Print

[kaiyote20]

i used the x3 3294 v 16 plus bios and it turned off and everything after it was done but when i power up the xbox it turns on for like 2 secs and then turns back off, it wont turn on when i switch banks either, please help all i want for christmas is a modded xbox, sry for so many posts but this is my first time, thanx

[bucko]

Only use that if you have a 1.6/b/c Xbox!

Use the normal X3 bios if you have a 1.0-1.5 Xbox,

Also check youre switch bank is pluged in right and that the switches are set to the first 1MB bank.

If it is a 1.6/b/c your Xbox make sure your alt 5v source is soldered right.

[kaiyote20]

so i can jus flash it with the regular x3 bios and it should work fine huh cool thanks

[kaiyote20]

now i cant even get a picture, i push the power and it turns on the off then on then off then on and the led flashed red and i get no picture, and the switch shows that the chip isnt activated, but when i boot the regular xbox bios up it works jus fine, is this fixable or did i royally mess up.     oh and when i press both the power and eject button i doesnt restart the bank or boot up normally or anything.  i probably really messed up.

xecuter 3 ce
xbox 1.4
soldered,
my first time soldering
cant remember the last bios i used i used so many that i jus cant remember

hopefully this is enough info for u to help

[abrocky]

You won't get a picture yet on this bank, becasue you possible flashed the wrong bios to your xbox.

Check you xbox version here.

Only use the X3 v16 bios if u have a v1.6/b/c xbox as alread mentioned above

You need to boot up from the back up bios in order to reflash the main bios (banks 1-4)

To boot from back-up bios - hold eject & power for couple of secs.

when flashing correct bios, make sure you do not flash the backup bios, but the main bios again.

Hth

This post has been edited by abrocky: Sep 15 2005, 01:48 PM