Print

[barbarus]

anyone have the file:

     - crl.bin
     - crl.bin.meta
     - extended.bin
     - extended.bin.meta
     - odd.bin
     - odd.bin.meta
     - secdata.bin
     - secdata.bin.meta
     - smc_config.bin

for a falcon 16mb PAL?

thanks in advance

[Faluke]

ok so I got freeboot flashed and all is working except xbla games in freestyle dash. For some reason they won't play. I can play them inside the nxe just fine but not in freestyle dash. Weird.

[Kamse]

QUOTE(barbarus @ Apr 23 2010, 07:54 AM)

anyone have the file [...] for a falcon 16mb PAL?
thanks in advance

I do but which cb (mine is 5770 by the way...) ?

[duhh]

QUOTE(Pacotera @ Apr 23 2010, 05:36 AM)

Just helped a friend that was using xbr3 on a jasper

He made a fulldump and emailed my the dump + his cpukey

Created a freeboot 0032 image with my jasper files (had to delete first 16 bytes from the kv) and emailed him back

working fine after full flash on flash360

Hey, can you clarify something. When you said he made a full backup, are you speaking of a full original backup from premod, or a full backup from xbr3?

I followed a guide instructing me to do the old only backup first 2 mb method, long short short I have a working xbr3, but ended up without a full original nand backup.

[Faluke]

QUOTE(Faluke @ Apr 23 2010, 06:05 AM)

ok so I got freeboot flashed and all is working except xbla games in freestyle dash. For some reason they won't play. I can play them inside the nxe just fine but not in freestyle dash. Weird.

Anyone else see this same problem? Can only run xbla games from nxe for some reason. Do I need to repatch them all now that I have a new kernel?

[duhh]

perhaps I am crazy, but it seems like peeps in #freeboot seem to think that there is no need for an orig at all, and that simply dumping the current xbr3 image with flash360 will do the trick ?

[relaxxx]

If you don't have your orig.bin and just have your xbr3.bin, you do also need the donor files from some other orig of same board version. You put the donor files in the ibuild data folder plus your two files extracted from your motherboards XBR...

[charon99]

one question about Smc_Config.bin, i made a Nandbackup with Flash360 and opened it with 360 Flash Dump Tool, i extracted the smc and kv, but there is no Smc_Config.bin inside the image, there is only a config.bin inside, is that the correct one and i just need to rename it? I have Donar files.

cHarOn

Update: Ok found it out already config.bin is not compatible, but if you extract your sbr nand backup with ifconfig then you will get the Smc_Config.bin file

[iwanttheagrocrag]

I just flashed my 360 with this tut thanks alot Pacotera. Here is the data folder for my falcon i used right before the final image.bin build in ibuild (should save a few falcon owners alot of time and don't need to update to 7371). Not including the smc.bin or kv.bin which you have to get from your xbr backup image anyway. Link for data folder. I want to also tell people that the default patches for free-boot are the Xbox1 compatibility not the trainers compatibility. And Pacotera didn't say but when i flashed with Flash360 i flashed it without keeping the config and kv from xbr (B button i think).

[duhh]

QUOTE(Faluke @ Apr 25 2010, 05:10 PM)

That's what this whole thread is about dude. Did you even read the first post?

To clarify on my late night ramblings, I meant without any original dump or donor nands. Perhaps it contains donor nand files in the background and I don't know, but freeboot toolbox maker is magic Fed it a key, and it build a new image for my box, no hassles, works great (aside from xvid)

[Pacotera]

QUOTE(duhh @ Apr 28 2010, 04:18 AM)

To clarify on my late night ramblings, I meant without any original dump or donor nands. Perhaps it contains donor nand files in the background and I don't know, but freeboot toolbox maker is magic Fed it a key, and it build a new image for my box, no hassles, works great (aside from xvid)

yes, the donor files are packed on the exe

[Martinchris23]

Just a piece of advice - if you're using flash360 to write the new image and your existing XBR installation is working fine, remember to select the option to KEEP the KV and config of the existing install. You don't need to overwrite these if they're working and it reduces the risk of getting it wrong.

[Faluke]

This guide worked great for one xenon system of mine using that xenon pack that someone posted. The second system gets a 3RR with secondary error code of 0022 when I try on a second xenon system I have. I have posted some screen shots of some bad blacks that the second system has that the first didn't. I didn't do any remapping because the guide doesn't say to.

http://forums.xbox-s...p;#entry4682483

fortunately I'm keeping my lpt cable hooked up until I get this figured out. I just reflash to my xellous/XBR3 flash every time it Red Rings.

[Faluke]

update.

I've tried following the normal freeboot instructions using an orig.bin nand dump that I did when I first JTAG'd. I got the same error. I've tried easy freeboot and I've tried flashing with xellous too. All same results.

[Pacotera]

Try some program to remap those bad blocks