Topic: Sata Vt6421 Help (Read 94 times)

Sharky · « **on:** June 10, 2006, 03:31:00 PM »

The command is mtkflash r /m orig.bin

(Dont forget the space between the r and the /)

serialkilla · « **Reply #1 on:** June 10, 2006, 07:08:00 PM »

i tried to hex edit it myself....i got it to read the orig.bin then i hex edited " that' with the 4000 / 200 ......went back in and A:mtkflash w modified.bid.....it updated a few things fast then asked me to reboot........but NOW i cant even get an origional game to play on my 360 it keeps saying to play this game put it in an origional xbox 360?

Sharky · « **Reply #2 on:** June 11, 2006, 07:21:00 AM »

you have edited your key into the firmware wrong
you only need to add the lines from offset 4000 to 4200
(this does not include the line that 4200 is on)

redo it again but before flashing the modified firmware back to the drive
download a copy of kdx 1.5 (google it)
load the firmware you patched in it and check that the key for the modified firmware that shows up in their, is the same on the original firmware that came from the dvd drive when it is flash the modified firmware back to the drive

mike69 · « **Reply #3 on:** June 11, 2006, 08:53:00 AM »

what mt vt6421 controller drivers are u talking about?

Sharky · « **Reply #4 on:** June 11, 2006, 12:52:00 PM »

I think its a typo its meant to say my vt6421 controller (lol)

serialkilla · « **Reply #5 on:** June 12, 2006, 04:38:00 PM »

i tried a few things befor reading the replies...but what i did is reflash the orig.bin and got everything back to normal.........let me ask.....do you really need to flash your firmware with xtrm0800? i read its for using mtkflash under windows..but the via chipset i have doesnt work under windows.....but anyway i reflashed my firmware with my modified.bin only...and it play origionals but not the back ups....unless im doing something wrong...i do a raw dump using wxwriper..., then use ssmerger load the iso click on detect..it comes up with the numbers..and use the ss.bin from http://www.ubclass.org/X360SS/ ... merge it , then burn it with clonecd.............AND NOTHIN

i know alot of questions...but im a total virgin at this

Sharky · « **Reply #6 on:** June 16, 2006, 07:07:00 AM »

xtrm0800.bin is not for using mtkflash under windows, it is used so that the drive can be detected under windows so that you can backup games and backup security sectors (ss.bin)

The via chipset and your dvd drive should work under windows if you flash xtreme800.bin to it ( you do not have to patch your key to xtreme0800.bin)

you may also need updated drivers for your sata card in windows, look on the via website http://www.viaarena....t.aspx?PageID=2

Also the Game and the ss.bin you use must be for the region were you live e.g. NTSC or PAL, bear in mind that their are lots of different regions for PAL that have different SS keys.

ILLusions0fGrander · « **Reply #7 on:** June 23, 2006, 05:47:00 PM »

damn... i have the above 6421 chipset.. i flashed the 0800, and the first reboot, while the 360 was still flashing on/off, my card bios picked up the drive, then in windows it wasnt there.

i then rebooted and it wasnt even recognized in the RAID card bios.

Author Topic: Sata Vt6421 Help (Read 94 times)