Print

[[Jed]]

Right this is really annoying me and I mean really,

Xenon solderd lpt on, worked fine dumped original , flash xbr 3 .
And then with Flash360(not balming you Redline lol) flashed a 1888 image with built from degraded, now when i boot i get no video / audio input AT all ,

so i soldered the lpt back on and check all joints etc , (from the bottom of the board i held a multimeter and i soldered the componants etc ont he top bit but from then i put one end on the lpt pin and the other on the botton of the board) yet all had a currency so it isnt my soldering, but it cannot detect it in my computer with NandPro 2.c , I tried flashing another xenon and it worked fine what are the odds of that . but this one wont

Any Answers or Help ?

Thanks
Jed

[wilsey]

NandPro 2.c was bugged release and should not be used!!
Get yourself NandPro 2.B /NandPro 2.D

You might need to short the pins on the nand to read it again, but be carefull!!

http://www.elitemodscene.com/forums/viewtopic.php?f=45&t=30

[[Jed]]

QUOTE(wilsey @ Feb 24 2010, 01:45 PM)

NandPro 2.c was bugged release and should not be used!!
Get yourself NandPro 2.B /NandPro 2.D

You might need to short the pins on the nand to read it again, but be carefull!!

http://www.elitemodscene.com/forums/viewtopic.php?f=45&t=30

I will try it later as i am at work atm, But thanks for reply as i was going out and was enarly losing it trying to fix it (IMG:style_emoticons/default/smile.gif)

Thanks (IMG:style_emoticons/default/smile.gif)

Jed