Print

[majinsoftware]

argghhh I just wrote out a long how to for it and firefox died while submitting, Ill just do a more basic one this time.


Boot computer with out xbox drive pluged in.
Install drivers for sata card and portIO32.
Go into device manager and check which port is the main one for the card Will be something like DC00.
then disable the card.

Restart computer with xbox drive pluged in.
One windows is booted back to device manager and turn xbox on and re-enable the card around the same time like with in 5 secs.

Open jungle flasher.
MTK flash 32.
select the main port you noted below.

Send vendor intro.


blah blah blah
rest of flashing stuff.........

[ruley]

QUOTE(rocketrollins @ Apr 20 2009, 05:02 AM)

Hi people im new to the forum and pretty new to xbox360's after i sold my ps3 to join the xbox 360 owners.
I work as a graphic designer and will exchange my knowledge for a little of someone else's, here is my problem!

I recently bought a pc of a friend and he was using it to flash xbox 360's but he needed to keep his sata card so i bought a Sata 6421A chipset which was the same as his.
When i boot up my computer connected to the xbox samsung GDR-3120L and rom ver 0079fl drive it says " HardWare Initiate failed, Please Check device !!!
The Bios does not be installed. Press <g> to continue!".
So i turned of pc and took out sata cable and followed the JungleFlasher TUT for removing drivers and installing portl032 etc then turn of pc! So i connect sata back to xbox drive and turn xbox on and then pc and open jungleflasher but still no drive found even when i scroll through l/0 Port!
If i plug drive in when pc has booted up its finds drive but gives a vendor intro error?
Please help me this is driving me nuts and ill not even start talking about my laptop sata card problems

Thanks for any help on this matter

Is it a samsung or hitachi
If its a Hitachi Use the one below. and if it is a samsung use majinsoftwares exectly

QUOTE(majinsoftware @ Apr 20 2009, 01:36 PM)

argghhh I just wrote out a long how to for it and firefox died while submitting, Ill just do a more basic one this time.
Boot computer with out xbox drive pluged in.
Install drivers for sata card and portIO32.
Go into device manager and check which port is the main one for the card Will be something like DC00.
then disable the card.

Restart computer with xbox drive pluged in.
One windows is booted back to device manager and turn xbox on and re-enable the card around the same time like with in 5 secs.

Open jungle flasher.
Hitachi GDR‐3120L
select the main port you noted below.

Send Mode B
Play 79 unlock disk
blah blah blah
rest of flashing stuff.........