »

Yay!?!?! I think...

so many mixed feelings about this ! It's good in most ways, but I'm worried this will screw-up live, just around the time all the year's top games are about to come-out! I kinda missed this as I've had my head buried in Deus Ex for the last week... This hack is very clever! But I think I may already know a way they might patch it.... But we will see.. Most likely end-up being the new front of cat&mouse... Kinda glad now that I didn't go too far don the other path.. (which no-doubt will still have a role to play, just not as big ...)

Timning is a tricky thing, but I have always said I thought it could used in a manner similar to this.. guess the 720 will(possibly) launch a little earlier after all ;-)

Looking forward to using the new media playa on my slim

Better go play some BC2 before it's ruined also.... :-(

At least we'll have some work again, after the JTAG'able shortage

Thanks guys, (GliGli, Tiros, cOz, Razkar, tuxuser, cjak, Redline99, SeventhSon, tmbinc... I/we needed the work ;-)

hangover · « **Reply #82 on:** August 29, 2011, 06:32:00 AM »

QUOTE(Roden @ Aug 29 2011, 10:26 PM)

So what use is this for already jtagged systems?, its just a way to jtag prett much any console?, and i guess its still detectable?

None, yes, yes.

michalss · « **Reply #83 on:** August 29, 2011, 06:45:00 AM »

All comanies are out of stock this device allready!!!!! Very sad ppl buying something they dont even know how to use it

ploggy · « **Reply #84 on:** August 29, 2011, 06:51:00 AM »

QUOTE(honda4eternity @ Aug 29 2011, 01:43 PM)

I guess I'm one of the lucky few. I have 2 jasper jtags (1 for sale by the way :-)

I'll give you 20 quid for it

digipimp75 · « **Reply #85 on:** August 29, 2011, 07:51:00 AM »

OMG great news!!! Gone are the days of people extorting $400+ for Jasper jtags lol

jsjar · « **Reply #86 on:** August 29, 2011, 08:12:00 AM »

now it's gona be $400+ for non jtag jaspers

kipper2k · « **Reply #87 on:** August 29, 2011, 08:42:00 AM »

I found these boards on ebay,..

http://www.ebay.ca/i...=item2c5eeb3685

not sure if they could be used, don't see why not, but don't yell at me if you buy and they no good

evans05 · « **Reply #88 on:** August 29, 2011, 08:49:00 AM »

excellent, messed up my first jtag, never got it running, gonna leave this for someone who knows what there doing, hopefully get a freeboot or something come out, and hopefully be able to play any region games

cheers for the hard work

kipper2k · « **Reply #89 on:** August 29, 2011, 08:53:00 AM »

QUOTE(Mr.Gamer @ Aug 29 2011, 03:46 PM)

So currently is there any possibility to get the CPU key running Xell and flash FreeBOOT or XBReboot to the NAND on any Slim or supported (Opus, Zephyr) Fat console?

In other words what unsigned code can be run for the current moment thanks to the reset glitch hack?

I believe that a version of freeboot specifically for the slim needs to be released in order for same capabilities as the current jtagged fats. homebrew can be run though as shown in emulator being run.

and yes to the cpukey... watch the video here....

http://xbox-360.logi...disponible.html

and here...

http://xbox-360.logi...box-360-en.html

Author Topic: The Xbox 360 reset glitch hack - New Homebrew Hack! (Read 20239 times)