xboxscene.org forums

Author Topic: 1st Jasper Dump Having Issues  (Read 79 times)

death69inc

  • Archived User
  • Full Member
  • *
  • Posts: 185
1st Jasper Dump Having Issues
« on: August 24, 2010, 01:45:00 AM »

HOW DO YOU FIND WHAT CB YOU HAVE ON A 256 JASPER DUMP

have seen poeple ask not seen a steight answer yet.
I did read cdinfo will do it but I do not have cdinfo and can not find cdinfo yet
if xbins has it i have yet to find it in there ...greatly setup filing system system

All I want to know if this jasper is jtagable it should be but you never know
2008-11-12 blades dash (have it on bench dumping right now or would tell the kern)
even with a usb dumper takes forever

have jtagged 50+ units with very little issues none where jaspers degraded worked for them not working for these along with many other tools it seems
360 flash tool wont read it
degraded witll not read it if i edit the date it crashes

so what tools do you use for jaspers?
Logged

death69inc

  • Archived User
  • Full Member
  • *
  • Posts: 185
1st Jasper Dump Having Issues
« Reply #1 on: August 24, 2010, 02:01:00 AM »

found this in one of the tuts I didnt see before

X = 5, 6, 7, 8 or 9 (depending on what dash you have/when your console was made).

now search in hex for "CB" (without quotes) your looking for the one at or around 8400 in hex (it has to be in caps).
copy the 4 hex digits after it and convert it from hex to dec with this Conveter
Like This

Xenon: 1921 or lower is Exploitable (exception: 8192 IS EXPLOITABLE)
Zephyr: 4558 or lower is Exploitable (exception: 4580 IS EXPLOITABLE)
Falcon: 5770 or lower is Exploitable
Jasper 16mb: 6712 or lower is Exploitable
Jasper Arcade (256/512): 6723 or lower is Exploitable


so I think i did it
8400 reads 43 42 1a (CB highlights 43) 4 digits after are 42 1a converts to 6626  but I need to know for sure im looking at the right numbers
never was much on hex editing etc

well answered my own question seems i was doing it wrong found cdinfo finally in a tool pack also updated 360 flashdump tool that reads it
cb = 6712  
so with hex iditor i had 8400   43 42 1a 38   i guess the 1a38 was the cb
as stated hate hex
Logged

ImRickJamesB1tch

  • Archived User
  • Sr. Member
  • *
  • Posts: 306
1st Jasper Dump Having Issues
« Reply #2 on: August 24, 2010, 04:34:00 AM »

Dump the firmware with XnandHealer (Link in my sig).

Will also tell you if your console is exploitable...
Logged

thwack

  • Archived User
  • Hero Member
  • *
  • Posts: 785
1st Jasper Dump Having Issues
« Reply #3 on: August 24, 2010, 04:51:00 AM »

Also worth noting - 360 Flash Tool 0.95 will read big block NANDs (and tell you if you've got bad blocks).

And any 360 with the blades dash will be exploitable.

Logged