Topic: Zephyr Xbr3 Random Rrod Troubles (Read 74 times)

Cisk · « **on:** April 05, 2010, 02:30:00 PM »

Will try it myself soon.

vb_encryption_vb · « **Reply #1 on:** April 05, 2010, 10:55:00 PM »

It's still hit and miss without a chip...

ZprivateZ · « **Reply #2 on:** April 05, 2010, 11:30:00 PM »

I just tried this tonight and after 15-20 boots I haven't seen an e79 error (knock on wood) but only time will tell I will give it a few more days and see how it goes and post back.

juggahax0r · « **Reply #3 on:** April 06, 2010, 09:50:00 AM »

I did this as well and have not had the e79 show up again yet..Thanks for the info i couldn't find the original thread i read it in anymore. Was this also setting everyones system back too 11/22/2005 AKA release day?

ZprivateZ · « **Reply #4 on:** April 06, 2010, 10:49:00 AM »

Well it was too good to be true, the e79 has returned.

juggahax0r · « **Reply #5 on:** April 06, 2010, 11:10:00 AM »

QUOTE(Yacker @ Apr 6 2010, 11:00 AM)

Can you detail exactly what you did and was it on a crynos chip? Did you inject the config.bin?

Thanks

I did the exact same commands listed at the top of the thread , only i didn't use LPT i flashed using flash360. And no it is just a stock NAND , no chip

ZprivateZ · « **Reply #6 on:** April 06, 2010, 12:05:00 PM »

I got 15-20 boots before it happened this time ah well my daughter just has to live with it for now

juggahax0r · « **Reply #7 on:** April 07, 2010, 08:43:00 AM »

Mine has started doing it again as well. Although it does seem less frequent now. I wish someone would come up with a fix for this problem. I am not downgrading to a xenon just for stability. If i get a second power supply and a/v cable set i will experiment a little. I am enjoying modding Oblivion too much to break away and start anothing project , and i only have 1 powerbrick and a/v cable. I have 5 working 360s and only 1 powerbrick what a hassle. No they aren't all mine , i have 3 that are LIVE boxes with 8955 i was kinda sad when i got them in and saw that after i got them running again.

juggahax0r · « **Reply #8 on:** April 10, 2010, 01:04:00 PM »

Anyone else have this issue goten it working better yet?
I am going to flash mine with a full falcon image see if that helps at all.

catchthabeat · « **Reply #9 on:** April 10, 2010, 02:32:00 PM »

Im curious guys, what parts/pieces did you use for the jtagging?

I switched to a 330ohm resistor for the bridge wire and that seemed to help make the e79 disappear. Also, I am using the standard diodes, not the BAT ones.

juggahax0r · « **Reply #10 on:** April 10, 2010, 02:36:00 PM »

QUOTE(catchthabeat @ Apr 10 2010, 04:32 PM)

Im curious guys, what parts/pieces did you use for the jtagging?

I switched to a 330ohm resistor for the bridge wire and that seemed to help make the e79 disappear. Also, I am using the standard diodes, not the BAT ones.

I will give it a shot , i am using the 1n4148 diodes not the bat41 too. Have you rebooted and rebooted and unplugged and rebooted to test that it is gone. Mine was gone for a couple days and then came back again. I am really getting frustrated haveing to reset all my info when i turn it on.

catchthabeat · « **Reply #11 on:** April 10, 2010, 05:08:00 PM »

QUOTE(juggahax0r @ Apr 10 2010, 04:36 PM)

I will give it a shot , i am using the 1n4148 diodes not the bat41 too. Have you rebooted and rebooted and unplugged and rebooted to test that it is gone. Mine was gone for a couple days and then came back again. I am really getting frustrated haveing to reset all my info when i turn it on.

Ya...I still get it here and there

I think if it keeps up Ill install the BAT diodes, as those are faster and more efficient. I dont think it's a xbreboot issue, but how the wiring is done.

juggahax0r · « **Reply #12 on:** April 12, 2010, 12:58:00 PM »

Yes people get it trying to boot too xell also , we can let this die it will either be fixed in the next release or it will be an ongoing prob and i won't be using Zephyrs anymore for Jtags.

juggahax0r · « **Reply #13 on:** April 12, 2010, 03:42:00 PM »

I have had success with replacing the SMC code if you read up higher in the thread. Now it only does it after i unplug it , so the solution in my case is just leave it plugged in except i do work on many machines and i only have 1 powerbrick so that is where i get fucked. It is just annoying having to reset everything but whatever i guess.

vb_encryption_vb · « **Reply #14 on:** April 12, 2010, 06:24:00 PM »

QUOTE(juggahax0r @ Apr 12 2010, 02:58 PM)

Yes people get it trying to boot too xell also , we can let this die it will either be fixed in the next release or it will be an ongoing prob and i won't be using Zephyrs anymore for Jtags.

I have 2 of them sitting on my shelf waiting for a fix, I'd sell them but don't feel like hearing anyone bitching at me about the constant/random e79...

Author Topic: Zephyr Xbr3 Random Rrod Troubles (Read 74 times)