Print

[BLOODRED6366]

QUOTE(kspamhere @ Feb 26 2010, 12:58 PM)

hey my jtag xenon xbr3 switches itself on and off by itself would this point to faulty switching diodes or something else when i just had the nand reader plugged in no jtag cable it also done it, weird hey? maybe its a ground some where. even with no rf board it manages to do it, ideas please its like having a haunted xbox lol

I have the same problem sometimes with my JTAG'd Falcon..i.e. PLug in power cable and it boots immediately (without pressing the button)....turn it off and it boots back up again.

After investigating i found that one of the JTAg wires was accidently shorting itself on metal case.
Put some electrical tape around it and that fixed it.

hope that helps.

[kspamhere]

QUOTE(BLOODRED6366 @ Feb 26 2010, 12:07 AM)

I have the same problem sometimes with my JTAG'd Falcon..i.e. PLug in power cable and it boots immediately (without pressing the button)....turn it off and it boots back up again.

After investigating i found that one of the JTAg wires was accidently shorting itself on metal case.
Put some electrical tape around it and that fixed it.

hope that helps.

 thanks i cleaned the board and the chassis and blew out the connectors seems to be fine now