xboxscene.org forums

Author Topic: Homemade Usb To Ide?  (Read 69 times)

50centSHOW

  • Archived User
  • Jr. Member
  • *
  • Posts: 58
Homemade Usb To Ide?
« on: September 06, 2004, 05:06:00 PM »
Man do I have the same problem
Logged

Arakon

  • Archived User
  • Hero Member
  • *
  • Posts: 629
Homemade Usb To Ide?
« Reply #1 on: September 06, 2004, 06:20:00 PM »
such a converter would cost you several hundred bucks in books, programming devices , parts and pcb etching equipment, as well as quite a few hours to learn about programming and pcb construction.
simply put, forget it. it takes A LOT more than a few wires and resistors to make such an adapter.
Logged

darius13

  • Archived User
  • Newbie
  • *
  • Posts: 4
Homemade Usb To Ide?
« Reply #2 on: September 06, 2004, 09:21:00 PM »
QUOTE (Arakon @ Sep 7 2004, 02:23 AM)
such a converter would cost you several hundred bucks in books, programming devices , parts and pcb etching equipment, as well as quite a few hours to learn about programming and pcb construction.
simply put, forget it. it takes A LOT more than a few wires and resistors to make such an adapter.

Well, then the adapters for sale on ebay are either fake, or an amazing deal for under 20 bucks. anyway, i was just wondering if there was a tut somewhere on the web, or if someone had personal knowledge. i know its possible, and do plan on buying one, i just want to get my xbox hd fixed asap. dry.gif
Logged

darius13

  • Archived User
  • Newbie
  • *
  • Posts: 4
Homemade Usb To Ide?
« Reply #3 on: September 06, 2004, 09:23:00 PM »
Logged

networkBoy

  • Archived User
  • Sr. Member
  • *
  • Posts: 306
Homemade Usb To Ide?
« Reply #4 on: September 06, 2004, 09:24:00 PM »
thus, just buy the thing off ebay.
I was looking into doing this using the manufacturers reference design and the cheapest I figured I could do it was about $60 each (making 10 of them).  This makes me wonder how the hell they can make a profit at $20 or $30 each.
-nB
Logged

FallsInc

  • Archived User
  • Hero Member
  • *
  • Posts: 571
Homemade Usb To Ide?
« Reply #5 on: September 06, 2004, 11:01:00 PM »
http://www.newegg.co...-145-843&depa=1

cheapest way... and you actually have a use for it when your done
Logged

SICKdimension

  • Archived User
  • Hero Member
  • *
  • Posts: 953
Homemade Usb To Ide?
« Reply #6 on: September 07, 2004, 02:03:00 AM »
Does the hard drive draw power through the usb as well? You don't have to plug a molex into it??

Just seems strange to get a hard drive to get power and transfer data from 4 wires.
Logged

darius13

  • Archived User
  • Newbie
  • *
  • Posts: 4
Homemade Usb To Ide?
« Reply #7 on: September 07, 2004, 08:09:00 AM »
QUOTE (SICKdimension @ Sep 7 2004, 10:06 AM)
Does the hard drive draw power through the usb as well? You don't have to plug a molex into it??

Just seems strange to get a hard drive to get power and transfer data from 4 wires.

No, it has a separate power adapter that you plug into the wall

user posted image
Logged

bleugh

  • Archived User
  • Sr. Member
  • *
  • Posts: 373
Homemade Usb To Ide?
« Reply #8 on: September 07, 2004, 10:02:00 AM »
USB is NOT capable of driving a 3.5 inch hard drive, so you WILL need an external 12V PSU and probably a 5V one too (or just make a small step down circuit from 12V)

a 3.5" HDD can pull around 2A on spinup, and will settle about 3-400mA or so,
so you need a beefy PSU


...........as for developing your own USB-IDE converter, forget it,
bridge chips cost about £4 in 1 off quantities, then theres the PCB and cable, which could be had for free if you're hacking up some other device.

then theres the extra components, and the time and the firmware development!

you can buy USB enclosures for under £15 nowadays, hack them up :-)
Logged